1. Uvod
Thank you for choosing the HUANUO Gas Spring Monitor Arm, model HNSS31B. This monitor arm is designed to enhance your workspace by providing flexible and ergonomic positioning for your monitor. Please read this manual carefully before installation and use to ensure proper setup and safe operation. Keep this manual for future reference.
Image 1.1: HUANUO Gas Spring Monitor Arm supporting a monitor on a desk.
2. Varnostne informacije
OPOZORILO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Ne prekoračite največje dovoljene teže 9 kg (19.8 lbs).
- Ta izdelek je namenjen samo za uporabo v zaprtih prostorih.
- Ensure the mounting surface (desk) can safely support the combined weight of the monitor arm and your monitor.
- Do not overtighten screws. Overtightening can cause damage to the product or your desk.
- Majhne dele hranite izven dosega otrok.
- Always use an assistant for heavy lifting or during installation steps that require extra support.
3. Vsebina paketa
Please verify that all parts are present and undamaged before installation. Refer to the packaging for a detailed list of components and hardware included with your monitor arm.
4. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | HNSS31B |
| Compatible Monitor Size | 13 - 32 palcev |
| Zmogljivost teže | 2–9 kg (4.4–19.8 lbs) |
| Združljivost VESA | 75x75 mm, 100x100 mm |
| Največja nastavitev višine | 410 mm (16.1 palcev) |
| Največja razširitev | 530 mm (20.9 palcev) |
| Razpon nagiba | +85° / -30° |
| Vrtljiv domet | ±90° |
| Vrtenje | 360° (od pokončnega do ležečega) |
| Možnosti namestitve | C-Clamp, Osnova z ušesom |
| Compatible Desk Thickness (C-Clamp) | 10–90 mm (0.4–3.5 palca) |
| Teža izdelka | 2.4 kg (5.3 lbs) |
| barva | Črna |
Image 4.1: Monitor size and weight compatibility.
5. Navodila za nastavitev
5.1. Izberite način montaže
The monitor arm supports two installation methods: C-Clamp and Grommet Base. Select the method suitable for your desk.
Slika 5.1: C-Clamp in možnosti montaže Grommet.
5.2. Namestite namizni nosilec
C-Clamp Namestitev:
- Pritrdite C-clamp to the base of the monitor arm.
- Postavite C-clamp on the edge of your desk. Ensure the desk thickness is between 10-90 mm.
- Zategnite clamp Privijte vijak, dokler podstavek ni varno pritrjen na mizo. Ne privijte premočno.
Montaža podnožja:
- Če ima vaša miza luknjo za tesnilo, vstavite podstavek tesnila skozi luknjo.
- Podstavek pritrdite s spodnje strani mize s priloženo ploščo in matico.
- Tighten the nut until the base is stable.
5.3. Attach the Monitor to the VESA Plate
This monitor arm supports VESA patterns of 75x75 mm in 100x100 mm.
Image 5.2: VESA compatibility for monitor mounting.
- Carefully attach the VESA plate from the monitor arm to the back of your monitor using the appropriate screws. Ensure the screws are tightened securely.
- If your monitor does not have VESA holes, a VESA adapter (sold separately) may be used.
Image 5.3: Using a VESA adapter for non-VESA monitors.
5.4. Mount the Monitor to the Arm
- With the VESA plate attached to your monitor, slide the monitor onto the arm's mounting head.
- Secure the monitor by tightening any quick-release screws or clips on the mounting head.
5.5. Prilagodite napetost vzmeti plina
The gas spring tension needs to be adjusted to match the weight of your monitor. This ensures the arm holds the monitor securely at any height.
- If the monitor drops after being mounted, turn the adjustment screw (usually located on the arm joint) v smeri urinega kazalca to increase tension.
- If the monitor floats up or is difficult to push down, turn the adjustment screw v nasprotni smeri urnega kazalca to decrease tension.
- Adjust until the monitor stays in place when moved to different heights.
6. Navodila za uporabo
The HUANUO Gas Spring Monitor Arm offers a wide range of adjustments to achieve an ergonomic viewizkušnje.
Image 6.1: Full range of motion and adjustment capabilities.
- Nastavitev višine: Gently push or pull the monitor up or down to your desired height. The gas spring mechanism will hold it in place once released. The maximum height is 410 mm.
- Nastavitev nagiba: Tilt the monitor screen up or down to reduce glare and find your optimal viewing angle. The tilt range is +85° do -30°.
- Nastavitev vrtenja: Swivel the monitor left or right to share your screen with colleagues or adjust your viewing position. The swivel range is ±90°.
- Vrtenje: Zasukajte monitor 360° to switch between landscape and portrait orientations.
- Podaljšanje/umikanje: Extend or retract the arm to adjust the distance of the monitor from your eyes. The maximum extension is 530 mm.
6.1. Ergonomic Benefits
Proper monitor positioning can significantly reduce neck and eye strain, promoting a more comfortable and productive work environment. Adjust your monitor so that the top of the screen is at or slightly below eye level, and your eyes are approximately 50-100 cm (20-40 inches) from the screen. Maintain a slight downward gaze (15-20 degrees) for optimal comfort.
Image 6.2: Achieving an ergonomic viewvhodni kot.
7. Vzdrževanje
- Čiščenje: Obrišite roko monitorja z mehko krpoamp krpo. Izogibajte se uporabi abrazivnih čistil ali topil, ki bi lahko poškodovala površino.
- Periodični pregledi: Občasno preverite vse vijake in povezave, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
- Nastavitev plinske vzmeti: If the monitor arm's movement becomes too loose or too stiff over time, re-adjust the gas spring tension as described in Section 5.5.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Roka monitorja se povesi ali ne ostane pokonci. | Napetost plinske vzmeti je prenizka glede na težo monitorja. | Povečajte napetost plinske vzmeti z vrtenjem nastavitvenega vijaka v smeri urinega kazalca (glejte poglavje 5.5). |
| Monitor arm floats up or is difficult to push down. | Napetost plinske vzmeti je previsoka glede na težo monitorja. | Zmanjšajte napetost plinske vzmeti tako, da nastavitveni vijak zavrtite v nasprotni smeri urinega kazalca (glejte poglavje 5.5). |
| Monitor is wobbly or unstable. | Mounting screws are loose or desk clamp/grommet is not secure. | Check and tighten all screws, including those attaching the monitor to the VESA plate and the arm to the desk. |
| Arm joints are too stiff or too loose. | Joint screws need adjustment. | Use the provided Allen key to adjust the tightness of the joint screws as needed. |
9. Garancija in podpora
The HUANUO Gas Spring Monitor Arm HNSS31B comes with a 5-letna garancija, demonstrating our commitment to quality and durability. This product has undergone rigorous testing, clearing 20,000 operation cycles to ensure long-lasting performance.
Image 9.1: Durability testing of the monitor arm.
For warranty claims, technical assistance, or any questions regarding your product, please contact HUANUO customer support through the retailer where you purchased the product or visit the official HUANUO webspletno mesto za kontaktne podatke.
