ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. Uvod

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

Slika: Konecview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Značilnosti izdelka

Prostoročno upravljanje: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
Univerzalna združljivost: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
Enostavna namestitev: Fits standard junction boxes and requires a neutral wire.
Trajna zasnova: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

Slika: Podrobna view of the product features and adjustable settings on the dimmer switch.

3. Varnostne informacije

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

Ta naprava je namenjena za namestitev v skladu z nacionalnim električnim kodeksom in lokalnimi predpisi.
Priporočljivo je, da to namestitev izvede usposobljen električar.
Uporabljajte samo bakrene žice.
A neutral wire is required for proper operation.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Vsebina paketa

ECOELER Motion Sensor Dimmer Switch
Stenska plošča
Navodila za namestitev (ta priročnik)
Montažni vijaki
Pokrovčki za ožičenje

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Slika: Dimenzije izdelka in priložena dodatna oprema.

5. Specifikacije

Atribut	Vrednost
Številka modela	YM2601-WH
Delovna zvezatage	120 voltov (AC)
Trenutna ocena	10 Amps
Max Wattage (zatemnljiva LED/CFL)	150 W
Max Wattage (žarnica z žarilno nitko/halogenska žarnica)	300 W
Tip stikala	Enopolni (enosmerni)
Vrsta namestitve	Stenski nosilec
Material	Copper, Metal, Polycarbonate
Dimenzije (D x Š x V)	6.86 x 4.2 x 11.48 cm
Certifikati	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage ocene.

Image: Universal compatibility with various bulb types and their wattage ocene.

6. Namestitev

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Predhodna namestitev

Izklopite napajanje: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage tester.
Odstranite staro stikalo: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
Prepoznajte žice: Identify the following wires in your electrical box:
- Hot (Line) Wire: Prenaša napajanje iz odklopnika.
- Žica za obremenitev: Povezuje se s svetilko.
- Nevtralna žica: (Required) Typically white, often capped together with other neutral wires.
- Ozemljitvena žica: (Recommended) Typically bare copper or green.

6.2 Navodila za ožičenje

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

Povežite Črna wire from the switch to the Hot (Line) wire from the wall.
Povežite Rdeča wire from the switch to the obremenitev wire from the wall.
Povežite Bela wire from the switch to the Nevtralno wire from the wall.
Povežite zelena wire from the switch to the Tla wire from the wall.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
Pritrdite stensko ploščo.
Ponovno vklopite napajanje na odklopniku.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. Navodila za uporabo

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

Occupancy Mode (Auto ON, Auto OFF): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
Vacancy Mode (Manual ON, Auto OFF): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 Prilagajanje nastavitev

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

Časovni zamik: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
Občutljivost: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 Funkcija zatemnitve

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. Odpravljanje težav

Luči se ne prižgejo:
- Prepričajte se, da je napajanje na odklopniku VKLOPLJENO.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- Preverite skupno porabotage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. Vzdrževanje

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

Čiščenje: Wipe the switch and wall plate with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
Izogibajte se oviram: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
Redni pregledi: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. Garancija in podpora

The ECOELER Motion Sensor Dimmer Switch comes with a 1-letna garancija, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

Proizvajalec: ECOELER ELECTRIC INC

Kontakt: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.