HUANUO 3-Stage Standing Desk Frame

1. Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your HUANUO 3-Stage Ogrodje za stoječo mizo. Pred namestitvijo in uporabo natančno preberite ta priročnik, da zagotovite pravilno delovanje in varnost. Priročnik shranite za poznejšo uporabo.

Ključne značilnosti:

• Wider Height Adjustment: Tri-stage legs offer a height range of 23.6 inches to 49.2 inches, suitable for users between 4'11" and 6'7" tall.
• Trdna in stabilna konstrukcija: Made from cold-rolled steel with 30% longer side plates, 40% thicker columns, and a double crossbeam, supporting up to 220 lbs.
• Zmogljiv brezkrtačni motor: Features an advanced brushless motor, lift-tested for 100,000 cycles, ensuring reliable and quiet operation (≤45 dB).
• Združljivost z namizjem: Adjustable crossbars accommodate desktops from 43.31 inches to 86.61 inches wide and 23.62 inches to 35.43 inches deep.
• Priročen nadzor: Includes a control panel with an LED display and four programmable memory height settings.

Image: The HUANUO 3-Stage Standing Desk Frame, showcasing njegovo elegantno obliko in robustno konstrukcijo.

2. Varnostne informacije

Vedno upoštevajte ta varnostna navodila, da preprečite poškodbe ali škodo na izdelku:

• Pred montažo in uporabo preberite vsa navodila.
• Ne prekoračite največje omejitve teže 220 lbs (100 kg).
• Keep the desk away from heat sources and direct sunlight.
• Do not place heavy objects on the desktop when adjusting the height.
• Med nastavljanjem višine se prepričajte, da na poti mize ni ovir.
• Always use both hands when manually adjusting the height (if applicable) or operating the control panel to prevent accidental movement.
• Med delovanjem naj se otroci in hišni ljubljenčki ne približujejo mizi.
• Uporabljajte samo priloženi napajalnik in kable.

3. Vsebina paketa

Pred začetkom montaže preverite, ali so vse komponente prisotne in nepoškodovane. Če kateri koli deli manjkajo ali so poškodovani, se obrnite na podporo strankam.

• Desk Legs (3-stage)
• Crossbeams (Double)
• Nadzorna škatla
• Nadzorna plošča z LED zaslonom
• Napajalnik in kabel
• Kabelske sponke (2)
• Headphone/Bag Hooks (2)
• Montažni material (vijaki, imbus ključi)
• Navodila za uporabo

Image: All components included with the HUANUO Standing Desk Frame, including legs, crossbeams, control panel, and accessories.

4. Navodila za montažo

Assembly is designed to be straightforward. Follow the numbered steps and refer to the included diagrams for visual guidance. A screwdriver is recommended for assembly.

1. Pripravite delovni prostor: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Pritrdite stopala na noge: Secure the feet to the bottom of each desk leg using the provided screws.
3. Assemble Crossbeams: Connect the double crossbeams between the two desk legs. Ensure they are properly aligned and tightened.
4. Namestitev krmilne omarice in motorja: Mount the control box and connect the motor cables according to the diagrams.
5. Priložite nadzorno ploščo: Secure the control panel to the desired location on the desk frame, typically on the front edge.
6. Mount Desktop (Sold Separately): Carefully place your chosen desktop onto the assembled frame. Align the desktop and secure it using the provided screws. Ensure screws do not penetrate through the desktop surface.
7. Organizirajte kable: Use the included cable clips to manage and secure all cables, preventing tangles and ensuring smooth operation. Attach the headphone/bag hooks as desired.

Image: The fully assembled HUANUO Standing Desk Frame, illustrating the double crossbeam structure and leg components.

5. Navodila za uporabo

Your HUANUO standing desk frame features an intuitive control panel for easy height adjustment and memory settings.

Funkcije nadzorne plošče:

• LED zaslon: Prikazuje trenutno višino mize v palcih.
• Puščice gor/dol (▲/▼): Pritisnite in držite za neprekinjeno nastavitev višine mize. Spustite, da se ustavite na želeni višini.
• Prednastavitve pomnilnika (1, 2, 3, 4): These buttons allow you to save and recall preferred height settings.

Nastavitev prednastavitev pomnilnika:

1. S puščicami gor/dol prilagodite mizo želeni višini.
2. Press the 'S' (Set) button once. The LED display will show 'S-'.
3. Within 3 seconds, press the desired memory button (1, 2, 3, or 4). The display will show the number, confirming the height is saved.

Priklic prednastavitev pomnilnika:

Simply press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

Image: Close-up of the control panel, showing the LED display, up/down arrows, and four memory preset buttons.

Ergonomic Height Guidance:

For optimal ergonomics, adjust the desk height so your elbows are bent at approximately 90 degrees when typing, whether sitting or standing. When standing, your feet should be shoulder-width apart, and your spine should maintain its natural curve.

Image: Diagram illustrating ideal ergonomic postures for sitting and standing, with recommended desk heights based on user height.

6. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in nemoteno delovanje vašega ogrodja za stoječo mizo.

• Čiščenje: Okvir obrišite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino.
• Upravljanje kablov: Periodically check cable connections and ensure they are securely routed and not pinched.
• Preverjanje pritrdilnih elementov: Every few months, inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• Preverjanje ovir: Regularly check for any objects that might obstruct the desk's movement path.

7. Odpravljanje težav

If you encounter issues with your standing desk frame, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact HUANUO customer support for further assistance.

8. Specifikacije

Detailed technical specifications for the HUANUO 3-Stage Standing Desk Frame (Model HNESD172B-US).

• Številka modela: HNESD172B-US
• Razpon višine: 23.6 palca - 49.2 palca
• Največja nosilnost: 220 lbs (100 kg)
• Noga Stages: 3-stage
• Vrsta motorja: Brezkrtačni motor
• Raven hrupa: ≤45 dB
• Desktop Width Compatibility: 43.31 palca - 86.61 palca
• Desktop Depth Compatibility: 23.62 palca - 35.43 palca
• Material okvirja: Hladno valjano jeklo
• barva: Črna
• Teža artikla: 43 funtov
• Vhodna moč: [Refer to power adapter label]

Image: Visual comparison of the height range offered by 3-stage legs (23.6"-49.2") versus 2-stage noge.

Image: Diagram illustrating the adjustable crossbar mechanism and compatible desktop dimensions (width and depth).

9. Garancija in podpora

The HUANUO 3-Stage Standing Desk Frame comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, warranty claims, or any questions regarding your product, please contact HUANUO customer service:

• Webspletno mesto: www.huanuo.com (Nprample, please refer to actual product documentation for correct contact information)
• E-pošta: support@huanuo.com (Example, please refer to actual product documentation for correct contact information)
• telefon: 1-800-XXX-XXXX (npr.ample, please refer to actual product documentation for correct contact information)

Please have your model number (HNESD172B-US) and purchase date ready when contacting support.