microSHIFT Estes RD-M220L Rear Derailleur User Manual

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your microSHIFT Estes RD-M220L Rear Derailleur. Please read this manual thoroughly before use to ensure safe and optimal performance.

The microSHIFT Estes RD-M220L is a long cage rear derailleur designed for 7, 8, and 9-speed mountain bike drivetrains. It is compatible with cassettes featuring a maximum cog size of 34-40 teeth and offers a total chain wrap capacity of 45 teeth.

2. Varnostne informacije

OPOZORILO:

• Always wear appropriate safety gear, including eye protection, when installing or maintaining bicycle components.
• Prepričajte se, da so vsi vijaki priviti z navorom, ki ga je določil proizvajalec. Premočno ali premalo privijanje lahko povzroči okvaro komponente.
• If you are unsure about any installation or adjustment procedure, consult a professional bicycle mechanic.
• Keep hands and clothing clear of moving parts, especially the chain and cogs, during operation and adjustment.

3. Komponenta Konecview

The microSHIFT Estes RD-M220L Rear Derailleur consists of several key parts:

• Derailleur Body: The main structure housing the pivot points and springs.
• Kletka: The long cage assembly that guides the chain, including the upper and lower jockey wheels.
• B-Tension Screw: Adjusts the distance between the upper jockey wheel and the largest cassette cog.
• High (H) Limit Screw: Prevents the derailleur from shifting the chain beyond the smallest cog.
• Low (L) Limit Screw: Prevents the derailleur from shifting the chain beyond the largest cog.
• Cable Anchor Bolt: Secures the shift cable to the derailleur.

Figure 1: microSHIFT Estes RD-M220L Rear Derailleur. This image shows the overall structure of the derailleur, highlighting its long cage design and black finish.

4. Namestitev in nastavitev

4.1 Potrebna orodja

• Hex wrenches (typically 5mm)
• Rezalniki kablov
• Momentni ključ (priporočeno)
• Kolesarska mast

4.2 Derailleur Mounting

1. Apply a small amount of grease to the derailleur hanger threads on your bicycle frame.
2. Thread the derailleur mounting bolt into the hanger. Ensure the B-knuckle tab is correctly positioned against the hanger stop.
3. Tighten the mounting bolt to the manufacturer's specified torque (typically 8-10 Nm).

4.3 Namestitev verige

1. Route the chain through the front derailleur (if applicable), over the smallest chainring, and then through the rear derailleur cage. Ensure the chain passes correctly over the upper and lower jockey wheels.
2. Connect the chain using a master link or chain pin according to the chain manufacturer's instructions.

4.4 Cable Routing and Attachment

1. Route the shift cable from your shifter through the frame's cable guides and into the derailleur's cable housing stop.
2. Pull the cable taut and secure it under the cable anchor bolt. Do not overtighten initially.

4.5 Limit Screw Adjustment (H and L)

Limit screws prevent the chain from shifting off the smallest or largest cog.

1. High (H) Limit: Shift the chain to the smallest cog on the cassette. Adjust the H-screw so that the upper jockey wheel is directly aligned with the smallest cog. The chain should run smoothly without rubbing.
2. Low (L) Limit: Shift the chain to the largest cog on the cassette. Adjust the L-screw so that the upper jockey wheel is directly aligned with the largest cog. The chain should run smoothly without rubbing.

4.6 Nastavitev napetosti B

Vijak za napenjanje B nastavi razdaljo med zgornjim podpornim kolesom in zobniki kasete.

1. Shift the chain to the largest cog on the cassette.
2. Adjust the B-tension screw until there is a gap of approximately 5-6mm between the top of the largest cog and the top of the upper jockey wheel. This ensures smooth shifting and prevents the jockey wheel from rubbing the cassette.

5. Delovanje

The microSHIFT Estes RD-M220L derailleur operates in conjunction with a compatible 7, 8, or 9-speed shifter. Shifting is achieved by pulling or releasing the shift cable, which moves the derailleur cage laterally across the cassette.

• Prestavljanje navzgor (na manjše zobnike): Press the shifter lever to release cable tension, allowing the derailleur to move the chain to smaller cogs.
• Prestavljanje navzdol (na večje zobnike): Press the shifter lever to pull the cable, moving the derailleur to larger cogs.

For optimal performance, avoid shifting under heavy pedaling load. Ease off the pedals slightly during shifts for smoother transitions and to prolong drivetrain component life.

6. Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your derailleur.

6.1 Čiščenje

• Periodically clean the derailleur body, cage, and jockey wheels with a degreaser and brush.
• Temeljito sperite z vodo in popolnoma posušite.

6.2 Mazanje

• Apply a small amount of bicycle chain lubricant to the pivot points of the derailleur and the jockey wheel bearings.
• Wipe off any excess lubricant to prevent dirt accumulation.

6.3 Pregled

• Regularly check for bent derailleur hangers, which can cause poor shifting.
• Inspect jockey wheels for wear. Worn jockey wheels can lead to noisy operation and inefficient shifting. Replace if necessary.
• Preverite pravilno zategnjenost vseh vijakov.

7. Odpravljanje težav

8. Specifikacije

9. Informacije o garanciji

The microSHIFT Estes RD-M220L Rear Derailleur comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official microSHIFT website. This warranty typically covers manufacturing defects but does not cover damage due to improper installation, misuse, neglect, or normal wear and tear.

10. Podpora strankam

For technical assistance, spare parts, or warranty claims, please contact your local microSHIFT dealer or visit the official microSHIFT webspletno mesto za vire podpore in kontaktne podatke.

Webspletno mesto: www.microshift.com (Npramppovezava, dejanska povezava se lahko razlikuje)