1. Uvod
Thank you for choosing the FULODE STUDIO22+ UHF Wireless In-Ear Monitor System. This system provides reliable, high-quality mono audio monitoring for musicians, singers, and stage performers. Operating on the UHF 550–579.25 MHz band with 100 preset frequencies, it ensures stable performance and freedom of movement. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.

Slika 1.1: Konecview of the FULODE STUDIO22+ Wireless In-Ear Monitor System, showing the transmitter, bodypack receiver, and in-ear headphones.
2. Vsebina paketa
Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:
- 1 x Wireless Desktop Transmitter
- 2 x Wireless Bodypack Receivers
- 2 x In-Ear Headphones
- 2 x Enhanced Antennas
- 1 x 6.35 mm avdio kabel
- 1 x napajalnik
- 1 x Uporabniški priročnik (ta dokument)

Slika 2.1: Podrobno view of the package contents and dimensions of the main units.
3. Navodila za nastavitev
3.1. Nastavitev oddajnika
- Priključite napajanje: Connect the included power adapter to the DC 12V input on the rear panel of the transmitter and plug it into a power outlet.
- Pritrdite antene: Screw the two enhanced antennas onto the ANTENNA connectors on the rear panel of the transmitter. Position them vertically for optimal signal reception.
- Avdio vhod: Connect your audio source (e.g., mixer, audio interface) to the transmitter's audio input jacks (AF IN L/R) using XLR or 6.35mm cables. The rear panel also provides a 6.35mm mixed input and an independent audio input.
- Rackmount Installation (Optional): If desired, attach the included rackmount brackets to the sides of the transmitter for secure installation in a standard equipment rack.
3.2. Bodypack Receiver Setup
- Namestite baterije: Open the battery compartment on the back of the bodypack receiver and insert two AA batteries (not included), ensuring correct polarity.
- Priključite slušalke: Plug the in-ear monitoring headphones into the 3.5mm PHONES jack on the top of the bodypack receiver.

Image 3.1: Wiring schematic illustrating connections for the transmitter, audio mixer, and bodypack receiver.
4. Navodila za uporabo
4.1. Vklop/izklop
- Oddajnik: Dolgo pritisnite MOČ button on the front panel to turn the unit on or off.
- Bodypack Receiver: Zavrtite GLASNOST potentiometer clockwise to turn the receiver on. Rotate counter-clockwise until it clicks to turn off.
4.2. Izbira frekvence in kanala
The system operates on 100 preset frequencies within the UHF 550–579.25 MHz band. Ensure the transmitter and receiver are set to the same group and channel for proper communication.
4.2.1. Transmitter Channel Setting
- Izbira skupine: Pritisnite NASTAVI button once. Use the left or right arrow buttons to select the desired group.
- Izbira kanala: Pritisnite NASTAVI button twice. Use the left or right arrow buttons to select the desired channel within the chosen group.

Image 4.1: Controls and display for adjusting group and channel settings on the transmitter unit.
4.2.2. Bodypack Receiver Channel Setting
- Izbira skupine: Pritisnite NASTAVI button once. Use the GOR/DOL buttons to select the desired group. Press ESC to confirm or exit.
- Izbira kanala: Pritisnite NASTAVI dvakrat pritisnite gumb. Uporabite GOR/DOL buttons to select the desired channel. Press ESC to confirm or exit.

Image 4.2: Controls and display for adjusting group and channel settings on the bodypack receiver.
4.3. Prilagoditev glasnosti
Adjust the monitoring volume using the GLASNOST potentiometer on the bodypack receiver. Start with a low volume and gradually increase to a comfortable listening level.
4.4. Spremljanje uspešnosti
The system provides stable mono in-ear monitoring with clear, low-latency audio. The centered sound helps reduce phase issues, feedback, and ambient interference, making it ideal for reliable stage monitoring, vocals, and speech applications. The wireless range extends up to 262 feet (80 meters) in optimal conditions.

Image 4.3: Illustration of the system's wireless reception range, indicating up to 260ft.
5. Vzdrževanje
- Čiščenje: Use a soft, dry cloth to clean the surfaces of the transmitter and receivers. Avoid using liquid cleaners or solvents.
- Shranjevanje: Store the system in a dry, cool place away from direct sunlight and extreme temperatures.
- Vzdrževanje baterije: Remove batteries from the bodypack receivers if the system will not be used for an extended period to prevent leakage and damage.
- Skrb za anteno: Z antenami ravnajte previdno, da se ne upognejo ali zlomijo.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Ni zvoka iz slušalk |
|
|
| Interference or poor signal |
|
|
| Low battery indicator on receiver | Baterije so skoraj prazne | Zamenjajte s svežimi AA baterijami. |
7. Specifikacije
| Funkcija | Opis |
|---|---|
| Znamka | FULODE |
| Številka modela | STUDIO22+ |
| Brezžična tehnologija | UHF |
| Frekvenčni pas | 550–579.25 MHz |
| Število frekvenc | 100 prednastavljene frekvence |
| Brezžično Domet | Do 262 čevljev (80 metrov) |
| Namestitev ušesa | V ušesu |
| Impedanca | 16 Ohmov |
| Material ohišja | ABS plastika, kovina |
| Napajanje sprejemnika | 2 x AA baterije (niso vključene) |
| Priključek za slušalke | 3.5 mm (Receiver), 6.35 mm (Transmitter output) |
| Dodatne funkcije | Volume Control, LCD Screen, Rackmount capability |
8. Informacije o garanciji
The FULODE STUDIO22+ In-Ear Monitor System comes with a 2-letna garancija from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official FULODE webspletno mesto ali se obrnite na podporo strankam.
9. Podpora strankam
If you encounter any issues or have questions regarding your FULODE STUDIO22+ In-Ear Monitor System that are not addressed in this manual, please contact FULODE customer support. You can typically find contact information on the official FULODE webspletnem mestu ali prek prodajalca, kjer ste izdelek kupili.
Please have your model number (STUDIO22+) and purchase details ready when contacting support.