Uvod
Thank you for choosing the Baseus VC2 Flex Pro 15W Wireless Car Charger. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual carefully before use to ensure optimal performance and safety.
Konec izdelkaview
Kaj je v škatli
- Baseus VC2 Flex Pro Wireless Car Charger (Powerbank * 1)
- USB-C Charging Cable (Cable * 1)
- Magnetic Ring (for non-MagSafe devices)
- Alkoholni robček
Ključne značilnosti
- 15 W hitro brezžično polnjenje: Provides stable and efficient power delivery, supporting PD, QC 2.0, and QC 3.0 fast charging protocols.
- 720° Total Flexibility: Enjoy 3-axis viewing freedom with 180° rotation at two joints and 360° rotation at the base for the perfect angle.
- Vacuum Lock Stability: Premium vacuum technology and washable gel base provide strong adhesion, holding up to 54 kg (119 lb) without wobbling.
- 35N Max Magnetic Hold: High-strength N52 magnetic ring ensures a precise 1:1 magnetic fit for iPhone 12-17 series and later.
- Reusable and Residue-Free: The non-toxic, washable gel base is designed for long-term use and leaves no residue.
- Kompakten in prenosen: Folds easily for transport, suitable for use in cars, offices, kitchens, and more.
Nastavitev in namestitev
Namestitev polnilnika
- Choose a smooth surface with a diameter of at least 7.5 cm (3 inches). Clean the surface thoroughly with the included alcohol wipe and allow it to dry.
- Remove the protective film from the suction cup base. Press the holder firmly against the chosen surface.
- Rotate the base clockwise until the vacuum lock engages and the suction cup is securely fixed.
- Adjust the magnetic charging panel to your desired angle and place your phone on it for use.
Image: Easy Installation Steps
The vacuum lock base is compatible with various surfaces including leather, artificial leather, rough surfaces, glass, and plastic. Avoid installation on vibrating surfaces or those with pronounced curves.
Image: Compatible Installation Surfaces
Magnetic Ring Installation (for non-MagSafe devices)
For older iPhone models (iPhone 11 and earlier) and Android devices, use the included magnetic ring to achieve optimal magnetic hold and wireless charging.
- Clean the back of your phone or phone case with an alcohol wipe.
- Use the positioning card (included) to accurately align the magnetic ring on your device.
- Ensure full contact when applying the ring.
- Wait 12 hours before using the device with the charger to ensure strong adhesion.
Image: Magnetic Ring Installation Guide and Compatibility
Navodila za uporabo
Polnjenje vaše naprave
Connect the Baseus VC2 Flex Pro to a power source using the provided USB-C cable. The charger supports 15W wireless fast charging. Simply place your compatible smartphone onto the magnetic charging panel. Ensure your phone is properly aligned for efficient charging. The charger also features two built-in cable ports for additional wired charging if needed.
Image: 15W Wireless Charging Feature
Prilagajanje Viewkota
The Baseus VC2 Flex Pro offers 720° of total flexibility. You can pull, flex, and rotate the device to achieve the perfect viewing angle. The design includes 180° rotation at two joints and 360° rotation at the base, allowing for optimal visibility and comfort in various settings.
Image: 720° Flexibility for Optimal Viewing
Vzdrževanje
Cleaning the Suction Cup
The gel base of the Baseus VC2 Flex Pro is designed to be reusable. If the adhesion weakens due to dust or dirt, simply rinse the gel base with water and let it air dry. Do not use harsh chemicals or abrasive materials, as this may damage the gel. Once dry, the suction cup will regain its strong adhesive properties.
Odstranjevanje polnilnika
To remove the charger from a surface, rotate the base counter-clockwise until the white point aligns with the unlock icon. Then, gently lift the tab to release the vacuum seal and detach the charger.
Image: Easy Removal Steps
Odpravljanje težav
- Naprava se ne polni: Ensure the USB-C cable is securely connected to both the charger and a power source. Verify that your phone is properly aligned on the magnetic charging panel. Check if your phone supports wireless charging or if the magnetic ring is correctly installed for non-MagSafe devices.
- Weak magnetic hold: For non-MagSafe phones, ensure the magnetic ring is correctly installed and has had 12 hours to adhere. Ensure there are no thick cases or obstructions between the phone and the charger.
- Charger not sticking to surface: Clean the installation surface and the gel base of the suction cup. Rinse the gel base with water if it's dirty and let it air dry. Ensure the vacuum lock is fully engaged by rotating the base clockwise.
- Počasno polnjenje: Ensure your power adapter supports fast charging protocols (PD, QC 2.0, QC 3.0) and provides sufficient power output.
Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Ime modela | VC2 Flex Pro |
| Izhod za brezžično polnjenje | 15W Najv |
| Magnetic Hold Strength | 35N Max |
| Vacuum Lock Capacity | Do 54 kg (119 lb) |
| Prilagodljivost | 720° (3-axis: 2x 180° rotation, 1x 360° rotation) |
| Material | Kovina |
| barva | Črna |
| Združljive naprave | Smartphones (iPhone 12-17 series directly, iPhone 11 and older/Android with magnetic ring) |
| Vrsta namestitve | Dashboard (Vacuum Suction Cup) |
| Dimenzije izdelka | 14.2 x 8.6 x 5.3 cm (Package); Refer to diagram for device dimensions. |
| Teža | 220 g (pakiranje) |
| UPC | 810196182783 |
Slika: Dimenzije izdelka
Garancija in podpora
Informacije o garanciji
The Baseus VC2 Flex Pro comes with a 24-mesečna garancija. Additionally, Baseus offers a 45-dnevna garancija vračila denarja in doživljenjska storitev za strankeProsimo, shranite dokazilo o nakupu za uveljavljanje garancije.
Podpora uporabnikom
For any questions, concerns, or technical assistance, please contact Baseus customer support through the retailer where you purchased the product or visit the official Baseus webspletno mesto za kontaktne podatke.