1. Pomembna varnostna navodila
Please read all instructions carefully before using the Morpilot Milk Frother HS010-S. Retain this manual for future reference.
- Osnovne enote ne potapljajte v vodo ali druge tekočine.
- Prepričajte se, da je napajalnik voltage matches the rating label on the frother.
- Ne uporabljajte naprave s poškodovanim kablom ali vtičem.
- Hraniti izven dosega otrok.
- Use only the frother jug and whisk attachments provided with the unit.
- Izogibajte se stiku z gibljivimi deli.
- Do not fill above the maximum fill line indicated inside the jug.
- Always ensure the frother jug is properly seated on the base before operation.
2. Izdelek je končanview
The Morpilot Stainless Steel Milk Frother HS010-S is designed to create hot or cold milk foam for various beverages. It features a stainless steel jug and an induction heating base.
Slika 1: Morpilot Stainless Steel Milk Frother HS010-S. This image displays the complete milk frother unit, including the black base with control buttons, the stainless steel jug with a handle, two whisk attachments (one for frothing, one for heating), and a small cleaning brush. A cup of frothed coffee and coffee beans are also visible in the foreground.
Sestavine:
- Induction Base: Vsebuje grelni element in nadzorno ploščo.
- Vrč iz nerjavečega jekla: Removable jug for milk, with a handle and pour spout.
- Metlica za penjenje: Used for creating thick foam.
- Mešalnik za segrevanje: Used for heating milk with minimal foam.
- Čopič za čiščenje: For maintaining the frother.
3. Nastavitev
- Razpakiraj: Previdno odstranite vse komponente iz embalaže.
- Čisto: Before first use, wash the stainless steel jug and whisk attachments with warm soapy water. Rinse thoroughly and dry. Wipe the exterior of the induction base with a damp krpo. Podstavka ne potapljajte v vodo.
- Umestitev: Place the induction base on a stable, flat, heat-resistant surface.
- Napajalni priključek: Priključite napajalni kabel v ozemljeno električno vtičnico.
4. Navodila za uporabo
4.1 Choosing the Whisk
- For Frothing (Hot or Cold): Use the frothing whisk (with the spring coil).
- For Heating Milk (Minimal Foam): Use the heating whisk (flat whisk).
Insert the desired whisk onto the pin at the bottom of the jug before adding milk.
4.2 Dodajanje mleka
- Pour fresh, cold milk into the jug.
- Observe the internal fill lines:
- MAX FROTH: Do not exceed this line when frothing milk (approx. 150ml).
- MAX HEAT: Do not exceed this line when only heating milk (approx. 300ml).
- MIN: Always fill at least to the minimum line (approx. 75ml).
Using whole milk (3.5% fat) typically yields the best frothing results.
4.3 Izbira programa
Place the jug onto the induction base. The control panel on the base features several illuminated icons. Press the power button (⏻) to activate the frother, then select your desired function:
- Hot Dense Foam: Pritisnite gumb z cup with three wavy lines icon. Ideal for cappuccinos.
- Hot Airy Foam: Pritisnite gumb z cup with two wavy lines icon. Suitable for lattes.
- Vroče mleko (brez pene): Pritisnite gumb z solid cup icon. Use the heating whisk for best results.
- Hladna pena: Pritisnite gumb z ikona snežinke. The milk will be frothed without heating.
The selected program's indicator light will illuminate. The frother will automatically stop when the program is complete.
4.4 After Frothing
- Carefully remove the jug from the base.
- Pour the frothed milk into your beverage.
- Clean the jug and whisk immediately after use to prevent milk residue from drying.
5. Čiščenje in vzdrževanje
Regular cleaning ensures optimal performance and extends the life of your frother.
- Odklopite: Pred čiščenjem vedno izključite penilnik iz električne vtičnice.
- Ohlajanje: Allow the frother to cool completely before cleaning.
- Jug and Whisk: Remove the whisk from the jug. Wash the stainless steel jug and whisk attachments with warm soapy water using a soft sponge or the provided cleaning brush. Rinse thoroughly and dry immediately. The jug and whisks are dishwasher safe (top rack only).
- Osnovna enota: Wipe the exterior of the induction base with a soft, damp cloth. Do not use abrasive cleaners or scourers. Never immerse the base unit in water or any other liquid.
- Shranjevanje: Ko penilnika ne uporabljate, ga shranite na čistem in suhem mestu.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Frother se ne vklopi. | Not plugged in; power outlet not working; frother not properly seated on base. | Check power connection; try a different outlet; ensure jug is correctly placed on the base. |
| Mleko se ne peni ali segreva pravilno. | Incorrect whisk used; milk level too high/low; milk type unsuitable; whisk not properly attached. | Ensure correct whisk is used for desired function; check milk fill lines; use fresh, cold whole milk; ensure whisk is securely attached to the pin. |
| Vonj po zažganem ali mleko, ki se prime dna. | Milk residue from previous use; jug not clean. | Clean the jug thoroughly after each use. Do not exceed MAX fill lines. |
| Penilnik se nepričakovano ustavi. | Aktivirana je zaščita pred pregrevanjem. | Unplug the unit and allow it to cool down for at least 10 minutes before reuse. |
7. Specifikacije
- Model: HS010-S
- Znamka: Morpilot
- Material: Nerjaveče jeklo
- Dimenzije: 20.5 x 14.5 x 14.5 cm (približne dimenzije embalaže)
- Teža: 950 g (approximate item weight)
- UPC: 810206591185
- Max Frothing Capacity: 150 ml
- Max Heating Capacity: 300 ml
8. Garancija in podpora
Morpilot provides a standard manufacturer's warranty for this product. For detailed warranty information, product support, or to report any issues, please contact Morpilot customer service through their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen.
Please have your model number (HS010-S) and proof of purchase ready when contacting support.
Webspletno mesto: www.morpilot.com