Uvod
The VANPO 1/2-Inch Digital Torque Wrench provides precise torque control for various mechanical applications. This manual outlines the proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
Ključne značilnosti:
- Precise Accuracy: Delivers reliable torque control with ±2% accuracy, reducing over-tightening and fastener damage.
- Clear Torque Feedback: Features a large backlit LCD display, audible alerts, LED indicators, and vibration feedback for clear confirmation when preset torque is reached.
- Durable & Bidirectional: Built for repeated use in automotive environments, supporting both clockwise and counterclockwise operation.
- Easy & Efficient Operation: Supports Peak and Track modes, with preset torque values, and a tool-free, quick-access battery compartment.
- Široka uporaba: Suitable for vehicle maintenance, home repair, workshop projects, and industrial machinery.
Nastavitev
1. Namestitev baterije
The torque wrench requires two AA batteries (included). To install:
- Unscrew the battery cap at the end of the handle.
- Insert two AA batteries, ensuring correct polarity (negative side down, positive side up).
- Replace the battery cap and tighten securely.
Figure 1: Battery installation and ergonomic handle design.
2. Pritrditev dodatne opreme
The wrench comes with a 125mm extension bar and a 1/2" to 3/8" adapter.
- To attach an extension or adapter, press the quick-release button on the ratchet head and insert the accessory.
- Ensure the accessory is securely locked in place before use.
Figure 2: Quick-release button for attaching sockets and accessories.
Navodila za uporabo
1. Power On/Off and Unit Selection
- Pritisnite VKLOP/IZKLOP button to power on the wrench.
- Pritisnite ZDA button to cycle through measurement units: ft-lb, in-lb, Nm, kg-cm.
Figure 3: LCD display showing selectable measurement units.
2. Setting Target Torque Value
- Uporabite Up in Dol puščičnimi gumbi nastavite ciljno vrednost navora.
- The LCD will display the current setting.
3. Operating Modes (Peak & Track)
Pritisnite P / T button to switch between Peak and Track modes.
- Način sledenja: Prikazuje vrednosti navora v realnem času, ko se uporablja sila.
- Vrhunski način: Captures and displays the maximum torque value achieved during the tightening process.
Figure 4: Explanation of Track Mode and Peak Mode.
4. Uporaba navora
Apply force to the wrench. As you approach the preset torque value, the wrench will provide triple feedback:
- Zvočno opozorilo: A buzzer will sound.
- LED indikatorji: Lights on the handle will illuminate (green for 85-90% of target, red for 100%).
- Vibracijske povratne informacije: The handle will vibrate.
Figure 5: Triple feedback system for reaching target torque.
5. Funkcija pomnilnika
The wrench can store multiple preset torque values. Use the M button to access and save memory settings.
6. Screen Lock Function
Dolgo pritisnite M button for 3 seconds to lock the screen and buttons, preventing accidental changes during operation. Long press M again to unlock.
Vzdrževanje
- Čiščenje: Po vsaki uporabi ključ obrišite s čisto, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Shranjevanje: Store the torque wrench in its protective case in a dry, cool place away from direct sunlight and extreme temperatures.
- Zamenjava baterije: Baterije zamenjajte, ko se na LCD-zaslonu prikaže indikator nizke temperature baterije.
- Umerjanje: For optimal accuracy, it is recommended to have the torque wrench calibrated periodically by a certified service center.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Ključ se ne vklopi. | Prazne ali nepravilno vstavljene baterije. | Preverite polarnost baterij ali jih zamenjajte z novimi baterijami AA. |
| Netočne meritve navora. | Ključ je treba kalibrirati ali pa se uporablja nepravilno. | Ensure proper technique. Consider professional recalibration. |
| No audible/vibration feedback. | Feedback settings disabled or malfunction. | Check user manual for enabling feedback. Contact support if issue persists. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | VP18-340-01 |
| Velikost pogona | 1/2-palčni |
| Območje navora | 12.5–250.8 ft-lb / 17–340 Nm |
| Natančnost | ±2 % |
| Merske enote | ft-lb, in-lb, Nm, kg-cm |
| Povratne informacije | Audible, LED, Vibration |
| Načini delovanja | Vrh, sled |
| Vir napajanja | 2 AA baterij (priložene) |
| Material | 40 CR, Chrome Molybdenum Steel, Chrome Vanadium Steel |
| Teža predmeta | 5.29 funtov |
| Vključene komponente | 1* digital torque wrench, 1*1/2 to 3/8" Adapter, 1*1/2'' 125mm Extension Bar |
Garancija in podpora
This VANPO Digital Torque Wrench is backed by a 36-month manufacturer warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official VANPO webmesto.
A Certificate of Calibration Report is included with your product, detailing the device's accuracy at the time of manufacture.
Video posnetki izdelkov
Ključne značilnosti Konecview
Video: Prekoračitevview of the key features and functionalities of the VANPO Digital Torque Wrench.
Detailed Features Demonstration
Video: A demonstration of the various features of the VANPO Digital Torque Wrench, including display and controls.