1. Uvod
This manual provides essential information for the safe and efficient operation of your DATOUBOSS 12V 1800W Hybrid Solar Inverter. This device integrates a solar charge controller, an inverter, and a battery charger into one unit, offering a comprehensive solution for off-grid and hybrid power systems. It is designed to convert 12V DC power to 230V AC pure sine wave power, suitable for various household and office appliances.
Pred namestitvijo in uporabo natančno preberite ta priročnik in ga shranite za poznejšo uporabo.
2. Varnostna navodila
Observe the following safety precautions during installation, operation, and maintenance:
- Namestitev mora opraviti usposobljeno osebje.
- Ensure all wiring is correctly connected and securely fastened to prevent loose connections that can cause overheating.
- Razsmernika ne izpostavljajte dežju, snegu, pršenju ali katerim koli tekočinam.
- Ne razstavljajte enote. V notranjosti ni delov, ki bi jih lahko uporabnik popravil.
- Zagotovite zadostno prezračevanje okoli razsmernika, da preprečite pregrevanje.
- Med namestitvijo in vzdrževanjem nosite ustrezno osebno zaščitno opremo (OZO).
- Disconnect all power sources (solar, battery, AC grid) before performing any maintenance or wiring.
- This inverter is designed for indoor use or in a protected environment.
3. Izdelek je končanview
The DATOUBOSS Hybrid Solar Inverter combines three functions in one unit: a solar inverter, a battery charger, and an MPPT charge controller. This design simplifies cabling and optimizes space utilization.
Slika 3.1: Spredaj view of the DATOUBOSS Hybrid Solar Inverter showing key features and dimensions. The inverter has a maximum PV input power of 2500W, maximum PV input current of 15A, and a rated input voltage of 220V/230V/240V. Dimensions are approximately 31 cm (12.2 in) height, 25 cm (9.8 in) width, and 9.1 cm (3.58 in) depth.
3.1 Identifikacija komponent
Slika 3.2: Podrobno view of the inverter's interfaces. The front panel features an LCD display and function key control area. The right side includes an RS485-2 communication interface (BMS communication). The left side has a power on/off switch and an RS485-1 communication interface (External communication/WIFI). The bottom interface includes AC input (on-grid) terminal, Earth wire, AC output, Fan, Battery terminal port, and PV input terminal port.
4. Nastavitev in namestitev
The inverter is designed for wall-mounted installation. Ensure the mounting surface is strong enough to support the unit's weight and that there is sufficient clearance for ventilation.
4.1 Shema ožičenja
Pazljivo sledite shemi ožičenja. Vse povezave morajo biti varne in pravilno polarizirane.
Figure 4.1: Wiring diagram illustrating connections for the solar system, power grid, 12V battery, and AC output. The solar input connects to the PV input terminal, the grid connects to the AC input terminal, the 12V battery connects to the battery terminal, and loads connect to the AC output terminal.
Figure 4.2: Comprehensive wiring and technical specifications diagram. This image details the connections for the solar system (Max PV Input Power 2500W, MPPT Tracking Range 30-240VDC), power grid (Rated Voltage 220V/230V/240V), 12V battery (Lead-acid/Lithium, Max PV Charging Current 100A), and AC output (Rated Output Power 1800W, Pure Sine Wave).
4.2 Koraki povezave
- Montaža: Securely mount the inverter to a vertical surface using appropriate fasteners.
- Priključek baterije: Connect the 12V battery bank to the battery terminals. Ensure correct polarity (positive to positive, negative to negative).
- Povezava solarnega panela: Priključite sončno celico na vhodne priključke PV. Upoštevajte pravilno polarnost in se prepričajte, da je odprti tokokrog PV napet.tage je v določenem območju.
- AC Input (Grid) Connection: If connecting to the utility grid, connect the AC input from the grid to the designated AC input terminals.
- Priključek izhoda AC (obremenitev): Priključite izmenične obremenitve na izhodne izmenične priključke.
- Ozemljitev: Connect the inverter to an earth ground using the designated earth wire terminal.
- Vklop: After verifying all connections, switch on the power.
5. Navodila za uporabo
The inverter features an LCD display and control buttons for configuration and monitoring.
5.1 LCD-zaslon in upravljanje
The LCD displays real-time system status, including voltage, power, battery status, and operational mode. Error codes are displayed for quick troubleshooting.
5.2 načini polnjenja
The inverter offers versatile charging and output modes to suit different energy management needs:
Figure 5.1: Illustration of the four charging modes and three charge output working modes. Charging modes include AC priority, Solar priority, Mixed loading (Solar and mains), and Solar only. Output modes include Solar priority, Utility priority, and SBU mode (Solar-Battery-Utility).
- Štirje načini polnjenja:
- AC Priority: If no mains power is available, the battery is charged using solar energy.
- Prioriteta sončne energije: Charging with solar energy priority. If no solar power is available, the battery is charged via the power grid.
- Mixed Loading: Solar and mains power can charge the battery at the same time.
- Samo sončna energija: The battery can only be charged using solar energy.
- Three Configurable Output Modes:
- Prioriteta PV: Prednost daje energiji iz sončnih panelov.
- Grid Priority: Prednost daje električni energiji iz komunalnega omrežja.
- Hybrid Inverter Priority (SBU Mode): Prednost daje sončni elektrarni, nato baterijam in šele nato komunalnim storitvam.
6. Združljivost baterij
The inverter is compatible with various 12V battery types, including lead-acid (sealed, AGM, gel, flooded) and lithium batteries. It features a built-in Battery Management System (BMS) to prevent overcharging and deep discharging, extending battery life.
Figure 6.1: The inverter supports various battery types including GSL (Gel Sealed Lead-Acid), LN (Lithium-ion), FLB (Flooded Lead-Acid), LI (LiFePO4), SLA (Sealed Lead-Acid), and USER-defined. Users can configure the battery type via the LCD display. The maximum battery charging current is 100A.
7. Spremljanje
The inverter provides real-time monitoring capabilities through its integrated LCD display and optional WiFi module.
7.1 Spremljanje omrežja Wi-Fi
With the optional WiFi module, users can monitor the inverter's performance in real-time via a web interface or a dedicated mobile application, eliminating the need to check the controller's LCD directly.
Figure 7.1: The inverter is WiFi monitoring ready, allowing users to view system performance remotely via a web brskalnik ali mobilna aplikacija.
8. Zaščitne funkcije
The DATOUBOSS Hybrid Solar Inverter incorporates multiple protection features to ensure safe and reliable operation of your power system.
Figure 8.1: The inverter provides comprehensive protection against overload, short circuit, and surge hazards. Specific protections include reverse connection protection, short circuit protection, high temperature protection, overload protection, overcurrent protection, and over-discharge protection.
Figure 8.2: This diagram highlights the inverter's multiple protection features, including overvoltage protection, short circuit protection, overcharge protection, over-discharge protection, temperature protection, undervoltage protection, overload protection, and overcurrent protection.
9. Specifikacije
Detailed technical specifications for the DATOUBOSS 12V 1800W Hybrid Solar Inverter (Model: DT-1218M-A-EU).
Figure 9.1: Detailed technical parameters including Product Name: Solar Inverter, Model: DT-1218M, Protection Degree: IP20, Rated Power: 1800W. Battery parameters: DC Input 12VDC, Max. AC Charging Current 65A, Max. PV Charging Current 100A, Max. Charging Current 100A. PV Input parameters: Max. PV Input Power 2500W, Max. PV Input Voltage (Voc) 300VDC, Max. PV Input Current 15A, MPPT Tracking Range 30-240VDC, Rated PV Input Voltage 180VDC, Number of MPPT: 1.
Figure 9.2: Technical specifications for Model DT-1218M. Includes PV input (Max PV Power 2500W, MPPT Tracking Range 30-240VDC), Battery & Charging (Type: Custom, 12VDC, Max PV Charging Current 100A), Hybrid Operation (Rated Input Voltage 220V/230V/240V, Rated Output Power 1800W, Pure Sine Wave), AC Input/Output, Regular Parameters (Max Conversion Efficiency 94%, MPPT Tracking Efficiency >99.9%), Environment (Operating Temp -10°C to 50°C), Dimension and Weight (Product Size 310x250x91mm, N.W. 4.0kg), and Protection features.
Figure 9.3: Continuation of technical specifications, detailing On-Grid Operation (Rated Output Power 1800W, 220V/230V/240VAC), Off-Grid Operation (Rated Input Voltage 220V/230V/240V, Rated Output Power 1800W, Pure Sine Wave), and environmental conditions.
| Parameter | Vrednost |
|---|---|
| Znamka | DATOUBOS |
| Številka modela | DT-1218M-A-EU |
| Nazivna moč | 1800 vatov |
| voltage | 12 volta |
| Največja vhodna moč PV | 2500 W |
| Največja PV vhodna glasnosttage (glas) | 300V DC |
| Obseg sledenja MPPT | 30-240V DC |
| Največji PV vhodni tok | 15A |
| Največji hibridni polnilni tok | 100A |
| AC izhod Voltage | 220V/230V/240V AC |
| AC izhodna frekvenca | 50/60Hz |
| Izhodna valovna oblika | Čisti sinusni val |
| Združljivost baterij | 12V Lead-acid (sealed, AGM, gel, flooded), Lithium |
| Stopnja zaščite | IP20 |
| Delovna temperatura | -10°C do 50°C |
| Dimenzije (D*Š*V) | 310 x 250 x 91 mm |
| Neto teža | 4.0 kg |
10. Odpravljanje težav
This section provides guidance for common issues. The LCD display will show error codes to assist in diagnosis.
| Koda napake / Simptom | Možen vzrok | rešitev |
|---|---|---|
| Alarm za preobremenitev | Priključena obremenitev presega nazivno moč razsmernika. | Reduce the connected load. Check appliance power ratings. |
| Kratek stik | Short circuit detected at AC output. | Disconnect all loads and check wiring for shorts. |
| Visoka temperatura | Pretvornik se pregreva zaradi slabega prezračevanja ali prekomerne obremenitve. | Ensure adequate airflow around the unit. Reduce load if necessary. Check fan operation. |
| Nizka napetost baterijetage | Baterija voltage is below the acceptable threshold. | Charge the battery. Check battery connections and health. |
| PV Overvoltage | Vhod sončne plošče voltage exceeds maximum limit. | Verify solar panel configuration and ensure Voc is within range. |
Če težava po poskusu teh rešitev še vedno obstaja, se obrnite na podporo strankam.
11. Vzdrževanje
Redno vzdrževanje zagotavlja optimalno delovanje in dolgo življenjsko dobo vašega inverterja.
- Čiščenje: Zunanjost pretvornika redno čistite s suho krpo. Prepričajte se, da so prezračevalne odprtine brez prahu in umazanije.
- Preverjanje povezave: Annually inspect all wiring connections (battery, solar, AC input/output) for tightness and corrosion. Tighten any loose connections.
- Pregled baterije: Regularly check the battery terminals for corrosion and ensure they are clean and tight. For flooded lead-acid batteries, check electrolyte levels and top up with distilled water if necessary.
- Okoljski pregled: Zagotovite, da temperatura in vlažnost okolja v namestitvi ostane znotraj določenih območij.
12. Garancija in podpora
The DATOUBOSS 12V 1800W Hybrid Solar Inverter comes with a 2-letna garancija proizvajalca.
For technical support, warranty claims, or service inquiries, please contact your retailer or DATOUBOSS customer service. Provide your product model number (DT-1218M-A-EU) and serial number (if applicable, e.g., S/N:86HFP1800250627507500-405) when contacting support.