Jauarta Industrial Borescope T21 5.5mm 1m Instruction Manual

1. Uvod

Thank you for choosing the Jauarta Industrial Borescope T21 5.5mm 1m. This digital endoscope is designed for detailed visual inspection in hard-to-reach areas, featuring a 4.5-inch IPS HD screen, a 5.5mm diameter lens with LED illumination, and an IP67 waterproof rating. Please read this manual carefully before operating the device to ensure proper use and maintenance.

2. Varnostne informacije

• Naprave ne poskušajte razstavljati ali spreminjati. Nepooblaščene spremembe lahko povzročijo okvaro in razveljavijo garancijo.
• Napravo hranite stran od ekstremnih temperatur, neposredne sončne svetlobe in korozivnih tekočin.
• Ensure the USB port cover is securely closed when operating the camera probe in wet environments to maintain IP67 water resistance for the probe. The main unit is not waterproof.
• Za polnjenje uporabljajte samo priloženi kabel USB.
• Store the device and accessories out of reach of children.
• Baterijo in napravo zavrzite v skladu z lokalnimi predpisi.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 1 x Industrial Borescope (Main Unit with 4.5 Inch IPS HD Display)
• 1 x Camera Probe (5.5mm lens, 1m cable)
• 1 x Cap for lens protection
• 1 x Small Storage Box
• 1 x USB kabel
• 1 x uporabniški priročnik
• 1 x Hook Accessory
• 1 x Magnetic Suction Accessory
• 1 x Side Lens (Mirror)

Opomba: A small memory card is not included and must be purchased separately for photo and video storage.

Image: The Jauarta Industrial Borescope main unit displayed alongside its accessories, including the camera probe, USB cable, hook, magnetic suction, and side mirror attachments.

4. Izdelek je končanview

The Jauarta Industrial Borescope consists of a main display unit and a flexible camera probe. The main unit features a 4.5-inch IPS HD screen for clear viewing and control buttons for navigation, photo/video capture, and LED light adjustment. The camera probe is equipped with a 5.5mm lens and 6 adjustable LED lights.

Slika: spredaj view of the Jauarta Industrial Borescope, showing the 4.5-inch IPS HD screen and control buttons below it.

Slika: Bližnji posnetek view of the USB charging port located on the side of the borescope's main unit.

5. Nastavitev

5.1 Polnjenje naprave

1. Connect the provided USB cable to the charging port on the borescope's main unit.
2. Drugi konec kabla USB priključite v standardni napajalnik USB (ni priložen) ali v vrata USB računalnika.
3. Indikator polnjenja bo zasvetil. Pred prvo uporabo pustite, da se naprava popolnoma napolni.

5.2 Vstavljanje pomnilniške kartice

To save photos and videos, a small memory card (MicroSD card) is required (not included).

1. Locate the memory card slot on the side of the main unit.
2. Gently insert the MicroSD card into the slot with the contacts facing down until it clicks into place.
3. Za odstranitev kartico rahlo potisnite navznoter, dokler ne izskoči.

5.3 Pritrjevanje dodatkov

The hook, magnetic suction, and side lens accessories can be attached to the tip of the camera probe for specific inspection needs.

1. Ensure the camera probe is clean and dry.
2. Carefully slide the desired accessory onto the tip of the 5.5mm camera lens until it is securely fitted.
3. The side lens (mirror) is useful for viewing objects at a 90-degree angle.

6. Navodila za uporabo

6.1 Vklop/izklop

• Za vklop: Pritisnite in držite gumb za vklop (običajno označen s simbolom »V redu« ali vklop) nekaj sekund, dokler se zaslon ne prižge.
• Za izklop: Ponovno pritisnite in držite gumb za vklop, dokler se zaslon ne izklopi.

6.2 Navigacija po meniju

The device features several control buttons:

• OK/Power Button: Powers the device on/off, confirms selections.
• Up/Zoom In Button: Navigates up in menus, zooms in during live view.
• Down/Zoom Out Button: Navigates down in menus, zooms out during live view.
• Gumb za način fotografiranja/videoposnetka: Switches between photo and video capture modes.
• LED Light Adjustment Button: Adjusts the brightness of the camera probe's LED lights.
• Gumb za meni/vrnitev: Dostopi do glavnega menija ali se vrne na prejšnji zaslon.

6.3 Fotografiranje in snemanje videoposnetkov

1. Power on the device. The live view from the camera probe will appear on the screen.
2. Pritisnite Photo/Video Mode Button to select either photo or video mode. An icon on the screen will indicate the current mode.
3. V načinu fotografiranja pritisnite Gumb OK za zajem mirujoče slike.
4. V video načinu pritisnite Gumb OK once to start recording, and press it again to stop recording.
5. All captured media will be saved to the inserted memory card.

6.4 Adjusting LED Light Brightness

Sonda s kamero ima 6 nastavljivih LED lučk za osvetlitev temnih območij pregleda.

• Med živo view, pritisnite LED Light Adjustment Button repeatedly to cycle through different brightness levels.
• Select the brightness level that provides the clearest image for your inspection.

6.5 Using the IP67 Waterproof Probe

The camera probe is IP67 rated, allowing it to be submerged in water up to 1 meter for a limited time. The main unit is ne nepremočljiva.

• Ensure the connection between the camera probe and the main unit is secure.
• After use in wet conditions, clean and dry the probe thoroughly before storage.

7. Vzdrževanje

7.1 Čiščenje

• Glavna enota: Wipe the screen and body with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Sonda kamere: After use, especially in dirty or wet environments, gently wipe the lens and cable with a soft, damp krpo. Pred shranjevanjem se prepričajte, da je popolnoma suha.
• Objektiv: Za trdovratno umazanijo na leči uporabite čistilno raztopino za leče in krpo iz mikrovlaken.

7.2 Shranjevanje

• Store the borescope and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
• If not used for an extended period, charge the device periodically (e.g., every 3 months) to maintain battery health.
• Keep the camera probe cable neatly coiled to prevent kinks or damage.

8. Odpravljanje težav

Slika: Zadaj view of the Jauarta Industrial Borescope, highlighting the 'RESET' pinhole.

9. Specifikacije

10. Garancija in podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Jauarta customer service directly. Keep your purchase receipt as proof of purchase.