UTRAI 5000A 150PSI Jump Starter with Air Compressor Instruction Manual

1. Uvod

The UTRAI 5000A 150PSI Jump Starter with Air Compressor is a versatile and essential tool for vehicle owners. This multi-functional device combines a powerful jump starter, a high-efficiency air compressor, a portable power bank, and an emergency LED torch. Designed for reliability and ease of use, it ensures you are prepared for various roadside emergencies and power needs.

2. Vsebina paketa

Po razpakiranju preverite vsebino paketa:

• UTRAI 5000A 150PSI Jump Starter with Air Compressor (Model: JS-10)
• Pametni skakalec Clamps
• Inflation Hose with 4 Nozzle Adapters
• Polnilni kabel USB-C
• Uporabniški priročnik
• Torbica za shranjevanje

3. Izdelek je končanview

The UTRAI JS-10 is engineered for durability and functionality, featuring a robust casing in intuitiven vmesnik.

Slika 1: Spredaj view of the UTRAI JS-10 showing the 2-inch digital display and control buttons.

3.1. Ključne komponente

• 2-Inch Digital Display: Shows battery level, real-time tire pressure, inflation mode, and charging status.
• Gumb za vklop: Aktivira napravo in preveri raven napolnjenosti baterije.
• Inflation Mode Button (M/U): Switches between inflation modes (car, motorcycle, bicycle, ball, custom) and pressure units (BAR/KPA/PSI).
• Gumbi +/-: Prilagodi ciljni tlak.
• LED gumb za luč: Aktivira in preklaplja med načini svetilke.
• Jumpstart Port: Connects smart jumper clamps.
• Air Compressor Port: Connects inflation hose.
• Vhod/izhod USB-C (PD65W): For charging the device and fast charging external devices.
• USB-A Outputs (15W/18W & 12W): Za polnjenje zunanjih naprav.
• DC Output (120W-160W): For powering 12V accessories.

4. Nastavitev

4.1. Začetno polnjenje

Before first use, fully charge the UTRAI JS-10. Use the provided USB-C charging cable and a compatible PD65W wall adapter (not included) for optimal charging speed. The digital display will show the charging status and battery percentage. A full charge from 0% to 100% can take approximately 1.5 hours with a PD65W adapter.

• Connect the USB-C charging cable to the USB-C port on the jump starter.
• Connect the other end of the cable to a suitable USB wall adapter.
• The display will indicate 'IN' and the battery percentage will increase as it charges.
• Once 100% is displayed, the device is fully charged.

5. Navodila za uporabo

5.1. Zagon vozila s pomočjo kablov

The UTRAI JS-10 can reliably revive 12V vehicles (all gasoline engines and up to 10L diesel engines). It supports 30-50 jump starts on a single charge.

Figure 2: Connecting the smart jumper clamps na avtomobilski akumulator.

• Ensure the jump starter has sufficient charge (above 50% recommended).
• Insert the smart jumper clamps into the jumpstart port of the device.
• Povežite rdeči clamp na pozitivni (+) pol akumulatorja vozila.
• Povežite črni clamp na negativni (-) pol akumulatorja vozila.
• The digital display on the jump starter will show the battery voltage and 'READY' if safe to start.
• Force Start Mode (for totally dead batteries): If the display does not show 'READY' or the battery is extremely low, press and hold the 'BOOST' button on the smart clamp for approximately 3 seconds until the indicator turns solid green. This bypasses safety checks for a quick boost.
• Zaženite motor vozila.
• Ko se motor zažene, takoj odstranite pametni ključamps priključkov akumulatorja vozila v 30 sekundah.
• Disconnect the smart clamps od zaganjalnika.

5.2. Uporaba zračnega kompresorja

The built-in 150PSI air compressor features auto-shutoff at preset pressures and includes 4 nozzle adapters for various inflatables.

Figure 3: The UTRAI JS-10's air compressor in action, inflating a car tire.

• Short press the Power Button to turn on the device.
• Screw the inflation hose into the air compressor port on the device.
• Attach the appropriate nozzle adapter to the other end of the hose and connect it securely to the item you wish to inflate (e.g., tire valve).
• Press the 'M/U' button to cycle through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA).
• Use the '+/-' buttons to set your desired target pressure.
• Press the Power Button again to start inflation. The compressor will automatically stop once the preset pressure is reached.
• Disconnect the hose and store the device.

5.3. Uporaba kot power bank

The UTRAI JS-10 features a 27000mAh battery capacity and multiple output ports for charging various electronic devices.

Figure 4: Close-up of the fast charging USB-C and USB-A output ports.

• Short press the Power Button to activate the device.
• Connect your electronic device (phone, tablet, etc.) to the appropriate USB-C or USB-A output port using a compatible charging cable.
• The device will begin charging. The digital display will show 'OUT' indicating power output.
• For 12V accessories, use the DC output port with a suitable connector.

5.4. Using the LED Torch

The 600-lumen LED torch offers 4 modes for various emergency lighting needs.

Figure 5: Illustration of the various LED light modes including spotlight, SOS, strobe, and red warning light.

• Press and hold the LED Light Button for 3 seconds to turn on the spotlight mode.
• Short press the button again to cycle through the modes: SOS, Strobe, and Red Warning Light (like a warning triangle).
• Press and hold the button for 3 seconds to turn off the LED torch.

6. Vzdrževanje

• Napravo hranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in vlage.
• Recharge the device every 3-6 months to maintain battery health, even if not used.
• Napravo vzdržujte čisto in brez prahu ter umazanije. Za čiščenje uporabljajte mehko, suho krpo.
• Do not disassemble the product. Refer to qualified service personnel for repairs.

7. Odpravljanje težav

Pametni skakalec klamps have built-in indicators and audible alerts for common issues:

• Flashing Green/Red: Not connected to battery or incorrect connection.
• Svetlo zeleno: Pripravljen za zagon.
• Sveti rdeče z zvočnim signalom: Reverse polarity connection. Disconnect and reconnect correctly.
• Flashing Red with Beep: Short circuit. Disconnect immediately.
• Trdno rdeče: Overheating. Allow device to cool down.
• Nizka glasnosttage: Baterija voltage is too low. Use Force Start mode if necessary.

If the device fails to operate as expected, please refer to the user manual for detailed troubleshooting steps or contact customer support.

8. Specifikacije

9. Garancija in podpora

UTRAI offers a 24-month replacement warranty for the JS-10 jump starter. For any product-related inquiries, technical assistance, or warranty claims, please contact UTRAI customer support. Refer to the user manual for contact details.