ALONEFIRE H60

Uporabniški priročnik za LED svetilko ALONEFIRE H60

Model: H60

1. Končanoview in vsebino paketa

The ALONEFIRE H60 is a high-performance, rechargeable LED flashlight designed for various applications including camping, emergency situations, hiking, and home use. It features multiple lighting modes, a durable aluminum alloy body, and convenient USB-C charging.

Vsebina paketa:

  • ALONEFIRE H60 LED Flashlight
  • Polnilna litij-ionska baterija (vnaprej nameščena ali ločena)
  • Polnilni kabel USB-C
  • Vrvica
  • Pocket Clip (may be pre-attached)
ALONEFIRE H60 LED Flashlight with USB-C cable and lanyard

Image 1.1: The ALONEFIRE H60 LED Flashlight shown with its included USB-C charging cable and lanyard.

2. Nastavitev

2.1 Namestitev baterije

If the battery is not pre-installed, unscrew the tail cap of the flashlight. Insert the provided rechargeable Lithium-Ion battery with the positive (+) end facing towards the flashlight head. Screw the tail cap back on securely.

2.2 Začetno polnjenje

Before first use, fully charge the flashlight. Refer to the 'Charging' section for detailed instructions.

2.3 Pritrditev vrvice

Thread the thin loop of the lanyard through the small hole on the tail cap of the flashlight. Pass the larger end of the lanyard through the loop and pull to secure it. This helps prevent accidental drops.

Hand holding ALONEFIRE H60 flashlight with lanyard attached

Image 2.1: A hand demonstrating how to hold the ALONEFIRE H60 flashlight with the lanyard attached for secure carrying.

2.4 Pritrditev sponke za žep

The detachable pocket clip can be slid onto the flashlight body to allow for easy carrying on a belt, pocket, or backpack strap. Ensure it is firmly seated in the groove on the flashlight body.

Images showing the ALONEFIRE H60 flashlight with a detachable back clip, carried in a pocket and attached to a backpack

Image 2.2: The detachable back clip allows for convenient carrying in a pocket or attached to a backpack.

3. Delovanje

3.1 Vklop/izklop

  • Prižgati: Press the side power button once.
  • Izklopiti: Press and hold the side power button for approximately 1 second.

3.2 Changing Lighting Modes

With the flashlight on, press the side power button repeatedly to cycle through the 6 available lighting modes in the following order:

  1. Šibka svetloba
  2. Nizka svetloba
  3. Srednje svetlo
  4. Visoka svetloba
  5. Extreme Bright Light (Ultra Bright)
  6. Stroboskop
Graphic illustrating the 6 lighting modes of the ALONEFIRE H60 flashlight: Weak, Low, Medium, High, Ultra Bright, and Strobe

Image 3.1: Visual representation of the six distinct lighting modes available on the ALONEFIRE H60 flashlight.

3.3 Strobe Mode Activation

From any lighting mode, quickly double-click the side power button to activate Strobe mode. Press the button once more to return to the previous mode.

3.4 Automatic Brightness Adjustment

To prevent overheating and protect the LED, the two brightest modes (High Light and Extreme Bright Light) will automatically dim to a lower setting after a short period of continuous use (typically less than 1 minute for Extreme Bright). This is a normal function to ensure product longevity and safety.

3.5 Magnetic Tail Feature

The ALONEFIRE H60 features a powerful magnet integrated into its tail cap. This allows the flashlight to be securely attached to ferrous metal surfaces, providing hands-free illumination. This is useful for tasks requiring both hands, such as vehicle maintenance or working in dark spaces.

ALONEFIRE H60 flashlight attached to a metal surface using its tail magnet, with an inset showing the tail magnet and side metal pen clip

Image 3.2: The strong tail magnet allows the flashlight to adhere to metal surfaces, providing hands-free lighting.

4. Polnjenje

4.1 vrata za polnjenje USB-C

The ALONEFIRE H60 is equipped with a USB-C charging port for convenient recharging. To access the charging port, twist the upper ring of the flashlight head to expose the port. This design helps protect the port from dust and water when not in use.

4.2 Postopek polnjenja

  1. Twist the upper ring of the flashlight head to reveal the USB-C port.
  2. Connect the provided USB-C cable to the flashlight's port.
  3. Drugi konec kabla USB-C priključite na združljiv vir napajanja USB (npr. stenski adapter, vrata USB računalnika, prenosna baterija).
  4. The charging indicator light will illuminate to show the charging status.
  5. Once charging is complete, disconnect the cable and twist the upper ring back to cover the port.

4.3 Indikator polnjenja

  • Rdeča luč: Označuje, da se svetilka trenutno polni.
  • Modra svetloba: Indicates the flashlight is fully charged.

Charging time typically ranges from 2 to 4 hours, depending on the power source and remaining battery level.

ALONEFIRE H60 flashlight connected to a USB-C charging cable, showing red and blue indicator lights for charging status

Image 4.1: The ALONEFIRE H60 flashlight during USB-C charging, illustrating the red (charging) and blue (fully charged) indicator lights.

5. Vzdrževanje

5.1 Čiščenje

Ohišje svetilke obrišite z mehko krpoamp cloth. Do not use abrasive cleaners or solvents, as these may damage the anodized aluminum finish. Keep the lens clean for optimal light output.

5.2 Skrb za baterije

  • To prolong battery life, avoid completely draining the battery. Recharge the flashlight when the light becomes noticeably dim.
  • If storing the flashlight for an extended period, charge the battery to approximately 50% and recharge every 3-6 months to prevent over-discharge and battery damage.
  • Use only the specified Lithium-Ion battery.

5.3 Mazanje O-tesnila

Periodically inspect the O-rings (seals) on the tail cap and charging port area. If they appear dry or cracked, apply a thin layer of silicone grease to maintain the flashlight's waterproof rating.

6. Odpravljanje težav

  • Svetilka se ne vklopi:
    • Prepričajte se, da je baterija pravilno nameščena s pozitivnim (+) koncem obrnjenim proti glavi.
    • Preverite, ali je baterija napolnjena. Priključite jo na polnilnik in opazujte indikatorsko lučko.
    • Ensure the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
  • Luč se nepričakovano zatemni:
    • This is a normal function for the High and Extreme Bright modes to prevent overheating. The flashlight will automatically reduce output to a sustainable level.
    • Baterija je morda skoraj prazna. Napolnite svetilko.
  • Svetilka se med uporabo segreje:
    • It is normal for the flashlight head to become warm, especially on higher brightness settings, due to heat dissipation from the LED. Avoid touching the head directly when operating on the brightest modes for extended periods.
  • Charging indicator light does not change:
    • Prepričajte se, da je kabel USB-C popolnoma vstavljen tako v svetilko kot v vir napajanja.
    • Poskusite z drugim kablom USB-C ali napajalnikom.
    • Verify the charging port on the flashlight is clean and free of debris.

7. Specifikacije

ModelH60
Vir svetlobeLED iz nerjavečega jekla40
SvetlostDo 1800 Lumens
Načini osvetlitve6 (Weak, Low, Medium, High, Extreme Bright, Strobe)
Največja razdalja žarkaDo 272 metre
Vir napajanja1x Lithium-Ion Battery (included)
Vrata za polnjenjeUSB-C
Čas polnjenja2-4 ur
Življenjska doba baterije2–10 ur (odvisno od načina)
MaterialAnodiziran aluminij
VodoodpornostVodotesen
Teža predmeta0.16 kg (5.6 unč)
Dimenzije6.34 x 2.32 x 1.73 palcev (približno)
Posebne lastnostiAdjustable Light Modes, High Lumens, Long Range, Rechargeable, Strong Tail Magnet

8. Garancija in podpora

8.1 Informacije o garanciji

Specific warranty details for your ALONEFIRE H60 flashlight are typically provided with your purchase documentation or can be found on the official ALONEFIRE webspletnega mesta. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

8.2 Podpora strankam

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ALONEFIRE customer support through their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen.

© 2025 ALONEFIRE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.