1. Uvod
The EARU Automatic Voltage Protector (Model EARU-1005) is an advanced electrical safety device designed to protect your valuable home and office appliances from damaging power fluctuations. This device offers comprehensive protection against over-voltage, pod voltage, and overcurrent conditions, ensuring the longevity and safe operation of your electrical equipment. It features adjustable thresholds and an auto-reconnect function for convenience and continuous protection.
2. Ključne značilnosti
- Vsestranska zaščita: Safeguards appliances from power surges, over-voltage (above 275V), under-voltage (below 175V), and adjustable overcurrent (1A-63A).
- Natančna nastavitev: Customizable cut-off thresholds for over-voltage (200V-275V) and under-voltage (175V-200V) to suit specific grid conditions and appliance needs.
- Funkcija samodejne ponastavitve: Automatically restores power within 60-300 seconds once grid voltage stabilizes within the set safe range, eliminating manual intervention.
- Vrhunska prevodnost: Constructed with 100% pure copper conductors for minimal resistance, efficient operation, and enhanced long-term reliability under heavy 63A loads.
- Namestitev DIN letve: Designed for easy and secure integration into standard 2-Pole, 36mm width DIN Rail electrical panels.
- Celovita varnost: Provides robust protection for an entire household against unpredictable voltage nihanja in vzponi.
Slika 2.1: Konecview of the protection capabilities of the EARU Automatic Voltage Zaščitnik.
3. Varnostne informacije
Please read and understand all safety instructions before installing or operating the device. Failure to do so may result in electric shock, fire, or serious injury.
- Namestitev naj izvede le usposobljen električar v skladu z lokalnimi električnimi predpisi in predpisi.
- Pred kakršnimi koli namestitvenimi ali vzdrževalnimi deli se prepričajte, da je glavno napajanje izklopljeno.
- Naprave ne uporabljajte, če je videti poškodovana ali če je bila izpostavljena vlagi.
- Verify correct wiring connections (Line and Neutral) to prevent malfunction or damage.
- Naprava je zasnovana samo za uporabo v zaprtih prostorih.
- Ne prekoračite največje dovoljene tokovne moči 63 A.
4. Izdelek je končanview
4.1. Komponente in zaslon
The EARU Automatic Voltage Protector features a clear digital display and intuitive control buttons for easy monitoring and adjustment.
- voltage Zaslon: Prikazuje trenutno glasnost vrsticetage.
- Trenutni zaslon: Shows the current load in Amperes.
- Indikatorske lučke:
>U: Nadglastagindikator e.<U: Pod voltagindikator e.>Ie: Overcurrent indicator.R/T: Reset/Time indicator.
- Gumbi za upravljanje:
- Up Arrow (▲) / Down Arrow (▼): Used to adjust parameter values.
- Gumb SET: Press and hold for 3 seconds to enter setting mode.
- Gumb za vklop / izklop: Toggles power to the protected circuit.
Slika 4.1: Spredaj view of the EARU Automatic Voltage Protector, highlighting its digital display and control buttons.
5. Nastavitev in namestitev
The EARU Automatic Voltage Protector is designed for DIN Rail mounting. Ensure proper wiring and secure installation.
5.1. Montaža
Mount the device onto a standard 36mm width DIN Rail within your electrical panel. Ensure it is securely clipped into place.
5.2. Shema ožičenja
Connect the incoming power supply (Line and Neutral) to the "IN" terminals and the outgoing load to the "OUT" terminals. Refer to the diagram below for correct wiring.
Slika 5.1: Primerample wiring configuration for DIN Rail installation.
Image 5.2: Device dimensions for installation planning.
6. Navodila za uporabo
The device allows for precise adjustment of protection parameters. Follow these steps to configure your voltage zaščitnik.
6.1. Parameter Setting Mode
- Prepričajte se, da je naprava vklopljena.
- Pritisnite in držite NASTAVI button for approximately 3 seconds until the display changes to show "P-1" or a similar setting indicator. This indicates you are in parameter setting mode.
- Uporabite Puščica navzgor (▲) in Puščica navzdol (▼) buttons to navigate through the different parameters (P-1 to P-6).
- Once you have selected a parameter, press the NASTAVI button briefly to enter its adjustment mode.
- Uporabite Puščica navzgor (▲) in Puščica navzdol (▼) gumbe za spreminjanje vrednosti.
- Pritisnite NASTAVI button again to confirm the value and move to the next parameter, or wait a few seconds for the device to automatically save and exit the setting mode.
6.2. Opisi parametrov
| Parameter | Opis | Nastavljiv razpon |
|---|---|---|
| P-1 | Nad-zvtage nastavitev | 240V - 300V (or OFF) |
| P-2 | Pod-voltage nastavitev | 140V - 200V (or OFF) |
| P-3 | Overcurrent setting | 1A - 40A / 63A / 80A (depending on model) |
| P-4 | Reset/start delay | 1s - 300s |
| P-5 | Relay recovery delay | 1s - 300s |
| P-6 | Overcurrent recovery delay | 1s - 300s |
Image 6.1: Function setting guide for the device.
6.3. Video Guide: Setting Parameters
Video 6.1: This video demonstrates how to adjust the over-voltage, pod voltage, overcurrent, and recovery delay settings on the EARU Automatic Voltage Protector. It shows the step-by-step process of entering the setting mode and modifying each parameter.
7. Vzdrževanje
The EARU Automatic Voltage Protector requires minimal maintenance. Regular checks can ensure optimal performance.
- Občasno preverite napravo glede morebitnih vidnih poškodb ali ohlapnih priključkov.
- Ensure the ventilation slots are clear of dust and debris to prevent overheating.
- Clean the exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for servicing.
8. Odpravljanje težav
If you encounter issues with your EARU Automatic Voltage Protector, refer to the following common troubleshooting steps:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Naprava se ne vklopi | No input power; incorrect wiring; internal fault. | Check main power supply. Verify wiring connections. If problem persists, contact support. |
| Power cuts off frequently | voltage/current outside set thresholds; unstable grid. | Check current voltage/current readings. Adjust P-1, P-2, P-3 settings if necessary. Monitor grid stability. |
| Device does not auto-reconnect | Recovery delay (P-4, P-5, P-6) set too long; persistent fault. | Verify recovery delay settings. Ensure grid conditions have stabilized. Manually reset if safe to do so. |
| Nepravilna voltage/trenutno odčitavanje | Calibration issue; faulty sensor. | Za pomoč se obrnite na podporo strankam. |
9. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | EARU |
| Model | EARU-1005 |
| Dimenzije izdelka (DxŠxV) | 7.7 x 3.5 x 6.5 cm |
| Teža predmeta | 450 g |
| Vhodna voltage | 230 V AC |
| Max Wattage | 13800 vatov |
| Maks. Tok | 63 Amperes |
| Nad-zvtagObmočje zaščite e | Adjustable 200V-275V (Cut-off above 275V default) |
| Pod-voltagObmočje zaščite e | Adjustable 175V-200V (Cut-off below 175V default) |
| Auto-Reconnect Delay | Nastavljivo 60-300 sekund |
| Vrsta namestitve | DIN Rail (2-Pole, 36mm width) |
| Material prevodnika | 100% Pure Copper |
| Država izvora | Indija |
10. Garancija in podpora
The EARU Automatic Voltage Protector (Model EARU-1005) is backed by a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use.
- For warranty claims or technical support, please contact EARU customer service.
- Račun shranite kot dokazilo o nakupu za potrditev garancije.
- Nepooblaščena popravila ali spremembe razveljavijo garancijo.