ATOMSTACK P1 5W Laser Engraver Instruction Manual

1. Uvod

The ATOMSTACK P1 is a portable 5W diode laser engraver and cutter designed for precision work on various materials. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting.

Image 1.1: The ATOMSTACK P1 laser engraver, showcasinzaradi svoje kompaktne zasnove in izjemnihample gravirani predmeti.

1.1 Ključne lastnosti

• 5W diodni laser: Suitable for engraving and cutting a wide range of materials.
• Vsestranska združljivost materialov: Engraves wood, bamboo, paper, leather, cardboard, cork, stone, and more.
• AtomStack Software: Free, user-friendly software with design library and material parameter recommendations. Compatible with LightBurn (sold separately).
• Visoka natančnost: CoreXY structure and dual motor drive for up to 0.1mm positioning accuracy.
• Kompakten in prenosen: Engraving area of 110×110mm, footprint 265×303×185mm, weight approximately 3kg.
• Visokohitrostno graviranje: Up to 10,000mm/min.
• Varnostne funkcije: Fully enclosed design with visible window, built-in focus bar, USB safety interlock, secure enclosure detection, and gyro-based tilt detection.

2. Varnostne smernice

Operating a laser engraver requires adherence to strict safety protocols to prevent injury and damage. Read and understand all safety instructions before operating the ATOMSTACK P1.

2.1 Splošni varnostni ukrepi

• Zaščita oči: Always wear appropriate laser safety glasses when the laser is active and the enclosure is open. The P1 features a visible window for observation, but direct exposure to the laser beam can cause permanent eye damage.
• Prezračevanje: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving.
• Vnetljivi materiali: Ne gravirajte lahko vnetljivih materialov brez ustreznih previdnostnih ukrepov. V bližini imejte gasilni aparat.
• Nadzor: Never leave the engraver unattended during operation.
• Otroci in hišni ljubljenčki: Otroke in hišne ljubljenčke držite stran od delovnega območja.
• Napajanje: Use only the provided power adapter. Ensure the power supply is stable and correctly grounded.

2.2 Vgrajene varnostne funkcije

• Popolnoma zaprta zasnova: The P1 features a fully enclosed design with an orange visible window to contain laser light and fumes.
• Lid-Open Safety Stop: The engraving process automatically pauses if the lid is opened during operation.
• Secure Enclosure Detection: Ensures the enclosure is properly closed before operation.
• Gyro-Based Tilt Detection: Automatically stops operation if the machine is tilted or moved unexpectedly.
• USB Safety Interlock: Prevents operation if the USB connection is interrupted.

Slika 2.1: Konecview of the ATOMSTACK P1's safety features, including the enclosed design and various detection systems.

3. Vsebina paketa

Upon unboxing your ATOMSTACK P1, verify that all components are present and undamaged. Refer to the packing list included with your device for a complete inventory.

4. Nastavitev

The ATOMSTACK P1 is designed for quick setup. Follow these steps to prepare your engraver for its first use.

4.1 Začetna namestitev

• Place the engraver on a stable, level surface.
• Zagotovite zadosten prostor okoli stroja za prezračevanje in dostop.

4.2 Napajalni priključek

1. Connect the power adapter to the engraver's power input port.
2. Priključite napajalnik v ustrezno električno vtičnico.
3. Turn on the main power switch, usually located on the side or back of the unit.

4.3 Laser Module Installation/Replacement

If your laser module is not pre-installed or needs replacement, follow these instructions:

1. Ensure the engraver is powered off and unplugged.
2. Carefully remove the existing laser module or access the installation slot.
3. Align the new laser module with the mounting mechanism and secure it in place.
4. Connect any necessary cables to the laser module.

5. Navodila za uporabo

The ATOMSTACK P1 can be operated using the dedicated AtomStack Studio software or a compatible third-party application like LightBurn.

5.1 Namestitev in povezava programske opreme

Download and install the AtomStack Studio software from the official ATOMSTACK website or app store. The software supports Windows/macOS (USB) and iOS/Android (WiFi/AP).

Image 5.1: The AtomStack Studio software interface shown across multiple devices, highlighting its user-friendly design.

5.1.1 Connecting via AtomStack App (WiFi/AP)

1. Ensure your P1 is powered on.
2. Open the AtomStack app on your iOS or Android device.
3. Follow the in-app instructions to connect to the P1 via WiFi or Access Point (AP) mode.

5.1.2 Connecting via AtomStack Studio Software (USB)

1. Connect the P1 to your Windows or macOS computer using the provided USB cable.
2. Open the AtomStack Studio software.
3. The software should automatically detect the connected device. If not, follow the software's connection prompts.

5.1.3 Connecting via LightBurn Software (USB)

The P1 is compatible with LightBurn software (purchased separately). Refer to LightBurn's documentation for specific connection instructions.

5.2 Postopek graviranja

1. Pripravite material: Place the material to be engraved or cut onto the working platform. Ensure it is flat and securely positioned.
2. Prilagoditev fokusa: Use the built-in focus bar to achieve precise focus. This ensures optimal engraving quality.
3. Izbira dizajna: In the AtomStack Studio software or app, select or create your desired design.
4. Nastavitve parametrov: Adjust engraving parameters (power, speed, passes) based on the material type. The software provides recommended settings.
5. Prejview in položaj: Use the framing function to preview the engraving area on your material. Adjust the material or design position as needed.
6. Začetek graviranja: Close the enclosure lid and initiate the engraving process from the software or app. The machine will automatically pause if the lid is opened during operation.

Slika 5.5: Bližnji posnetek view of the ATOMSTACK P1 performing a detailed engraving, demonstrating its precision.

6. Uporaba dodatkov

The ATOMSTACK P1 supports various accessories to expand its capabilities, such as rotary chucks and rollers for cylindrical objects.

6.1 Using the R8 Rotary Chuck

The R8 Rotary Chuck (sold separately) allows for engraving on cylindrical objects. Ensure the chuck is properly installed and configured in the software.

6.2 Using the R6 Rotary Roller

The R6 Rotary Roller (sold separately) is another accessory for engraving cylindrical items. Adjust the roller gap as needed for different object diameters.

Image 6.3: The ATOMSTACK P1 shown with optional accessories, including rotary chucks, rotary rollers, and an air purifier.

7. Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P1.

7.1 Čiščenje

• Laserska leča: Za ohranjanje kakovosti graviranja redno čistite lasersko lečo z mehko krpo, ki ne pušča vlaken, in raztopino za čiščenje leč.
• Delovno območje: Remove debris and dust from the engraving platform and interior of the machine after each use.
• Zunanjost: Zunanje površine obrišite z adamp krpo. Ne uporabljajte močnih kemikalij.

7.2 Laser Module Care

The laser module is a critical component. Handle it with care and refer to the replacement instructions if necessary.

8. Odpravljanje težav

This section addresses common issues you might encounter with your ATOMSTACK P1.

8.1 Pogoste težave in rešitve

9. Specifikacije

Technical specifications for the ATOMSTACK P1 5W Laser Engraver.

Image 9.1: Detailed specifications and material compatibility chart for the ATOMSTACK P1, including both single and dual laser versions.

10. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the official ATOMSTACK webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Za uveljavljanje garancije shranite račun.

• Uradno Webspletno mesto: Visit the ATOMSTACK official webspletno mesto za najnovejše vire podpore, pogosta vprašanja in kontaktne podatke.
• Storitev za stranke: Contact ATOMSTACK customer support for assistance with product issues or technical guidance.