AstroAI H2 Pro Cordless Tire Inflator User Manual

1. Uvod

Thank you for choosing the AstroAI H2 Pro Cordless Tire Inflator. This portable air compressor is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring dual power supplies (DC 12V and built-in lithium battery), automatic shut-off, and an LED display, this device ensures reliable performance wherever you go. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Varnostna navodila

• Always ensure the inflator is placed on a stable, flat surface during operation to prevent movement due to vibration.
• Med uporabo ne puščajte napihovalnika brez nadzora.
• Allow the pump to cool for at least 10 minutes after 15 minutes of continuous use to prevent overheating.
• Napravo hranite izven dosega otrok in hišnih ljubljenčkov.
• Napihovalnika ne uporabljajte v mokrih pogojih ali v bližini vnetljivih tekočin ali plinov.
• Ensure the correct pressure is set for the item being inflated to avoid over-inflation, which can cause damage or injury. Refer to the item's manufacturer recommendations for appropriate pressure levels.
• Disconnect the power source when not in use or before performing any maintenance.

3. Vsebina paketa

• AstroAI H2 Pro Cordless Tire Inflator
• DC 12V Power Cable
• Air Hose with Screw-on Connector
• Različni adapterji za šobe (za žoge, kolesa itd.)
• Uporabniški priročnik

4. Izdelek je končanview

The AstroAI H2 Pro is a compact and versatile tire inflator designed for ease of use and portability. It features a digital display, intuitive controls, and a built-in LED light for nighttime use.

Figure 1: AstroAI H2 Pro Cordless Tire Inflator, showcasinzaradi svoje kompaktne zasnove in integriranega ročaja.

Ključne značilnosti:

• Dual Power Supplies: Operates via DC 12V car power outlet or built-in lithium battery for maximum flexibility.
• Hitra inflacija: Upgraded cylinder design for quicker inflation times.
• Samodejno izklop: Samodejno se ustavi, ko je dosežen prednastavljeni tlak.
• LED zaslon: Clear digital display shows real-time pressure and preset values.
• Več enot: Supports PSI, BAR, KPA, and KG/CM².
• Vgrajena LED lučka: Zagotavlja osvetlitev za uporabo v slabih svetlobnih pogojih.
• Integrirano shranjevanje: Convenient compartment for storing accessories.

Figure 2: Close-up of the AstroAI H2 Pro's LED display and control buttons for setting pressure and units.

5. Nastavitev

Before first use, ensure the device is fully charged if using the battery power supply. Connect the DC 12V power cable to your vehicle's cigarette lighter socket or ensure the internal battery is charged.

Figure 3: Demonstrates connecting the AstroAI H2 Pro using either the DC 12V power cable or utilizing its internal battery.

Connecting the Air Hose:

1. Uncoil the air hose from its storage compartment.
2. Screw the air hose connector onto the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.

6. Navodila za uporabo

Step-by-Step Inflation:

1. Vklop: Connect the power source (DC 12V or internal battery) and press the power button to illuminate the screen.
2. Izberite enoto: Press the 'M' button to cycle through the available pressure units (PSI, BAR, KPA, KG/CM²) until your desired unit is displayed.
3. Nastavi tlak: Use the '+' and '-' buttons to set the target pressure value. The screen will display both the preset value and the current pressure.
4. Povežite se s pnevmatiko: Securely attach the air hose to the tire valve stem.
5. Začetek inflacije: Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.
6. Prekini povezavo: Once inflation is complete, disconnect the air hose from the valve stem and store the hose and power cable in their designated compartments.

Uporaba LED luči:

The built-in LED light can be activated by pressing the light button. It offers different modes, including a steady light for illumination and a strobe light for emergency signaling.

Figure 4: The AstroAI H2 Pro demonstrating its built-in LED light, useful for nighttime or low-light conditions.

Vsestranske aplikacije:

The AstroAI H2 Pro is suitable for a wide range of inflation needs:

• Avtomobili: Inflates a flat tire (0 PSI to 36 PSI) in approximately 4 minutes and 30 seconds.
• Motorna kolesa: Ideal for maintaining optimal tire pressure.
• kolesa: Includes adapters for various bicycle valve types.
• Športne žoge: Easily inflates basketballs, footballs, and other inflatables with the appropriate nozzle.

Figure 5: The AstroAI H2 Pro shown inflating various items, including car tires, motorcycle tires, bicycle tires, and sports balls.

7. Vzdrževanje

• Čiščenje: Obrišite zunanjost napihovalnika z oglasomamp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
• Shranjevanje: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cable are neatly stored in the integrated compartments.
• Vzdrževanje baterije: If using the battery, charge it regularly, even if not in frequent use, to prolong its lifespan.
• Pregled cevi: Periodically check the air hose for any signs of wear, cracks, or damage. Replace if necessary.

Figure 6: The AstroAI H2 Pro with its integrated storage compartment open, showing how accessories are neatly organized.

8. Odpravljanje težav

9. Specifikacije

10. Garancija in podpora

The AstroAI H2 Pro Cordless Tire Inflator comes with a 2-letna garancija proizvajalca. For warranty claims, technical support, or any questions regarding your product, please contact AstroAI customer service. You can typically find contact information on the official AstroAI webspletnega mesta ali prek vaše nakupovalne platforme.

Prosimo, shranite dokazilo o nakupu za potrditev garancije.