Protmex 2-in-1 Cordless Pole Saw & Mini Chainsaw

Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Protmex 2-in-1 Cordless Pole Saw and Mini Chainsaw. Please read this manual thoroughly before initial use and keep it for future reference.

Image: The Protmex 2-in-1 Cordless Pole Saw and Mini Chainsaw, showcasing its dual functionality and included accessories such as batteries, charger, safety glasses, and gloves.

Varnostne informacije

Pri uporabi električnega orodja vedno dajte prednost varnosti. Neupoštevanje varnostnih navodil lahko povzroči resne poškodbe ali materialno škodo.

• Nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali, rokavicami in zaščito za sluh.
• Zagotovite, da na delovnem območju ni drugih opazovalcev, zlasti otrok in hišnih ljubljenčkov.
• Inspect the tool before each use for any damage or loose parts.
• Keep hands and feet away from the chain when the tool is in operation.
• Utilize the safety button to prevent accidental activation.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Pred kakršnim koli vzdrževanjem, čiščenjem ali shranjevanjem orodja vedno odstranite baterijo.

Image: Visual representation of key safety features including the strap design, sponge handle, wood chip guard, tool-free chain adjustment, safety button, and auto cooling system.

Nastavitev

1. Razpakiranje in identifikacija komponent

Previdno vzemite vse komponente iz embalaže. Preverite, ali so vsi deli prisotni in nepoškodovani.

Image: All components of the Protmex 2-in-1 Cordless Pole Saw and Mini Chainsaw laid out, including the main unit, pole extension, batteries, charger, and protective gear.

2. Polnjenje in namestitev baterije

The unit comes with two 4.0Ah 21V batteries. Fully charge both batteries before first use. Insert a charged battery into the tool's battery slot until it clicks into place.

Slika: Podrobna view of the 2x4000mAh 21V Lithium-Ion battery, highlighting its capacity and fast charge capability.

Image: Two 4.0Ah batteries and the charger, emphasizing larger capacity and longer run time with 2-hour fast charge.

3. Sestavljanje žage z drogom

1. Attach the Chainsaw Head: Align the chainsaw head with the pole extension and push firmly until it locks into place.
2. Prilagodi višino palice: Extend the pole to your desired length (4.2-7.8ft) and secure the clamps. The maximum total working length can reach 15ft (based on a 6ft person holding the pole in a straightened position at shoulder level, 60 degrees from ground).

Image: Step-by-step guide showing how to attach the chainsaw head, adjust pole height, insert the battery, and press the safety button and trigger to start the chainsaw.

Image: Illustration demonstrating the adjustable pole length (5.7ft to 9.2ft, up to 15ft total working length) and the 0-180 degree adjustable cutting angles.

4. Nastavitev napetosti verige

The pole saw features a tool-free chain tensioning system. Before each use, check the chain tension. If loose, adjust it with a simple twist of the knob. Ensure the knob is turned clockwise after adjustment to secure it and prevent loosening during use.

Image: Close-up of the tool-free adjustment knob for chain tensioning, showing how to loosen, adjust, and tighten the chain.

Image: Detailed steps for installing a replacement chain and adjusting its tension, including turning the green cover, pushing the pin, placing the guide bar, and tightening the cover.

5. Automatic Oil System

The chainsaw is equipped with an automatic oil lubrication system. Ensure the oil reservoir is filled with appropriate chain oil before operation. This system ensures smooth cutting and reduces maintenance.

Image: A visual of the automatic oil system, showing oil being poured into the reservoir for continuous lubrication during operation.

Navodila za uporabo

1. Starting the Tool

To start the chainsaw, first press the safety button, then pull the trigger. Release the trigger to stop the tool.

2. Using as a Pole Saw

For high branches, attach the chainsaw head to the extendable pole. Adjust the pole length and the cutting angle (0-180 degrees) to safely reach and cut branches from the ground. The tool is designed for effortless control with rubber-coated handles and an adjustable shoulder strap.

Image: A user operating the tool in pole saw configuration to trim high branches, demonstrating its extended reach and 2-in-1 functionality.

Image: The pole saw being used for tree pruning, showing its effectiveness in reaching and cutting overhead branches.

3. Using as a Mini Chainsaw

Detach the chainsaw head from the pole for ground-level tasks or smaller branches. The mini chainsaw is lightweight (3.3 lbs) and easy to handle, making it suitable for various cutting needs.

Image: The mini chainsaw being used for trimming tasks, demonstrating its versatility for ground-level work.

Image: The mini chainsaw cutting through wood, illustrating its power and efficiency for various wood cutting applications.

4. Tehnike rezanja

• Always ensure a stable footing and balance before cutting.
• Allow the saw to reach full speed before engaging the chain with the material.
• Do not force the saw; let the chain do the work.
• Be aware of kickback and falling branches.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega orodja.

• Mazanje verige: The automatic oil system will lubricate the chain during operation. Regularly check the oil level and refill as needed with suitable chain oil.
• Napetost verige: Check chain tension before each use and adjust if necessary to prevent loosening.
• Čiščenje: After each use, clean the tool, especially the chain and guide bar, to remove sawdust and debris. Ensure the battery is removed before cleaning.
• Shranjevanje: Store the tool in a dry, secure place, out of reach of children. Remove batteries for long-term storage.

Odpravljanje težav

Specifikacije

• Model: PTX-8IN
• vir energije: Napajanje na baterije
• Motor: Brushless, 900 Watts
• Baterija: 2 x 21V 4.0Ah litij-ionska baterija
• Hitrost verige: 0-10 m/s
• Dolžina palice: 8 palcev
• Pole Extension: 4.2 - 7.8 ft (Max total working length: 15 ft)
• Teža izdelka: 7.5 funtov (skupaj)
• Mini Chainsaw Weight: 3.3 lbs
• Dimenzije izdelka: 5 cm D x 5 cm Š x 15 cm V (zgoščeno)

Garancija in podpora

Protmex offers 3 years of after-sales support for this product. For any concerns or assistance, our customer service is available 24/7. Please refer to your purchase documentation for specific warranty terms and contact information.

You can also visit the official Protmex Store for more information: Protmex Store

Image: Protmex brand logo, slogan, and an icon representing 24/7 customer service.