HIROBOT FHSM-520A Electric Sewing Machine User Manual

1. Uvod

Thank you for choosing the HIROBOT FHSM-520A Electric Sewing Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new sewing machine. Designed for both beginners and enthusiasts, this portable machine offers 16 built-in stitch patterns, adjustable speed, and a reverse sewing function, making it suitable for various home DIY projects and repairs. Please read this manual thoroughly before initial use to ensure optimal performance and longevity of your machine.

2. Varnostna navodila

To prevent accidents and ensure safe operation, please adhere to the following safety guidelines:

• Always unplug the machine from the power outlet when not in use, before cleaning, or when performing any maintenance.
• Keep the machine away from water or damp okoljih. Ne upravljajte z mokrimi rokami.
• Ensure the power cord is not damaged. Do not operate the machine if the cord or plug is damaged.
• Keep fingers away from the needle, handwheel, and other moving parts during operation.
• Supervise children closely if they are near the machine. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
• Uporabljajte samo napajalnik, ki je priložen napravi.
• Stroj med delovanjem postavite na stabilno, ravno površino.

3. Vsebina paketa

Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:

• HIROBOT FHSM-520A Electric Sewing Machine
• Nožni pedal
• Napajalni adapter
• Bobbini
• Niti
• Igle
• Various Presser Feet
• Uporabniški priročnik

This image displays the HIROBOT FHSM-520A Electric Sewing Machine along with its complete set of accessories, including the foot pedal, power adapter, bobbins, threads, needles, and various presser feet. The machine is white with mint green accents.

4. Izdelek je končanview

Seznanite se z glavnimi sestavnimi deli vašega šivalnega stroja:

• Gumb za izbiro šiva: Uporablja se za izbiro med 16 vgrajenimi vzorci šivov.
• Regulator napetosti niti: Prilagodi napetost zgornje niti.
• Gumb za vzvratni šiv: Engages reverse sewing for reinforcement.
• Stikalo hitrosti: Toggles between low and high sewing speeds.
• Ročno kolo: Ročno dvigne in spusti iglo.
• Dvigalo šivalne tačke: Dvigne in spusti šivalno tačko.
• Igla Clamp vijak: Iglo pritrdi na svoje mesto.
• Bobbin Winder Spindle: Used for winding thread onto bobbins.
• Foot Pedal Port: Priključi nožni pedal za nadzor hitrosti.
• Napajalni priključek: Povezuje napajalnik.

5. Nastavitev

5.1 Napajalni priključek

1. Prepričajte se, da je stikalo za vklop naprave v položaju »IZKLOP«.
2. Insert the power adapter plug into the power port on the machine.
3. Priključite adapter v ustrezno električno vtičnico.

5.2-palčni priključek za pedal

For foot-controlled operation, insert the foot pedal plug into the designated foot pedal port on the machine.

5.3 Navijanje vretenca

1. Na zatič za navijanje položite tuljavo niti.
2. Guide the thread through the bobbin winder tension disc.
3. Wind the thread a few times manually around an empty bobbin.
4. Namestite vreteno na vreteno navijalca vretenca in ga potisnite v desno.
5. Turn on the machine and gently press the foot pedal or use the hand switch to start winding. Stop when the bobbin is full.
6. Odrežite nit in odstranite vreteno.

5.4 Vdevanje niti v stroj

Correct threading is crucial for proper stitch formation. Please follow the threading instructions provided in the detailed diagram or video (if available) that came with your machine. Incorrect threading can lead to skipped stitches, thread breakage, or machine jams.

6. Navodila za uporabo

6.1 Izbira šiva

Your HIROBOT FHSM-520A machine features 16 built-in stitch patterns. Rotate the stitch selector dial to choose your desired stitch. The available stitches include straight, zigzag, blind hem, and various decorative patterns.

Note: Stitches 9, 10, 11, and 12 are specifically designed for buttonholes and cannot be used for regular sewing. For general and decorative sewing, select other stitch patterns.

A visual guide illustrating the 16 built-in stitch patterns of the HIROBOT FHSM-520A. These include straight stitches (1-4), decorative stitches (5-8), buttonhole stitches (9-12), and overlock stitches (13-16). Each stitch type is demonstrated on a fabric swatch.

6.2 Nastavitev napetosti niti

The upper thread tension needs to be adjusted according to the fabric type and thread thickness to achieve balanced stitches. Rotate the thread tension dial to increase or decrease tension. A balanced stitch will have both upper and bobbin threads meeting evenly between the fabric layers.

Splošna priporočila:

• Chiffon: Tension 2-3
• Pure Cotton: Tension 3-4
Linen: Tension 4-5
• Denim: Tension 4-5

These are reference suggestions; always test on a scrap piece of your fabric.

This image illustrates the adjustable upper thread tension dial, crucial for achieving smooth stitches on various fabric types. Recommended tension settings are provided for chiffon (2-3), pure cotton (3-4), linen (4-5), and denim (4-5), emphasizing that adjustments may be needed based on fabric density.

6.3 Reverse Sewing Function

To reinforce stitches at the beginning and end of a seam, use the reverse sewing function. Press and hold the reverse button to sew backward. Release the button to resume forward sewing. This function is typically available for straight stitches (1-4).

This image highlights the reverse sewing function, activated by pressing a button. It shows how the machine can sew backward for reinforcement, specifically for stitches 1-4. The design also includes a free arm for sewing sleeves and cuffs.

6.4 Nadzor hitrosti

Stroj ponuja dva načina za nadzor hitrosti šivanja:

• Stikalo hitrosti: Use the 'L' (Low) and 'H' (High) switch on the machine for a constant speed.
• Nožni pedal: For variable speed control, connect the foot pedal. Gentle pressure results in slower stitching, while firmer pressure increases the speed.

6.5 Združljivost tkanin

The HIROBOT FHSM-520A is designed to sew a variety of fabrics, from lightweight cotton to heavier denim. It can handle 4-6 layers of fabric with a total thickness of up to 2.5mm.

Supported Fabrics: Pure Cotton, Denim, Linen, Oxford, Mixed Yarn, Chemical Fiber, Modal, Corduroy.

Important: Avoid sewing excessively thin fabrics directly. If necessary, place a layer of A4 paper under the thin fabric to increase its thickness and prevent it from being pulled into the needle plate.

This image demonstrates the machine's capability to sew through 4-6 layers of fabric, up to a total thickness of 2.5mm. It also highlights the support for both 1-needle, 1-thread and 2-needle, 2-thread functions.

A collage of various fabric types that the HIROBOT FHSM-520A can sew, including Pure Cotton, Denim, Linen, Oxford, Mixed Yarn, Chemical Fiber, Modal, and Corduroy. A note advises against sewing overly thin fabrics without adding a layer of A4 paper for support.

7. Vzdrževanje

Regular maintenance ensures the smooth operation and extends the lifespan of your sewing machine.

• Čiščenje: Redno čistite vlakna in prah z območja vretenca in podajalnikov z majhno krtačko. Pred čiščenjem vedno izključite stroj iz električnega omrežja.
• Zamenjava igle: Replace needles frequently, especially when they become dull, bent, or if you notice skipped stitches. Use the correct needle type and size for your fabric.
• Shranjevanje: When not in use, store the machine in a dry, dust-free environment.

Ta slika ponuja notranji view of the sewing machine, showcasing its 'Solid & Scientific Structure'. Key components highlighted include the high-quality ABS housing, BIS Certified Adapter, 280S Motor, and the metal & ABS frame, indicating durable construction.

8. Odpravljanje težav

Če imate težave s šivalnim strojem, si oglejte naslednje pogoste težave in rešitve:

• Prekinitev niti: Check if the machine is threaded correctly (both upper and bobbin threads). Ensure the thread tension is not too high. Use good quality thread. Replace a bent or dull needle.
• Preskočeni šivi: This is often caused by an incorrect or dull needle. Ensure the needle is inserted correctly and replace it if necessary. Check upper threading and tension.
• Zatikanje stroja: Incorrect threading, especially of the bobbin, is a common cause. Remove all threads, clean the bobbin area, and re-thread carefully following the instructions. Ensure the fabric is not too thick for the machine.
• Neenakomerni šivi: Adjust the upper thread tension. Ensure the bobbin is wound evenly.
• Stroj se ne zažene: Check if the power adapter is securely plugged in and the power switch is 'ON'. Ensure the foot pedal is connected correctly if using it.

For persistent issues, please refer to the contact information in the 'Warranty and Support' section.

9. Specifikacije

An image displaying the physical dimensions of the HIROBOT FHSM-520A sewing machine. The measurements are 27.4 cm (10.79 inches) in width, 23.75 cm (9.35 inches) in height, and 11.55 cm (4.55 inches) in depth.

10. Garancija in podpora

For warranty information, technical support, or service inquiries, please contact the manufacturer or importer directly. Keep your purchase receipt as proof of purchase.

• Proizvajalec: Guangzhou Hengguan Mechanical & Electrical Co., Ltd
• Uvoznik: CHD TECH Pvt Ltd.
• telefon: +91 8793566784
• E-pošta: amzfkt@gmail.com