mijashy Electric Bidet Toilet Seat Model Y101 User Manual

1. Pomembne varnostne informacije

Please read all instructions carefully before installation and use. Retain this manual for future reference. Failure to follow these instructions could result in electric shock, fire, or other injuries.

• Električna varnost: This product must be connected to a properly grounded outlet. Do not use with extension cords. Ensure the power outlet is protected by a Ground Fault Circuit Interrupter (GFCI).
• Varnost vode: Do not immerse the product in water. Ensure all water connections are secure to prevent leaks. Turn off the water supply before performing any maintenance.
• Otroci in osebe z omejenimi zmožnostmi: Supervise children to ensure they do not play with the appliance. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Čiščenje: Disconnect power before cleaning. Use only mild, non-abrasive cleaners.

2. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1x mijashy Electric Bidet Toilet Seat
• 1x brezžični daljinski upravljalnik
• 1x Navodila za uporabo
• 1x montažna plošča
• 2x vijaki
• 2x Steel Discs
• 2x Anchoring Rubber
• 1x Three-Way Valve (7/8" to 1/2" to 7/8")
• 1x PE Pipe (Water Hose)

Slika 2.1: Vključene komponente

3. Nastavitev in namestitev

This bidet toilet seat is designed for easy DIY installation. Ensure you have a standard electrical outlet (GFCI protected) and access to your toilet's water supply line.

3.1 Preverjanje združljivosti

This model is designed for elongated toilets. Please measure your toilet bowl to ensure compatibility. The distance from the toilet seat mounting holes to the front edge of the bowl should be approximately 18" - 19.5".

Figure 3.1: Elongated Toilet Compatibility

3.2 koraki namestitve

1. Remove Current Toilet Seat: Lift the hinge covers and unscrew the bolts holding your existing toilet seat in place. Remove the seat and lid.
2. Namestite montažno ploščo: Place the mounting plate over the toilet bowl holes. Insert the screws through the steel discs and anchoring rubber, then tighten them to secure the mounting plate.
3. Slide Bidet Seat: Carefully slide the bidet toilet seat onto the mounting plate until it clicks into place. A quick-release button allows for easy removal if needed.
4. Priključitev T-ventila: Turn off the water supply to your toilet. Flush the toilet to drain the tank. Disconnect the existing water supply hose from the toilet tank's fill valve. Install the provided T-valve onto the fill valve.
5. Povežite cevi: Connect the original water supply hose to the bottom of the T-valve. Connect one end of the provided PE pipe (bidet hose) to the side of the T-valve and the other end to the water inlet on the bidet seat.
6. Obnovite vodo in elektriko: Slowly turn on the water supply. Check for leaks. Plug the bidet seat's power cord into a GFCI-protected electrical outlet.

Figure 3.2: Fast and Easy Installation Steps

4. Navodila za uporabo

The mijashy Electric Bidet Toilet Seat offers various functions controlled by the wireless remote. Ensure the remote has fresh batteries and is within range of the bidet seat.

4.1 Daljinski upravljalnikview

Figure 4.1: Wireless Remote Control Functions

4.2 Osnovne funkcije

• Pranje zadaj: Aktivira funkcijo zadnjega pranja.
• Bidet Wash (Front Wash): Aktivira funkcijo ženskega pranja.
• Ustavite: Stops any active wash or drying cycle.
• Sušenje: Aktivira sušilnik s toplim zrakom.
• moč: Vklopi ali izklopi enoto.

4.3 Nastavljive nastavitve

• Temperatura vode: Use the 'Water Temp' button to cycle through adjustable warm water temperature settings (e.g., Room Temperature, 93°F, 98°F, 104°F).
• Temperatura sedeža: Use the 'Seat Temp' button to adjust the heated seat temperature through multiple levels.
• Temperatura sušenja: Use the 'Drying Temp' button to adjust the warm air dryer temperature through multiple levels.
• Water Pressure (Strength+/-): Use 'Strength+' and 'Strength-' buttons to increase or decrease water pressure during a wash cycle.
• Nozzle Position (Forward/Backward): Adjust the nozzle position for optimal cleaning using the 'Forward' and 'Backward' buttons during a wash cycle.

4.4 naprednih funkcij

• Več načinov pranja: In addition to standard front and rear wash, the bidet offers Strong Wash, Pulsating Wash, Soft Wash, and Oscillating Wash for a comprehensive cleaning experience.
• Samodejni način: Initiates a pre-programmed wash and dry cycle.
• Otroški način: Provides a gentler wash and lower pressure suitable for children.
• LED nočna lučka: The built-in nightlight provides illumination for nighttime use. Activate or deactivate using the 'Lighting' button.
• Eko način: Reduces energy consumption by lowering water and seat temperatures when not in use.

Figure 4.2: Multiple Wash Modes and Water Temperature Settings

Figure 4.3: Heated Seat and Warm Air Dryer Controls

5. Vzdrževanje

Regular cleaning and maintenance ensure optimal performance and hygiene of your bidet toilet seat.

5.1 Čiščenje šob

The bidet features a self-cleaning nozzle function. Before and after each use, the nozzle automatically rinses itself with water. For a more thorough cleaning, activate the 'Self-Cleaning Nozzle' function on the remote control.

Figure 5.1: Self-Cleaning Nozzle Feature

5.2 Generalno čiščenje

• Odklop napajanja: Pred čiščenjem vedno izključite sedež bideja iz električne vtičnice.
• Zunanjost: Obrišite zunanje površine z mehko damp krpo in blagim, neabrazivnim čistilom. Izogibajte se agresivnim kemikalijam, abrazivnim gobicam ali topilom, saj lahko poškodujejo premaz.
• Sedež in pokrov: Clean the seat and lid with a soft cloth and mild soap. The soft-close lid can be gently lifted for cleaning underneath.
• Nozzle Tip: If necessary, gently clean the nozzle tip with a soft brush (like a toothbrush) and mild soap. Do not force or bend the nozzle.
• Filter: Periodically check the water inlet filter for debris. If clogged, turn off the water supply, disconnect the hose, clean the filter, and reassemble.

6. Odpravljanje težav

If you encounter issues with your mijashy Electric Bidet Toilet Seat, refer to the following common problems and solutions:

Če težava po poskusu teh rešitev še vedno obstaja, se obrnite na podporo strankam.

7. Specifikacije

Slika 7.1: Dimenzije izdelka

8. Garancija in podpora

For warranty information and customer support, please refer to the documentation included with your product or visit the official mijashy webspletnega mesta. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.