mGYDY Bafang 810S LCD eBike Display User Manual

1. Uvod

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Varnostne informacije

• Pred vožnjo vedno preverite, ali je zaslon varno nameščen.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Med vožnjo bodite pozorni na okolico. Ne dovolite si, da bi vas zaslon preveč motil.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Izdelek je končanview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Slika: konecview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Ključne značilnosti:

• Color VA LCD: Široko viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Celovit prikaz podatkov: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage procenttagin).
• Nastavljiva svetlost: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Način hoje: Provides assistance when walking alongside your e-bike.
• Prikaz kode napake: Indicates system faults.
• Vodotesen razred: IP65, resistant to rain and splashing water.

5. Specifikacije

Slika: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Nastavitev in namestitev

Preverjanje združljivosti:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the Komunikacijski protokol UART in a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Slika: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Koraki namestitve:

1. Namestitev zaslona: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Priključite kabel: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Upravljanje kablov: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. Začetni vklop: After installation, power on your e-bike to verify the display functions correctly.

7. Navodila za uporabo

The 810S display features an intuitive interface with an independent button for navigation and settings.

Zaslonske funkcije:

• Indikator hitrosti: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Kazalnik prevoženih kilometrov: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indikator baterije: Provides a 5-level power indicator and voltage procenttage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Nadzor žarometov: Activate or deactivate your e-bike's headlight (if connected).
• Način hoje: Engage for low-speed assistance when pushing the bike.
• Koda napake: Displays codes if a system fault is detected.

Slika: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Prilagoditev nastavitev:

• Nastavitev svetlosti: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Geslo ob vklopu: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Slika: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Vzdrževanje

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• Čiščenje: Uporabite mehko, damp krpo za čiščenje zaslona. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala zaslon ali ...asing.
• Vodoodpornost: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Shranjevanje: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Preverjanje povezave: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Slika: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. Odpravljanje težav

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• Zaslon se ne vklopi:
  • Preverite, ali je baterija električnega kolesa napolnjena in vklopljena.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Prikazana koda napake:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Netočni odčitki:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

Če težave ne izginejo, se za pomoč obrnite na prodajalca ali usposobljenega tehnika za električna kolesa.

10. Garancija in podpora

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.