Uporabniški priročnik za DOREMiDi FC-ONE MIDI nožni pedal

1. Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your DOREMiDi FC-ONE MIDI Foot Pedal Controller. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device. The FC-ONE is designed to provide versatile MIDI control for various musical applications, offering customizable messages and multiple trigger modes.

2. Izdelek je končanview

2.1 Ključne lastnosti

• Supports custom MIDI messages, including CC (Control Change), PC (Program Change), and NOTE messages.
• Capable of sending up to 16 independent MIDI messages simultaneously.
• Features multiple trigger modes: Single, Toggle, Reset, Increase, and Decrease.
• Equipped with MIDI DIN, USB Device, and USB HOST outputs for broad compatibility.
• Compact design, requiring minimal space on a pedalboard.

2.2 Vsebina paketa

2.3 Postavitev naprave

Familiarize yourself with the various ports and controls on your FC-ONE controller:

3. Nastavitev

3.1 Napajalni priključek

Connect a standard 9V DC power adapter (center negative) to the DC 9V input port (1) on the right side of the FC-ONE. Ensure the power supply meets the specified voltage and polarity requirements to prevent damage to the device.

3.2 MIDI in USB povezave

The FC-ONE offers multiple connectivity options:

• MIDI OUT (2): Use the included MIDI DIN adapter cable to connect the 3.5mm MIDI OUT jack to the MIDI IN port of your MIDI-compatible device (e.g., synthesizer, effects processor).
• Vrata USB (3): This port functions as both a USB Device and a USB Host.
• USB Device Mode: Connect the FC-ONE to a computer (PC) using a USB cable. This allows the computer to recognize the FC-ONE as a MIDI controller and enables configuration via the software.
• USB Host Mode: Connect a USB MIDI device (e.g., a small MIDI keyboard or controller) to the FC-ONE's USB port. The FC-ONE will then act as a host, allowing the connected device to send MIDI data through the FC-ONE's MIDI OUT or to another USB device connected to the FC-ONE.

3.3 Software Installation (Pedal Config Tool)

To unlock the full customization capabilities of the FC-ONE, you will need to install the DOREMiDi Pedal Config Tool software on your computer. This software allows you to define custom MIDI messages and trigger modes for the foot pedal.

• Download the latest version of the Pedal Config Tool from the official DOREMiDi webmesto.
• Follow the on-screen instructions for installation. It is crucial to read all prompts carefully during the installation process to ensure all necessary drivers are correctly installed.
• Connect the FC-ONE to your computer via the USB port (3) before launching the software.

4. Navodila za uporabo

4.1 Basic Pedal Operation

The main foot switch (5) on the FC-ONE is used to trigger MIDI messages. The behavior of the pedal depends on the configured trigger mode.

4.2 Načini proženja

The FC-ONE supports the following trigger modes, configurable via the Pedal Config Tool:

• samski: Sends a MIDI message once per press.
• Preklopi: Alternates between two MIDI messages (e.g., On/Off) with successive presses.
• Ponastaviti: Resets a parameter to a default value.
• Povečanje: Increments a MIDI value with each press.
• Zmanjšanje: Decrements a MIDI value with each press.

4.3 RGB Mode Indicator

The RGB LED indicator (6) provides visual feedback on the current operating mode:

• Red (R): Indicates USB Host mode.
• Green (G): Indicates USB Device mode.
• Blue (B): Indicates Data Out mode (MIDI DIN output).

4.4 Using the Pedal Config Tool

The Pedal Config Tool software is essential for customizing the FC-ONE's behavior:

• Launch the software after connecting the FC-ONE via USB.
• The interface allows you to select the pedal number, pedal type (e.g., Switch, Expression), and MIDI channel.
• You can define specific MIDI messages (Status, Data1, Data2) for each trigger event.
• Save your configurations to the device or to a file na vašem računalniku.

5. Vzdrževanje

To ensure the longevity and optimal performance of your DOREMiDi FC-ONE, follow these maintenance guidelines:

• Čiščenje: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Shranjevanje: Napravo shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Ravnanje: Pazite, da vam naprava ne pade ali da je ne izpostavljate močnim udarcem. Ne poskušajte razstaviti naprave, saj boste s tem razveljavili garancijo.
• Povezljivost: Periodically check all cables and connections for wear or damage. Ensure connections are secure during use.

6. Odpravljanje težav

If you encounter issues with your FC-ONE, refer to the following troubleshooting steps:

6.1 Ni napajanja/Indikatorska lučka ne sveti

• Prepričajte se, da je 9V DC napajalnik pravilno priključen in deluje.
• Preverite, ali je vtičnica aktivna.

6.2 Software Driver Installation Issues

Some users have reported difficulties with software driver installation. If you experience incomplete driver icons or installation failures:

• Carefully re-read the installation instructions provided with the Pedal Config Tool.
• Ensure your operating system is compatible with the software.
• Temporarily disable antivirus software during installation, if necessary, and re-enable it afterward.
• Try downloading the driver again from the official DOREMiDi website to ensure the file ni poškodovan.
• Consult the DOREMiDi support resources for specific driver troubleshooting.

6.3 No MIDI Output

• Check all MIDI and USB cable connections. Ensure they are securely plugged in.
• Verify that the FC-ONE is receiving power (RGB LED should be lit).
• Confirm that the connected MIDI device (e.g., synthesizer, DAW) is correctly configured to receive MIDI input from the FC-ONE.
• Use the Pedal Config Tool to ensure that MIDI messages are correctly assigned to the foot pedal and that the desired trigger mode is active.
• Check the RGB LED indicator to confirm the correct mode (e.g., Green for USB Device, Blue for Data Out).

6.4 Incorrect MIDI Messages Sent

• Connect the FC-ONE to the Pedal Config Tool and review your custom MIDI message settings.
• Ensure the correct MIDI channel, CC/PC/NOTE values, and trigger modes are selected for your application.

7. Specifikacije

8. Garancija in podpora

DOREMiDi products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official DOREMiDi website. If you require technical assistance or have questions not covered in this manual, please contact DOREMiDi customer support through their official channels.