Fosmon Fosmon 3 Outlet + 3 Remote Control Combo

Fosmon Indoor Outdoor Remote Control Outlet Switch Combo Instruction Manual

Model: Fosmon 3 Outlet + 3 Remote Control Combo

Uvod

This manual provides detailed instructions for the safe and efficient use of your Fosmon Indoor Outdoor Remote Control Outlet Switch Combo. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Varnostne informacije

Za preprečitev poškodb ali škode na izdelku upoštevajte naslednje varnostne ukrepe:

  • Izdelka ne potapljajte v vodo ali druge tekočine.
  • Ensure the product is plugged into a GFCI (Ground Fault Circuit Interrupter) approved outlet when used outdoors.
  • When using outdoors, position the outlet hanging down to prevent moisture from entering the plug.
  • Do not exceed the maximum electrical ratings specified in this manual.
  • Hraniti izven dosega otrok.
  • Izdelka ne razstavljajte ali spreminjajte.
ETL Listed Mark on the back of the remote control outlet
Image: ETL Listed Mark. This image displays the ETL Listed mark on the back of the remote control outlet, indicating compliance with safety guidelines.
Weather-resistant remote control outlet with water droplets
Image: Weather-Resistant Design. The image shows the remote control outlet with water droplets, highlighting its weather-resistant cord and casing suitable for outdoor use.

Vsebina paketa

Preverite, ali so v paketu vsi elementi:

  • 3x Remote Control Outlet Receivers
  • 3x oddajnika za daljinsko upravljanje
  • 3x CR2032 Batteries (pre-installed in remotes)

Lastnosti izdelka

  • Wireless remote control for indoor and outdoor lighting and appliances.
  • Weather-resistant construction for outdoor applications.
  • Grounded 3-prong AC plug for standard outlets.
  • Pair and un-pair functionality for customizable control.
  • Operating range of up to 30 meters (98.4 feet) in open areas.
  • Compact remote design.
Compact remote control with dimensions 3.2in / 81mm length, 1.5in / 37mm width, 0.7in / 17mm thickness
Image: Compact Remote Dimensions. This image illustrates the compact size of the remote control, showing its dimensions: 3.2 inches (81mm) in length, 1.5 inches (37mm) in width, and 0.7 inches (17mm) in thickness.

Specifikacije

Max Range (Open Area)30 metrov / 98.4 čevljev
Oddaljena baterijaCR2032 (vključen)
Uporaba okoljaZunanji in notranji
Vrsta izhodaSingle 125VAC outlet
Maks. Tok15 A maks
Električne ocene125VAC, 60HZ, 15A (Resistive, General purpose)
125VAC, 60HZ, 10A / 1250W (Tungsten)
125VAC, 60HZ, 1/2HP TV-5
Pogostost433.92MHz
Delovna temperatura-13°F~104°F / -25°C~40°C
CertifikatiETL na seznamu

Navodila za namestitev

Začetno seznanjanje

The remote control outlets and remotes are pre-paired from the factory. If re-pairing is needed or if you wish to customize your control setup, follow these steps:

  1. Plug the remote control outlet receiver into an electrical wall outlet. The indicator light on the receiver will turn on.
  2. Within 29 seconds of plugging in the receiver, press the ON or OFF button on the desired remote control transmitter.
  3. The indicator light on the receiver will blink once to confirm successful pairing.

Note: Multiple outlets (receivers) can be paired to one remote, and multiple remotes can be paired to one outlet.

Diagram showing pairing process: plug in outlet, press remote button within 29 seconds
Image: Advanced Pair/Unpair Technology. This diagram illustrates the pairing process: 1) Plug the remote outlet into an electrical outlet. 2) Press the remote button within 29 seconds to establish a connection.

Preklic seznanitve

To unpair a remote from an outlet:

  1. Unplug the remote control outlet receiver from the wall outlet.
  2. Press and hold the ON button on the remote control transmitter.
  3. While still holding the ON button, plug the remote control outlet receiver back into the wall outlet.
  4. Continue holding the ON button for approximately 5 seconds until the indicator light on the receiver blinks rapidly, then release. This indicates successful unpairing.

Premisleki glede namestitve

  • Uporaba v zaprtih prostorih: Plug the remote control outlet into any standard 3-prong wall outlet.
  • Zunanja uporaba:
    • Always plug into a GFCI approved outlet.
    • Hang the outlet with the plug facing downwards to prevent water entry.
    • Ensure the connected appliance is also suitable for outdoor use.
Diagram showing various Fosmon remote control outlets and switches that can be paired
Image: Expandable and Customizable System. This image demonstrates how the remote control outlets can be expanded and customized by pairing with other Fosmon indoor and outdoor remote control outlets and switches (sold separately).
Outdoor remote control outlet plugged into a wall outlet with plants around it
Image: Outdoor Installation Example. The image shows a remote control outlet installed outdoors, plugged into a wall outlet, with plants in the foreground, illustrating a typical outdoor setup.

Navodila za uporabo

Once the remote control outlet is plugged in and paired with its remote, operation is straightforward:

  • Pritisnite ON button on the remote control transmitter to turn on the connected appliance or light.
  • Pritisnite IZKLOP button on the remote control transmitter to turn off the connected appliance or light.

The remote can control the outlet from a distance of up to 30 meters (98.4 feet) in open areas, allowing for convenient control of hard-to-reach outlets or outdoor lighting from indoors or a vehicle.

Hand holding a single-button remote control, with a Christmas tree visible through a window in the background
Image: Single Button Remote Operation. This image shows a hand holding the remote control, demonstrating its single-button operation to turn on lighting from a distance of 30m (98.4ft), with a Christmas tree visible through a window.

Vzdrževanje

Čiščenje

To clean the remote control outlet or transmitter, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.

Zamenjava baterije (daljinski upravljalnik)

The remote control uses a CR2032 battery. If the remote's range decreases or it stops responding, the battery may need replacement.

  1. Poiščite predal za baterije na zadnji strani daljinskega upravljalnika.
  2. Za odpiranje predala uporabite majhen izvijač ali kovanec.
  3. Odstranite staro baterijo CR2032.
  4. Vstavite novo baterijo CR2032 s pozitivno stranjo (+) obrnjeno navzgor.
  5. Varno zaprite predal za baterije.

Odpravljanje težav

TežavaMožen vzrokrešitev
Outlet does not respond to remote.
  • Outlet not plugged in.
  • Baterija daljinskega upravljalnika je prazna.
  • Outlet and remote are not paired.
  • Izven dosega.
  • motnje.
  • Ensure outlet is securely plugged into a live electrical socket.
  • Zamenjajte baterijo CR2032 v daljinskem upravljalniku.
  • Follow the "Initial Pairing" steps to re-pair the remote and outlet.
  • Premaknite se bližje vtičnici.
  • Relocate the outlet or remote to minimize interference from other wireless devices.
Outlet indicator light does not turn on.
  • Vtičnica ni elektrike.
  • Izhod je pokvarjen.
  • Check the wall outlet with another appliance. Check circuit breaker.
  • Contact customer support if the outlet remains unresponsive after checking power.
Reduced remote range.
  • Prazna baterija daljinskega upravljalnika.
  • Obstructions or interference.
  • Zamenjajte baterijo CR2032.
  • Ensure a clear line of sight between the remote and the outlet, or reduce the distance.

Garancija in podpora

This Fosmon product includes a limited lifetime warranty. For more details regarding the warranty policy or for technical support, please visit the official Fosmon webali se obrnite na njihov oddelek za pomoč uporabnikom.

Fosmon Webspletno mesto: www.fosmon.com

Storitev za stranke: Refer to the Fosmon webspletno mesto za kontaktne podatke.

© 2023 Fosmon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.