GEYA GPS6-VAK 2P-80A-220V Adjustable Over/Under Voltage in tokovni ščitnik

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the GEYA GPS6-VAK 2P-80A-220V Adjustable Over/Under Voltage and Current Protector. This device is designed to safeguard electrical appliances and circuits from damage caused by voltage fluctuations (overvoltage, podzvtage) and excessive current (overcurrent). It also features an integrated Kilowatt-hour (KWH) measurement function for energy monitoring.

Pred namestitvijo in uporabo natančno preberite ta priročnik, da zagotovite pravilno delovanje in varnost.

2. Varnostne informacije

OPOZORILO: Nevarnost električnega udara. Namestitev in vzdrževanje naj izvaja samo usposobljeno osebje.

• Pred namestitvijo ali servisiranjem naprave vedno izklopite napajanje.
• Ensure proper wiring according to local electrical codes and the provided wiring diagram.
• Naprave ne uporabljajte, če je poškodovana ali ne deluje pravilno.
• Napravo hranite stran od vode in prekomerne vlage.
• Preverite, ali voltagNazivne vrednosti električne energije in toka naprave ustrezajo zahtevam vaše aplikacije.

3. Značilnosti izdelka

• Pametni digitalni zaslon: A clear LED screen displays real-time voltage, current, and fault status for quick monitoring.
• Napredna zaščita: Provides protection against overvoltage in podvoltage. Factory default settings are 275V for overvoltage and 175V for undervoltage, ensuring appliance safety.
• Nastavljivi parametri: Available in 40A, 63A, and 80A variants, the GPS6 accommodates a wide range of electrical loads.
• Vsestranska uporaba: Offers a factory default reset time of 30 seconds, adjustable from 2 to 900 seconds to meet specific needs.
• Kompaktna velikost: Ultra-small size for easy integration with 35mm DIN rail mounting, simplifying installation and providing a secure connection.
• KWH Measurement: Integrated Kilowatt-hour measurement for energy consumption monitoring.

4. Izdelek je končanview in komponente

Slika 4.1: Spredaj view of the GEYA GPS6-VAK protector, showing the large-screen color digital display. The display indicates voltage (V), current (A), and cumulative KWH. Control buttons (SET, Up, Down, Power) are located below the screen.

The GEYA GPS6-VAK protector features a clear digital display and intuitive controls for easy monitoring and configuration. Key components include:

• Digitalni zaslon: Prikazuje glasnost v realnem časutage, current, and KWH readings, along with fault indicators.
• Gumbi za upravljanje:
  • NASTAVITEV: Enters and confirms setting modes.
  • Puščice gor/dol: Adjust parameter values.
  • Gumb za vklop: Manual power on/off or reset.
• Terminali: Input (N, L) and Output terminals for wiring connections.
• DIN Rail Clip: For secure mounting on a 35mm DIN rail.

Figure 4.2: Dimensions of the GEYA GPS6-VAK protector (86mm height, 38mm width, 67.5mm depth) and illustration of 35mm DIN rail mounting. This image also shows the side view s terminali.

5. Specifikacije

Figure 5.1: Detailed specifications table for the GEYA GPS6-VAK series, including model number, rated voltage, frequency, and operational current.

6. Namestitev

6.1 Montaža

The GEYA GPS6-VAK protector is designed for 35mm DIN rail mounting. Ensure the DIN rail is securely fastened within an electrical enclosure or distribution box.

1. Align the device's mounting clip with the DIN rail.
2. Press the device firmly onto the rail until the clip engages and locks it in place.
3. Verify that the device is stable and does not wobble.

6.2 Shema ožičenja

Connect the device according to the following single-phase wiring diagram. Ensure all connections are tight and secure to prevent loose contacts and potential hazards.

Figure 6.1: Wiring diagram for the GEYA GPS6-VAK protector. The 'N' terminal connects to the neutral line, and the 'L' terminal connects to the live line. The output terminals connect to the load.

• Connect the incoming Neutral (N) wire to the 'N' input terminal.
• Connect the incoming Live (L) wire to the 'L' input terminal.
• Connect the outgoing Neutral wire to the 'N' output terminal (Load Neutral).
• Connect the outgoing Live wire to the 'L' output terminal (Load Live).
• Ensure that the wire gauge is appropriate for the maximum current rating (80A for this model).

7. Nastavitev in konfiguracija

The GPS6-VAK allows for adjustment of overvoltage, podzvtage, overcurrent, and reset time parameters. Refer to the digital display and control buttons for navigation and setting.

Figure 7.1: Comparison highlighting the adjustable voltage/current protector with KWH measuring features of the GPS6-VAK model, including rated supply voltage, frequency, and setting ranges.

7.1 Dostop do nastavitev

Pritisnite in držite NASTAVI button for a few seconds to enter the parameter setting mode. Use the Up in Dol arrow buttons to navigate through different parameters.

7.2 Prilagajanje parametrov

1. Once in setting mode, press NASTAVI to select a parameter (e.g., Overvoltage prag, Undervoltage threshold, Overcurrent threshold, Reset Time).
2. Uporabite Up in Dol puščične gumbe za nastavitev vrednosti.
3. Pritisnite NASTAVI again to confirm the value and move to the next parameter or exit the setting mode.
4. If no button is pressed for a certain period, the device may automatically exit the setting mode, saving the changes.

Privzete nastavitve:

• Overvoltage: 275 V.
• Undervoltage: 175 V.
• Reset Time: 30 seconds (Adjustable from 2 to 900 seconds)
• Overcurrent: Max operating current is 80A for this model. The overcurrent trip threshold can be set within the device's capabilities.

8. Delovanje

Once installed and configured, the GEYA GPS6-VAK operates automatically to protect your electrical system. The digital display provides continuous feedback on the system's status.

8.1 Prikazani podatki

• voltage (V): Displays the real-time line voltage.
• Tok (A): Displays the real-time load current. (Note: Current value may not be displayed if below 1A).
• KWH: Displays the cumulative Kilowatt-hour consumption. (Note: KWH may not be displayed if below 0.01).
• Kazalniki stanja: LEDs or symbols on the screen may indicate normal operation, overvoltage, podzvtage, overcurrent, or other fault conditions.

8.2 Protection and Recovery

When a fault condition (overvoltage, podzvtage, or overcurrent) is detected, the device will automatically cut off the power supply to the load to prevent damage. After the voltage or current returns to normal within the set parameters and the configured reset time has elapsed, the device will automatically restore power.

The power button can also be used for manual power on/off or to manually reset the device after a trip, if allowed by the current fault state.

9. Vzdrževanje

The GEYA GPS6-VAK protector requires minimal maintenance to ensure long-term reliable operation.

• Redni pregled: Periodically check the device for any visible signs of damage, loose connections, or discoloration.
• Čiščenje: Po potrebi zunanjost naprave nežno očistite s suho, mehko krpo. Ne uporabljajte abrazivnih čistil ali topil. Pred čiščenjem se prepričajte, da je napajanje izklopljeno.
• Okoljski pogoji: Ensure the operating environment is within the specified temperature and humidity ranges to prevent premature wear.

10. Odpravljanje težav

If the device is not functioning as expected, consider the following common issues and solutions:

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact GEYA customer support.

11. Garancija in podpora

GEYA products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official GEYA website. For technical support, product inquiries, or service, please contact GEYA customer service through their official channels.

Proizvajalec: GEYA

Država izvora: Kitajska