Uvod
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your TIQLAB 75 x 61 inch L Shaped Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Retain this manual for future reference.
Image: The TIQLAB 75x61 inch L Shaped Electric Standing Desk, showcasing its spacious design and maple finish.
Varnostne informacije
OPOZORILO: Vedno upoštevajte naslednja varnostna navodila, da preprečite poškodbe ali škodo na izdelku.
- Mizo vedno sestavite na stabilni, ravni površini.
- Do not exceed the weight limit of 250 lbs (114 kg).
- Ensure the desk is properly anchored to the floor to prevent tipping, especially when adjusting the height.
- Keep the work area clear of obstacles to prevent accidents during height adjustment.
- Vedno upoštevajte navodila proizvajalca za sestavljanje, uporabo in vzdrževanje.
- Med delovanjem naj se otroci in hišni ljubljenčki ne približujejo mizi.
- Ne sedite in ne stojte na mizi.
- Pred čiščenjem ali vzdrževanjem izključite napajanje.
Image: A diagram illustrating the desk's dimensions and its maximum static load capacity of 250 lbs (114 kg).
Vsebina paketa
Pred začetkom montaže preverite, ali so vse komponente prisotne in nepoškodovane. Če kateri koli deli manjkajo ali so poškodovani, se obrnite na podporo strankam.
- Desktop Panels (L-shaped, with splice board)
- Desk Legs (2 or 3 depending on design)
- Komponente prečne letve/okvirja
- Nadzorna plošča
- Napajalnik in kabel
- Cable Management Tray/Clips
- Montažni material (vijaki, matice, podložke)
- Orodja za montažo (imbus ključ, izvijač)
- Navodila za uporabo
Postavitev in montaža
Assembly typically requires two people. Follow these steps carefully.
- Pripravite delovni prostor: Clear a large, flat area for assembly. Lay down a blanket or cardboard to protect the desktop surfaces from scratches.
- Sestavite okvir mize: Attach the lifting columns to the crossbars and footings according to the diagrams in your specific assembly guide. Ensure all bolts are securely tightened.
- Pritrdite namizne plošče: Carefully place the desktop panels upside down on the protected surface. Align the pre-drilled holes on the desktop with the holes on the assembled frame. Secure the desktop to the frame using the provided screws. For the L-shaped design, ensure the splice board connection is firm.
- Namestitev nadzorne plošče: Mount the control panel to the underside of the desk, typically on the front edge, using the provided screws.
Slika: Podrobna view of the desk's control panel, showing the digital height display and buttons for adjustment and memory presets.
- Povežite ožičenje: Connect the motor cables from the lifting columns to the control box. Connect the control panel cable to the control box. Finally, connect the power adapter to the control box and then to a power outlet. Use cable management accessories to keep wires tidy.
- Začetni vklop in kalibracija: After connecting power, the desk may require initial calibration. Refer to the specific instructions provided with your control panel for calibration steps, which usually involve holding the "down" button until the desk reaches its lowest point and slightly rises.
- Postavitev mize: Carefully flip the desk upright and move it to its desired location. Ensure it is stable and level.
Image: The TIQLAB L-shaped standing desk fully assembled and set up in a modern home office environment.
Navodila za uporabo
Your electric standing desk features intuitive controls for height adjustment and memory presets.
Nastavitev višine
- Dvignite mizo: Pritisnite in držite Puščica gor button to raise the desk. Release the button at your desired height.
- Spodnja miza: Pritisnite in držite Puščica navzdol button to lower the desk. Release the button at your desired height.
Image: A visual representation of the desk's height adjustment range, from sitting to standing positions.
Prednastavitve pomnilnika
The control panel allows you to save preferred sitting and standing heights for quick adjustments.
- Nastavitev položaja pomnilnika:
- Z gumboma gor/dol prilagodite mizo želeni višini.
- Pritisnite "M" or "NASTAVI" button (depending on your control panel model). The display may flash.
- Immediately press one of the numbered preset buttons (e.g., "1", "2", "3"), da shranite trenutno višino na ta položaj.
- Priklic pomnilniškega položaja:
- Press the desired numbered preset button (e.g., "1", "2", "3"). Miza se bo samodejno premaknila na shranjeno višino.
Anti-Collision Feature
The desk is equipped with an anti-collision system. If the desk encounters an obstacle during height adjustment, it will stop and reverse slightly to prevent damage.
Image: An illustration demonstrating the anti-collision technology, showing the desk stopping and reversing upon detecting an obstacle.
Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vaše stoječe mize.
- Čiščenje: Obrišite namizje in okvir z mehko krpoamp cloth. Avoid abrasive cleaners or harsh chemicals. Ensure the desk is unplugged before cleaning.
- Preverite povezave: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary. Verify that all electrical cables are securely connected and free from damage.
- Upravljanje kablov: Keep cables organized to prevent snagging or damage during height adjustments.
- Porazdelitev teže: Težo enakomerno porazdelite po mizi, da preprečite obremenitev dvižnega mehanizma.
Odpravljanje težav
If you encounter issues with your desk, refer to the following common solutions.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Pisalna miza se ne premakne. | No power, loose cable, motor overload. | Check power connection. Ensure all cables are securely plugged in. Reduce weight on the desk. Perform a reset (unplug for 30 seconds, then plug back in). |
| Miza se premika neenakomerno ali oddaja nenavaden hrup. | Uneven weight distribution, loose connections, obstruction. | Distribute weight evenly. Check and tighten all assembly bolts. Ensure no objects are obstructing the lifting columns. |
| Koda napake, prikazana na nadzorni plošči. | Specifična sistemska napaka. | Refer to the specific error code in your control panel's supplementary guide (if provided). Often, a power cycle (unplug, wait 30 seconds, plug in) can resolve temporary errors. |
| Anti-collision feature triggers too easily or not at all. | Sensitivity setting, obstruction. | Check for any objects near the desk. Some control panels allow adjustment of anti-collision sensitivity; refer to your control panel's guide. |
If the problem persists after attempting these solutions, please contact TIQLAB customer support.
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | TIQLAB |
| Model | 75x61 inch with splice board |
| Vrsta mize | Električna stoječa miza v obliki črke L |
| Material za namizni računalnik | Konstruiran les |
| barva | Javor |
| Dimenzije (skupno) | 75" (long side) x 61" (short side) x 23.6" (depth of each side) |
| Območje nastavitve višine | 28.3" do 47.2" |
| Največja nosilnost | 250 lbs (114 kg) |
| Noise Level (Operation) | Manj kot 50 dB |
| Posebne lastnosti | Electric Height Adjustment, Memory Presets, Anti-Collision Technology |
Garancija in podpora strankam
TIQLAB products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For any questions, issues, or assistance with your TIQLAB L Shaped Electric Standing Desk, please do not hesitate to contact our dedicated customer support team. We are committed to resolving your concerns and ensuring your complete satisfaction.
Kontaktni podatki: Please refer to the contact details provided on the TIQLAB official webspletnem mestu ali na vašem računu.