VTOMAN X3 Jump Starter with Air Compressor and V-Truck Pro Jump Starter User Manual

1. Uvod

This manual provides detailed instructions for the safe and effective use of your VTOMAN X3 Jump Starter with Air Compressor and VTOMAN V-Truck Pro Jump Starter. These devices are designed to provide reliable power for jump-starting vehicles and other emergency needs. Please read this manual thoroughly before operation and retain it for future reference.

VTOMAN X3 Jump Starter z zračnim kompresorjem

The VTOMAN X3 is an all-in-one portable device combining a 3500A peak current jump starter, a 160 PSI air compressor, an LED light, an SOS alarm, and a USB charging port. It is designed for jump-starting vehicles with up to 9L gas or 8.5L diesel engines and for inflating tires with precision.

VTOMAN V-Truck Pro Jump Starter

The VTOMAN V-Truck Pro is a heavy-duty portable jump starter delivering an 8000A peak current. It is compatible with all 12V vehicles, including trucks, RVs, tractors, boats, and other large-displacement diesel engines. It also features a 41600mAh power bank with 65W fast charging capabilities for various electronic devices.

2. Varnostne informacije

Always observe the following safety precautions to prevent personal injury or damage to the device and vehicle.

• Pred uporabo preberite vsa navodila.
• Pri delu z baterijami nosite zaščito za oči in zaščitno obleko.
• Ensure the work area is well-ventilated. Do not smoke or allow sparks or flames near the battery or jump starter.
• Keep the device dry. Do not expose it to rain or wet conditions.
• Hraniti izven dosega otrok.
• Ne poskušajte zagnati zamrznjenega akumulatorja s pomočjo kablov.
• Ne povezujte pozitivnega in negativnega clamps skupaj.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Do not over-inflate tires. Always monitor pressure during inflation.
• Ne razstavljajte enote. Servisiranje prepustite usposobljenemu osebju.

3. Izdelek je končanview

VTOMAN X3 Components

• Jump Starter Port
• Priključek za zračno cev
• USB izhodna vrata
• Zaslon LED
• Control Buttons (+, -, M)
• LED svetilka

Image: The VTOMAN X3 unit displaying its LED screen with battery level, preset pressure, real-time pressure, tire pressure unit, and inflation mode indicators. Various buttons are visible for control.

VTOMAN V-Truck Pro Components

• Jump Starter Port
• DC vhodna vrata
• Vhodna/izhodna vrata USB-C
• USB-A Output Ports (A1, A2)
• LED indikatorji baterije
• Gumb za vklop

Image: The VTOMAN V-Truck Pro jump starter connected to a vehicle battery with its heavy-duty clamps. The unit's ports and LED indicators are visible.

4. Nastavitev

Začetno polnjenje

Before first use, fully charge your VTOMAN jump starter. It is recommended to fully charge the unit after each use and at least every 3-6 months to maintain battery health.

• VTOMAN V-Truck Pro: Connect the provided 65W charger to the DC input port. A full charge takes approximately 2.5 hours for the 41600mAh battery.
• VTOMAN X3: Connect a compatible USB-C charger to the USB-C input port. The LED screen will indicate charging status.

Image: The VTOMAN V-Truck Pro unit acting as a portable power bank, charging a smartphone, iPad, earphone, smart watch, camera, drone, and game console via its USB ports.

5. Navodila za uporabo

5.1. Zagon vozila s pomočjo kablov

Ensure your jump starter is sufficiently charged before attempting to jump-start a vehicle.

1. Izklopite kontakt vozila in vso dodatno opremo (luči, radio itd.).
2. Priključite rdeči (+) clamp zagonskih kablov na pozitivni (+) pol praznega akumulatorja vozila.
3. Povežite črni (-) klamp of the jumper cables to the negative (-) terminal of the vehicle's dead battery, or to a solid, unpainted metal part of the vehicle's chassis away from the battery.
4. Insert the jumper cable plug firmly into the jump starter's jump start port.
5. Start the vehicle's engine. If it does not start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
6. Once the vehicle starts, immediately disconnect the jumper cable plug from the jump starter.
7. Remove the black (-) clamp from the vehicle, then remove the red (+) clamp.

Združljivost motorja:

• VTOMAN X3: Up to 9L Gas / 8.5L Diesel Engines.
• VTOMAN V-Truck Pro: All Gas / All Diesel Engines (12V vehicles).

Image: The VTOMAN X3 jump starter connected to a car battery, demonstrating the jump-starting process. The unit's display shows operational status.

5.2. Using the Air Compressor (VTOMAN X3 Only)

The VTOMAN X3 features a 160 PSI air compressor with auto-shutoff.

1. Screw the air hose onto the tire valve stem.
2. Connect the other end of the air hose to the air hose port on the VTOMAN X3.
3. Power on the X3 unit. The LED screen will display the current tire pressure.
4. Press the 'M' button to cycle through preset modes (Car, Motorcycle, Bicycle, Ball, Custom) or to select desired pressure units (PSI, KPA, BAR).
5. Za nastavitev ciljnega tlaka uporabite gumba '+' in '-'.
6. Press the power button to start inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the X3 unit.

Image: The VTOMAN X3 unit connected to a car tire valve, actively inflating the tire. The digital display shows the pressure reading and inflation status.

5.3. Uporaba kot prenosna powerbanka

Both VTOMAN jump starters can charge electronic devices.

• Connect your device's USB charging cable to the appropriate USB-A or USB-C output port on the jump starter.
• Naprava se bo začela polniti.
• VTOMAN V-Truck Pro: Features a 41600mAh capacity and 65W fast charging output, capable of charging a smartphone approximately 8-10 times.

5.4. Using the LED Light / SOS Function (VTOMAN X3 Only)

The VTOMAN X3 includes an integrated LED flashlight with SOS capabilities.

• Press and hold the dedicated light button (if available) or the power button (refer to specific model instructions) to turn on the LED light.
• Press again to cycle through different modes (e.g., steady on, strobe, SOS).
• Pritisnite in držite za izklop.

6. Vzdrževanje

Proper maintenance ensures the longevity and optimal performance of your VTOMAN jump starter.

• Čiščenje: Napravo obrišite s suho, mehko krpo. Ne uporabljajte agresivnih kemikalij ali abrazivnih čistil.
• Shranjevanje: Zaganjalnik shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Polnjenje: Recharge the unit fully after each use. If not used frequently, recharge at least every 3-6 months to prevent deep discharge and prolong battery life.
• Pregled kabla: Regularly inspect jumper cables and air hoses for any signs of damage, wear, or corrosion. Replace if necessary.

7. Odpravljanje težav

If you encounter issues with your VTOMAN jump starter, refer to the following common problems and solutions.

8. Specifikacije

9. Garancija in podpora

For detailed warranty information, please refer to the official VTOMAN website or the warranty card included with your product packaging. For technical support, troubleshooting assistance, or replacement parts, please contact VTOMAN customer service through their official channels.