REPTITRIP Dual Reptile Light Fixture with Timer & PID Dimming Thermostat Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your REPTITRIP Dual Reptile Light Fixture. This device is designed to manage two lamp sockets independently: one with a PID dimming thermostat for precise temperature control and another with a programmable timer for day/night heating and lighting cycles. Proper use ensures a stable and healthy environment for your reptiles.

Image 1.1: REPTITRIP Dual Reptile Light Fixture with its integrated controller and temperature probe.

2. Varnostne informacije

Please read all safety instructions before operating the device to prevent injury or damage.

• Prepričajte se, da je napajalnik voltage matches the device's requirements (100-120V, 50Hz).
• Ne prekoračite največje wattage 160 W na vtičnico.
• Thermostat Socket Warning: Do NOT use full-spectrum sun lamps, UVB bulbs, LED lights, or energy-saving bulbs in the thermostat socket. This socket is designed for heat-emitting bulbs only (e.g., ceramic heat emitters, infrared lamps, basking spot bulbs).
• Keep the device and power cords away from water and excessive moisture.
• Always unplug the device from the power outlet before performing any maintenance, cleaning, or bulb replacement.
• The high-temperature warning label on the lamp will turn red if the surface temperature exceeds 113°F (45°C). This indicates high heat and can also confirm bulb functionality.
• Poskrbite za ustrezno prezračevanje okoli napeljave, da preprečite pregrevanje.

3. Vsebina paketa

Preverite, ali so v paketu prisotne vse komponente:

• Dual Reptile Light Fixture with integrated controller
• Temperaturna sonda
• Navodila za uporabo

4. Značilnosti izdelka

The REPTITRIP Dual Reptile Light Fixture offers advanced control for your terrarium environment:

• Dual Socket Control: Manages two lamp sockets independently for diverse environmental needs.
• PID Dimming Thermostat: One socket provides precise temperature regulation (50-140°F) by adjusting bulb brightness, ensuring stable heat without large fluctuations.
• Programabilni časovnik: The second socket features a timed on/off function with a selectable duration of 1-24 hours, ideal for simulating natural day/night cycles.
• LCD zaslon: A clear screen shows set temperature, current probe temperature, output power, and timer duration for easy monitoring.
• Enhanced Reflection: The polished interior surface of the fixture optimizes light and UVB reflection, improving bulb efficiency.
• Učinkovito odvajanje toplote: Multiple ventilation holes prevent bulb damage from overheating, extending bulb lifespan.

Slika 4.1: Konecview of the controller's display and buttons.

Image 4.2: The aluminum dome interior designed for enhanced reflection.

5. Nastavitev

Follow these steps to set up your REPTITRIP Dual Reptile Light Fixture:

1. Sestavite napeljavo: Place the fixture securely on top of your terrarium mesh lid or suspend it using appropriate hanging accessories (not included).
2. Vstavite žarnice: Screw the desired bulbs into each socket. Ensure bulbs are compatible with the respective socket's function (refer to Section 4).
3. Priključite krmilnik: Ensure the controller is securely connected to the fixture.
4. Položaj temperaturne sonde: Place the temperature probe inside the terrarium where you need to monitor and maintain the temperature. For accurate readings, position it directly under the heat source but out of direct contact with the bulb or animal.
5. Plug In: Napajalni vtič priključite v ustrezno električno vtičnico.

Image 5.1: Fixture installed over a terrarium with the controller in use.

Image 5.2: Visual guide for assembling the fixture components.

Image 5.3: Recommended temperature sensor placement.

6. Navodila za uporabo

6.1. Thermostat Socket Operation

The thermostat socket regulates temperature using PID dimming control. It is suitable for ceramic heat emitters, infrared lamps, and basking spot bulbs (max 160W).

Image 6.1.1: Compatible bulb types for the thermostat socket.

1. Nastavitev ciljne temperature: Press the 'TEMP' button on the controller. Use the '+' and '-' buttons to adjust the desired temperature between 50-140°F. The display will show the set temperature.
2. Monitor: The controller will automatically adjust the power output to the bulb to maintain the set temperature, displaying the current probe temperature and output power percentage.
3. Pomembna opomba: If the target temperature is not reached, consider using a higher wattage bulb (up to 160W). Ensure the temperature probe is correctly placed.

Image 6.1.2: How to set the target temperature.

6.2. Timer Socket Operation

The timer socket provides timed on/off functionality for lighting or heating elements. It is compatible with a wider range of bulbs including full-spectrum sun lamps, UVB bulbs, LED lights, and energy-saving bulbs (max 160W).

Image 6.2.1: Compatible bulb types for the timer socket.

1. Set Timer Duration: Press the 'U/TIME' button on the controller. Use the '+' and '-' buttons to select the desired operating duration (1-24 hours). The cycle starts immediately after configuration.
2. Ponastavitev časovnika: If the timer loses power and is re-energized, the on/off time points will reset based on the re-powering time as the new starting point. Reconfigure the timer if this occurs.

Image 6.2.2: How to set the timer.

6.3. Setting Example

Slika 6.3.1: Primerample settings for a terrarium environment.

Na primerample, to set a sun lamp for 8 hours daily and a ceramic heat emitter to maintain 85°F:

• Timer Socket (Sun Lamp): Set the timer to '8H'. The sun lamp will turn on for 8 hours from the moment the timer is set.
• Thermostat Socket (Ceramic Heat Emitter): Set the target temperature to '85°F'. The ceramic heat emitter will adjust its output to maintain this temperature continuously.

6.4. Navodila za videoposnetek

7. Vzdrževanje

Regular maintenance ensures optimal performance and longevity of your fixture:

• Čiščenje: Disconnect power before cleaning. Wipe the exterior of the fixture and controller with a dry, soft cloth. Do not use abrasive cleaners or immerse any part in water.
• Zamenjava žarnice: Ensure the fixture is unplugged and bulbs are cool before replacing. Screw in new bulbs gently to avoid damage.
• Skrb za sondo: Periodically check the temperature probe for any damage or debris. Clean gently if necessary.

8. Odpravljanje težav

Če naletite na težave, si oglejte naslednji vodnik za odpravljanje težav:

9. Specifikacije

Image 9.1: Physical dimensions of the fixture.

10. Garancija in podpora

For warranty information, please refer to the manufacturer's warranty description provided with your purchase or visit the official REPTITRIP website. For technical support or further assistance, please contact REPTITRIP customer service through their official channels.