Uvod
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Pomembne varnostne informacije
- Nevarnost električnega udara: Always disconnect power before installing or replacing the bulb.
- Notranja/zunanja uporaba: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- voltage: Zagotovite, da je volumen svetilketage is 120V. Do not use with incompatible voltage.
- Zatemnitev: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Temperatura: Do not operate outside the specified temperature range of -20°C to +45°C.
- Ravnanje: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Odstranjevanje: Dispose of LED bulbs according to local regulations.
Nastavitev in namestitev
- Ugasniti: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Odstranite staro žarnico: Previdno odvijte obstoječo žarnico iz svetilke.
- Vstavite novo žarnico: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Vklop: Obnovite napajanje naprave.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Delovanje
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Nadzor svetlosti: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Kakovost svetlobe: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Širina žarka: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Vzdrževanje
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Čiščenje: Za čiščenje žarnice se prepričajte, da je napajanje izklopljeno in da je žarnica hladna. Nežno obrišite z mehko, suho krpo. Ne uporabljajte tekočih čistil ali abrazivnih materialov.
- Zamenjava: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Odpravljanje težav
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Žarnica ne sveti:
- Prepričajte se, da je napajanje svetilke vklopljeno.
- Preverite, ali je žarnica varno privita.
- Preizkusite žarnico v drugi delujoči svetilki, da se prepričate, da ni okvarjena.
- Verify the fixture itself is operational.
- Utripajoča ali neenakomerna svetloba:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Zagotovite voltage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | S12535 |
| Wattage | 5 W (ekvivalent žarilne moči 40 W) |
| Svetlost | 425 lumnov |
| Barvna temperatura | 5000K (naravna bela) |
| Oblika žarnice | ST19 |
| Osnovna vrsta | E26 Srednja osnova |
| Indeks barvnega upodabljanja (CRI) | 92 |
| Kot snopa | 300 stopinj |
| voltage | 120 V |
| Možnost zatemnitve | Yes (with compatible 120V dimmers) |
| Ocenjeno življenje | 15,000 ur |
| Okoljska ocena | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Delovna temperatura | -20°C do +45°C |
| Certifikati | cULus, FCC, RoHS |
| Faktor moči | 0.7 |
| Pogostost | 60Hz |
| Teža artikla (paket s 6 kosi) | 1.06 funta |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Garancija in podpora
The Satco S12535 ST19 LED Light Bulb is backed by a 2-letna garancija proizvajalca od datuma nakupa.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webspletno mesto za trenutne kontaktne podatke.
Webspletno mesto: www.satco.com