Vention ADKB0-EU

VENTION Mini HDMI Wireless Transmitter and Receiver

Model: ADKB0-EU

Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your VENTION Mini HDMI Wireless Transmitter and Receiver. This device allows for wireless transmission of 1080P@60Hz video and audio signals over a 5GHz connection, eliminating the need for long HDMI cables.

Pred uporabo izdelka natančno preberite ta priročnik, da zagotovite pravilno delovanje in se izognete morebitnim težavam.

Kaj je v škatli

Preverite, ali so v paketu prisotni vsi elementi:

  • 1 x brezžični oddajnik HDMI
  • 1 x brezžični sprejemnik HDMI
  • 2 x USB-C Power Cords (0.5m)
  • 1 x uporabniški priročnik
Contents of the VENTION Mini HDMI Wireless Transmitter and Receiver package, including the transmitter, receiver, two USB-C cables, and a user manual.

Image: Package contents showing the wireless HDMI transmitter, receiver, two USB-C power cables, and the user manual.

Navodila za namestitev

The VENTION Mini HDMI Wireless system is designed for plug-and-play operation, requiring no software installation or complex network configuration.

  1. Connect the HDMI Receiver (RX): Insert the HDMI Receiver (RX) into an available HDMI port on your display device (TV, monitor, or projector). Connect one of the provided USB-C power cords to the RX unit and the other end to a power source (e.g., USB adapter, power bank, or a USB port on your display device).
  2. Adjust Input Source: On your display device, select the correct HDMI input source to match the port where the RX unit is connected. This will allow the display to receive the signal from the transmitter.
  3. Connect the HDMI Transmitter (TX): Insert the HDMI Transmitter (TX) into the HDMI output port of your source device (e.g., laptop, PC, gaming console, camera). Connect the second USB-C power cord to the TX unit and the other end to a power source (e.g., USB adapter, power bank, or a USB port on your source device).

Once both units are powered and connected, the system will automatically establish a wireless connection, and your content should appear on the display.

Diagram showing the connection steps for the VENTION wireless HDMI system. Step 1: Connect the HDMI Receiver (RX) to a display and power. Step 2: Adjust the input source on the display. Step 3: Connect the HDMI Transmitter (TX) to a computer and power.

Image: Step-by-step connection guide for the HDMI wireless transmitter and receiver.

Close-up image of the VENTION wireless HDMI units showing the dedicated USB-C power port and the included 0.5m USB-C cables.

Image: Detail of the USB-C power port on the units and the included power cables.

Navodila za uporabo

Mirror or Extend Mode

The system supports both Mirror and Extend display modes. The mode selection is typically managed through your source device's operating system display settings (e.g., Windows Display Settings, macOS System Preferences). Ensure your computer supports extended mode if you wish to use this feature.

  • zrcalni način: Duplicates your source device's screen onto the connected display.
  • Razširjeni način: Extends your source device's desktop, allowing for a multi-monitor setup.
Diagram illustrating Mirror Mode and Extend Mode for display output. In Mirror Mode, the laptop screen is duplicated on the external monitor. In Extend Mode, the external monitor acts as a secondary, independent display.

Image: Visual representation of Mirror and Extend display modes.

One-Click Disconnect/Reconnect

The system features a simple one-click function for disconnecting and reconnecting the wireless signal. This is useful for quickly switching presentations or sharing screens in a meeting environment without replugging cables. Refer to the TX unit for the specific button or indicator.

A person's hand pressing a button on the VENTION wireless HDMI transmitter connected to a laptop, with a large screen displaying data in the background, indicating a one-click disconnect/reconnect feature for efficient meetings.

Image: Demonstrating the one-click disconnect/reconnect feature during a meeting.

Transmission Range and Stability

The device supports wireless transmission up to 50 meters (165 feet) in open environments, utilizing a 5GHz protocol for strong and stable signals. Actual performance may vary based on environmental factors such as walls and other obstructions.

An image depicting the VENTION wireless HDMI system transmitting a signal from a laptop to a large projector screen in a lecture hall, highlighting a transmission distance of 50 meters or 164 feet.

Image: Illustration of the 50-meter wireless transmission range in an open space.

Široka združljivost

The VENTION wireless HDMI system is compatible with a broad range of devices:

  • Transmitter (TX) Compatible Devices: Laptops, PCs, gaming consoles, cameras, TV boxes, and any device with an HDMI output. For USB-C devices, ensure they support DisplayPort Alternate Mode (DP Alt Mode).
  • Receiver (RX) Compatible Devices: Smart TVs, monitors, projectors, and any display device with an HDMI input.
Diagram showing the multi-compatibility of the VENTION wireless HDMI system. The transmitter can connect to cameras, TV boxes, PCs, laptops, and gaming consoles. The receiver can connect to projectors, TVs, and monitors.

Image: Compatibility chart for various source and display devices.

Vzdrževanje

To ensure the longevity and optimal performance of your VENTION Mini HDMI Wireless Transmitter and Receiver, follow these maintenance guidelines:

  • Čiščenje: Use a soft, dry cloth to clean the devices. Avoid using liquid cleaners, aerosols, or solvents.
  • Shranjevanje: Naprave shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
  • Ravnanje: Z enotami ravnajte previdno. Pazite, da vam ne padejo ali da jih ne izpostavljate močnim udarcem.
  • Napajanje: Always use the provided USB-C power cords and ensure a stable power source. Insufficient power can lead to unstable performance.
  • Prezračevanje: Ensure the units have adequate ventilation during operation to prevent overheating.

Odpravljanje težav

If you encounter issues with your VENTION Mini HDMI Wireless system, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
No signal or display on screen
  • Zrahljane povezave
  • Nezadostna moč
  • Izbran napačen vhodni vir
  • Motnje
  • Check all HDMI and USB-C connections.
  • Ensure both TX and RX units are properly powered.
  • Verify the correct HDMI input is selected on your display.
  • Reduce distance between TX and RX, remove obstacles.
Poor video quality or latency
  • Prevelika razdalja
  • Obstructions (walls, furniture)
  • Strong wireless interference
  • Source device output issues
  • Move TX and RX closer to each other.
  • Ensure a clear line of sight if possible.
  • Avoid placing near other 5GHz wireless devices.
  • Check source device's display settings.
Units feel warm during operationNormalno delovanjeThis is normal for electronic devices during use. Ensure adequate ventilation and do not cover the units.
USB-C device not transmittingDevice does not support DP Alt ModeEnsure your USB-C source device supports DisplayPort Alternate Mode for video output. Not all USB-C ports support video.

Specifikacije

FunkcijaSpecifikacija
ZnamkaVention
Številka modelaADKB0-EU
barvaČrna
Resolucija1080p@60Hz (Ultra HD)
Brezžična frekvenca5 GHz
Obseg prenosaDo 50 metrov (165 čevljev) na odprtih območjih
PovezljivostHDMI, USB-C (for power)
Posebne lastnostiPlug and Play, Mirror/Extend Mode, Miracast
Dimenzije izdelka7.3 D x 2.6 Š x 1.1 V centimetrov
TežaApproximately 60g per unit
Image showing the compact size of the VENTION wireless HDMI unit, with dimensions 25.8 x 12 x 3 mm (1.02 x 0.47 x 0.12 inches) and a weight of 60g, fitting easily into a small pouch.

Image: The compact and lightweight design of the wireless HDMI units.

Informacije o garanciji

This VENTION product comes with a 1-letna garancija proizvajalca od datuma nakupa. Ta garancija krije napake v materialu in izdelavi pri normalni uporabi. Ne krije škode, ki jo povzročijo nepravilna uporaba, nesreče, nepooblaščene spremembe ali zunanji vzroki.

Za garancijske zahtevke shranite dokazilo o nakupu.

Podpora uporabnikom

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact VENTION customer support through the retailer where you purchased the product or visit the official VENTION webspletno mesto za kontaktne podatke.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.