Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.

Varnostne informacije

• Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
• Preden ponovno vzpostavite napajanje, se prepričajte, da so vse povezave varne in pravilno usmerjene.
• This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
• Med delovanjem držite roke in ohlapna oblačila stran od gibljivih delov.
• Če ste glede katerega koli koraka negotovi, se posvetujte s kvalificiranim tehnikom.

Vsebina paketa

Paket vključuje naslednje elemente:

• 1 x Okin JLDQ.18.137.333D01 Refined Motor

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.

Konec izdelkaview

The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

Slika: Bližnji posnetek view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).

Vrste povezav:

• Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
• Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.

Slika: Podrobna view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.

Nastavitev in namestitev

This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.

1. Odklop napajanja: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
2. Dostop do motorja: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
3. Prepoznajte povezave: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
4. Odklopite stari motor: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
5. Odstranite stari motor: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
6. Namestitev novega motorja: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
7. Priključitev novega motorja:
   • Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
   • Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
8. Upravljanje kablov: Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
9. Obnovi moč: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
10. Testno delovanje: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.

Opomba: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.

Navodila za uporabo

After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.

• Press and hold the appropriate button on your hand control to recline or lift the chair.
• Spustite gumb, ko dosežete želeni položaj.
• Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.

Vzdrževanje

Proper maintenance ensures the longevity and reliable operation of your Okin motor.

• Čiščenje: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
• Pregled: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
• Mazanje: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
• Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.

Odpravljanje težav

If your recliner is not operating correctly after motor replacement, consider the following common issues:

Če koraki za odpravljanje težav ne odpravijo težave, se za dodatno pomoč obrnite na podporo strankam.

Specifikacije

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.

Garancija in podpora

For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's webspletnem mestu ali prek prodajalca vašega izdelka.

Za informacije o patentih obiščite dewertokin.com/patents.