Jauarta QS-WK16026 Digital Temperature Controller

1. Uvod

This manual provides comprehensive instructions for the safe and efficient operation of your Jauarta QS-WK16026 Digital Temperature Controller. This intelligent thermostat is designed for precise temperature regulation across a wide voltage range (AC 110-240V), suitable for various applications requiring stable temperature control.

Slika 1: Spredaj view of the Jauarta QS-WK16026 Digital Temperature Controller.

2. Varnostne informacije

Please read and understand all safety instructions before using this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Prepričajte se, da je napajalnik voltage matches the device's specified range (AC 110-240V).
• Naprave ne uporabljajte z mokrimi rokami ali damp okoljih.
• Naprave ne razstavljajte ali spreminjajte. Vsa servisna dela prepustite usposobljenemu osebju.
• Keep the device away from water, direct sunlight, and extreme temperatures.
• Zagotovite ustrezno prezračevanje okoli naprave.
• The ABS housing provides strong insulation; however, always handle with care to prevent damage.

3. Izdelek je končanview

The Jauarta QS-WK16026 features an intuitive display and control buttons for easy temperature management.

Slika 2: Bližnji posnetek view of the display and control panel.

Sestavine:

• LED Digital Tube Display: Shows actual temperature (red), set start temperature (left yellow), and set stop temperature (right yellow).
• Start Setting Buttons: Up/Down arrows to adjust the desired start temperature.
• Stop Setting Buttons: Up/Down arrows to adjust the desired stop temperature.
• Lučka stanja: Indicates device operation (red light on = working, red light off = stopped).
• Vtičnica: For connecting the heating or cooling device.
• Temperaturna sonda: For accurate temperature measurement.

4. Specifikacije

5. Nastavitev

Follow these steps to set up your temperature controller:

1. Priključite temperaturno sondo: Insert the temperature probe into the designated port on the controller. Ensure it is securely connected.
2. Položaj sonde: Place the temperature probe in the area where you wish to measure and control the temperature (e.g., fish tank, greenhouse).
3. Priključite napravo: Connect the temperature controller's power plug into a suitable AC 110-240V power outlet.
4. Connect Heating/Cooling Appliance: Plug your heating or cooling appliance (e.g., heater, fan) into the power outlet on the temperature controller.

Figure 3: Temperature controller with power cord and probe connected.

6. Navodila za uporabo

Razumevanje zaslona:

• The red digital tube in the middle displays the current actual temperature measured by the probe.
• The left yellow digital tube displays the set začetek temperaturo.
• The right yellow digital tube displays the set stop temperaturo.
• The red status light indicates when the connected appliance is active (on) or inactive (off).

Nastavitev temperatur:

The controller operates in either heating or cooling mode based on the relationship between the set start and stop temperatures.

1. Nastavitev začetne temperature: Use the "Start Setting" up/down arrow buttons to adjust the desired temperature at which the connected appliance should activate.
2. Nastavitev temperature zaustavitve: Use the "Stop Setting" up/down arrow buttons to adjust the desired temperature at which the connected appliance should deactivate.

Načini delovanja:

• Način ogrevanja: Če je Start Temperature je nastavljeno spodaj the Stop Temperatura, the controller will operate in heating mode. The appliance will turn on when the actual temperature drops below the set start temperature and turn off when it reaches the set stop temperature.
• Način hlajenja: Če je Start Temperature je nastavljeno zgoraj the Stop Temperatura, the controller will operate in cooling mode. The appliance will turn on when the actual temperature rises above the set start temperature and turn off when it drops to the set stop temperature.

Kalibracija temperature:

The device supports temperature calibration within a range of ±9℃. Specific instructions for calibration are not provided in this manual. If precise calibration is required, please contact customer support for detailed guidance.

7. Vzdrževanje

• Čiščenje: Napravo obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Shranjevanje: Napravo shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur, ko je ne uporabljate.
• Skrb za sondo: Ensure the temperature probe is kept clean and free from debris for accurate readings. Avoid bending or damaging the probe cable.

8. Odpravljanje težav

If you encounter issues with your temperature controller, refer to the following common troubleshooting steps:

• Naprava se ne vklopi:
  • Check if the power plug is securely inserted into a live power outlet.
  • Preverite, ali vtičnica deluje pravilno.
• Appliance Not Activating/Deactivating:
  • Ensure the appliance is correctly plugged into the controller's outlet and is powered on.
  • Check if the set start and stop temperatures are appropriate for your desired heating or cooling mode.
  • Verify that the temperature probe is properly connected and positioned.
• Netočne odčitke temperature:
  • Ensure the temperature probe is clean and undamaged.
  • Verify the probe is fully immersed or positioned correctly in the environment being measured.
  • Consider if temperature calibration is needed (refer to Section 6).

Če težave po poskusu teh korakov ne izginejo, se obrnite na podporo strankam.

9. Garancija in podpora

Za informacije o garanciji ali tehnično podporo glejte embalažo izdelka ali se obrnite neposredno na proizvajalca. Račun shranite kot dokazilo o nakupu.