PERLESMITH PSAT3B Tilting TV Wall Mount Instruction Manual

Uvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your PERLESMITH PSAT3B Tilting TV Wall Mount. Please read this manual thoroughly before beginning installation and retain it for future reference. This wall mount is designed for televisions ranging from 42 to 100 inches and supports a maximum weight of 160 lbs.

Varnostne informacije

OPOZORILO: Nepravilna namestitev lahko povzroči resne telesne poškodbe in materialno škodo. Če teh navodil ne razumete ali dvomite o varnosti namestitve, se obrnite na usposobljenega monterja.

• This product is intended for installation on wood studs (16"-24" spacing), solid concrete, or brick walls only. Do not install on drywall alone.
• Prepričajte se, da lahko površina za montažo varno podpira skupno težo nosilca in televizorja.
• Ne prekoračite največje dovoljene nosilnosti 160 kg (72.5 lbs).
• Verify your TV's VESA pattern (mounting hole spacing) is compatible with the mount (200x200mm to 600x600mm).
• Za natančno lociranje lesenih stebrov vedno uporabite iskalnik stebrov.
• Med namestitvijo nosite ustrezno varnostno opremo, vključno z zaščito za oči.
• Med namestitvijo naj se otroci in hišni ljubljenčki ne zadržujejo v delovnem območju.

The PERLESMITH PSAT3B Tilting TV Wall Mount provides a secure and flexible viewing solution for large televisions.

Vsebina paketa

Please check to ensure all components are present and undamaged before installation. Refer to the included hardware bags for specific screw sizes and quantities.

• Sestavljanje stenske plošče
• TV nosilci (2)
• Komplet montažne strojne opreme (različni vijaki, podložke, distančniki, sidra)
• Raven
• Navodila za uporabo

konecview of the PERLESMITH PSAT3B wall mount components and included hardware.

Specifikacije

This diagram illustrates the available VESA patterns and compatible wall types for the mount. Do not install on drywall alone.

Nastavitev in namestitev

Follow these steps carefully to ensure a secure installation. It is recommended to have two people for TV mounting.

1. korak: Preverjanje pred namestitvijo

• Preverite vrsto stene: Ensure your wall is suitable for mounting (16"-24" wood studs, concrete, or brick).
• Check TV Size: Confirm your TV is between 42-100 inches.
• Verify VESA Pattern: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This must be between 200x200mm and 600x600mm.

Always perform these checks before beginning the installation process.

Step 2: Attach Brackets to TV Back

1. Televizor previdno položite z zaslonom navzdol na mehko, čisto površino, da preprečite poškodbe zaslona.
2. Align the TV brackets with the mounting holes on the back of your TV.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA holes.
4. Securely fasten the brackets to the TV using a screwdriver, ensuring they are centered and tight. Do not overtighten.

3. korak: Namestite stensko ploščo

1. Determine the desired height for your TV. Use a pencil to mark the center of the desired location on the wall.
2. Use a stud finder to locate the center of two adjacent wood studs (for wood stud installation) or mark drill points for concrete/brick.
3. Hold the wall plate against the wall, aligning the center with your mark and ensuring it is level using the included bubble level. Mark the drill holes.
4. Drill pilot holes at the marked locations. For wood studs, drill 7/32" (5.5mm) holes. For concrete/brick, drill 3/8" (10mm) holes and insert concrete anchors.
5. Attach the wall plate to the wall using the lag bolts and washers. Tighten securely.

Step 4: Hang TV onto Wall Plate

1. S pomočjo previdno dvignite televizor s pritrjenimi nosilci.
2. Nosilce televizorja pritrdite na zgornji rob stenske plošče.
3. Televizor previdno spustite, dokler se nosilci popolnoma ne zaskočijo s stensko ploščo.
4. Engage the safety latches located at the bottom of the TV brackets to secure the TV to the wall plate. The magnetic pull tabs can be used to lock or release the TV.

Simplified three-step installation process for the PERLESMITH TV mount.

The mount extends 6.5 inches from the wall for easy cable access and retracts to 3 inches for a low-profile poglej.

Navodila za uporabo

Nastavitev nagiba

The PERLESMITH PSAT3B mount allows for a tilt range of +5° to -15°. To adjust the tilt, loosen the tilt knobs on the side of the TV brackets, adjust the TV to your desired angle, and then tighten the knobs securely. This helps reduce glare and optimize viewing kotov.

Nastavitev vrtenja

The mount offers a ±5° swivel adjustment. This feature allows for minor horizontal adjustments to achieve a perfectly level screen after installation. Simply grasp the sides of the TV and gently rotate it to the desired position.

Prilagoditev izravnave

After installation, you can fine-tune your TV's alignment with a ±2° leveling adjustment. This ensures your TV is perfectly horizontal, even if the wall plate was not installed perfectly level.

The mount offers a ±5° swivel for optimal viewfleksibilnost.

Achieve a perfectly level TV with the ±2° leveling adjustment feature.

The secure latch system with magnetic pull tabs allows for quick and tool-free locking and unlocking of the TV.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.

• Čiščenje: Nosilec obrišite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
• Periodični pregledi: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
• Preverite glede poškodb: Redno pregledujte nosilec glede morebitnih znakov obrabe, poškodb ali korozije. Če odkrijete kakršne koli težave, prenehajte z uporabo in se obrnite na podporo strankam.

Odpravljanje težav

If you encounter issues during or after installation, refer to the following common solutions.

• TV ni raven: Use the ±2° leveling adjustment feature to fine-tune the TV's horizontal position. Ensure the wall plate was installed as level as possible.
• Difficulty Tilting: Ensure the tilt knobs on the TV brackets are sufficiently loosened before attempting to adjust the tilt. Tighten them firmly after adjustment.
• Televizija se zdi ohlapna: Double-check that all mounting bolts to the wall and screws to the TV are securely tightened. Ensure the safety latches are engaged.
• Mounting Holes Don't Align: Verify your TV's VESA pattern against the mount's specifications. If incompatible, the mount cannot be used.
• Manjkajoči deli: If any parts are missing from the package, contact PERLESMITH customer support immediately.

Garancija in podpora

This PERLESMITH product comes with a 5-year warranty. For warranty claims or technical assistance, please contact PERLESMITH customer support. You can typically find contact information on the product packaging or the official PERLESMITH webmesto.

For additional support, you may visit the PERLESMITH store on Amazon: PERLESMITH Store