Amazon Basics Corded Steam Iron EC3016C-PE User Manual

Uvod

Hvala za nakupasing the Amazon Basics Corded Steam Iron. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and retain them for future reference.

Pomembna varnostna navodila

Pri uporabi električnih naprav je treba vedno upoštevati osnovne varnostne ukrepe, da zmanjšate nevarnost požara, električnega udara in telesnih poškodb.

• Pred uporabo likalnika preberite vsa navodila.
• Likalnik uporabljajte samo za predvideno uporabo.
• Da bi se izognili nevarnosti električnega udara, likalnika ne potapljajte v vodo ali druge tekočine.
• Preden vtič priključite ali izključite iz električne vtičnice, likalnik vedno IZKLOPITE. Nikoli ne vlecite za kabel, da bi ga izključili iz vtičnice; namesto tega primite vtič in ga povlecite, da ga izključite.
• Do not allow cord to touch hot surfaces. Let the iron cool completely before putting away. Loop cord loosely around iron when storing.
• Likalnik vedno izklopite iz električne vtičnice, ko ga polnite z vodo ali praznite in kadar ga ne uporabljate.
• Ne uporabljajte likalnika s poškodovanim kablom ali če je likalnik padel ali je bil poškodovan. Da bi se izognili nevarnosti električnega udara, likalnika ne razstavljajte; odnesite ga k usposobljenemu serviserju na pregled in popravilo. Nepravilna ponovna montaža lahko povzroči nevarnost električnega udara med uporabo likalnika.
• Za vsako napravo, ki jo uporabljajo otroci ali v njihovi bližini, je potreben natančen nadzor. Likalnika ne puščajte brez nadzora, ko je priključen ali na likalni deski.
• Opekline lahko nastanejo zaradi dotika vročih kovinskih delov, vroče vode ali pare. Bodite previdni, ko obračate parni likalnik na glavo - v rezervoarju je lahko vroča voda.
• Likalnik je treba uporabljati in ga postaviti na stabilno površino.
• Ko postavite likalnik na stojalo, se prepričajte, da je površina, na katero stoji stojalo, stabilna.

Konec izdelkaview

Familiarize yourself with the components of your steam iron.

Slika: Stran view of the Amazon Basics Corded Steam Iron, showing its overall design and handle.

1. Likalna plošča: Nelepljiva površina za gladko drsenje.
2. Rezervoar za vodo: Transparent reservoir with 200ml capacity for steam and spray functions.
3. Dovod vode: Opening for filling the water tank.
4. Razpršilna šoba: Oddaja fino vodno meglico.
5. Gumb za pršenje: Aktivira funkcijo pršenja.
6. Gumb za upravljanje pare: Prilagodi izpust pare ali izbere suho likanje.
7. Regulator temperature: Selects the appropriate temperature for different fabric types.
8. Indikator napajanja: Lučka sveti, ko se likalnik segreva, in ugasne, ko je dosežena nastavljena temperatura.
9. Ročaj: Ergonomsko oblikovan za udoben oprijem.
10. Napajalni kabel: Priključi likalnik na električno vtičnico.

Slika: Bližnji posnetek view of the iron's control panel, showing the temperature dial and steam/spray buttons.

Nastavitev

Razpakiranje

• Remove the iron from its packaging.
• Z likalne plošče odstranite vse nalepke ali zaščitno folijo.
• Preverite likalnik za morebitne poškodbe. Ne uporabljajte ga, če je poškodovan.

Pred prvo uporabo

It is recommended to clean the soleplate and test the iron on an old piece of fabric before ironing your garments.

1. Fill the water tank (see "Filling the Water Tank" section).
2. Set the temperature to MAX and allow the iron to heat up.
3. Iron an old cloth for a few minutes to remove any manufacturing residues.
4. Empty the water tank after this initial cleaning.

Navodila za uporabo

Polnjenje rezervoarja za vodo

• Prepričajte se, da je likalnik izklopljen iz električne vtičnice.
• Set the steam control dial to the "Dry Ironing" position.
• Odprite pokrov dovoda vode.
• Using a measuring cup, carefully pour clean tap water into the water tank up to the MAX fill line (200ml capacity). Do not overfill.
• Dobro zaprite pokrov dovoda vode.

Image: The iron positioned to show the transparent water tank, indicating where water is filled.

Nastavitve temperature

• Check the fabric care label on your garment.
• Likalnik priključite v primerno električno vtičnico.
• Turn the temperature control dial to the desired setting. The power indicator light will illuminate.
• Wait for the indicator light to turn off, indicating the iron has reached the selected temperature (approx. 1 minute heat-up time).
• Za občutljive tkanine vedno začnite z nižjimi temperaturami in jih po potrebi zvišujte.

Suho likanje

• Ensure the water tank is empty or the steam control dial is set to the "Dry Ironing" position.
• Izberite ustrezno temperaturo za vašo tkanino.
• Once the indicator light turns off, begin ironing.

Parno likanje

• Napolnite rezervoar za vodo.
• Set the temperature control dial to the steam range (usually indicated by steam symbols on the dial).
• Once the indicator light turns off, turn the steam control dial to the desired steam output.
• For a burst of steam, press the steam burst button. This is useful for stubborn wrinkles.
• The iron provides a stable steam output of 20g per minute.

Funkcija razpršila

• The spray function can be used with or without steam.
• Press the spray button to emit a fine mist of water onto the fabric, helping to dampen and relax wrinkles.

Funkcija proti kapljanju

This iron is equipped with an anti-drip system that prevents water from dripping from the soleplate when the iron is not hot enough for steam production. This helps protect delicate fabrics from water spots.

Samodejni izklop

For safety, the iron features an automatic shut-off function. If left unattended in a horizontal position for a certain period (e.g., 30 seconds) or in a vertical position (e.g., 8 minutes), the heating element will automatically turn off. The indicator light will flash to signal this. To reactivate, simply move the iron.

Vzdrževanje in čiščenje

Po vsaki uporabi

• Izključite likalnik iz električne vtičnice.
• Pustite, da se likalnik popolnoma ohladi.
• Preostalo vodo iz rezervoarja izpraznite tako, da odprete dovod vode in likalnik nagnete nad umivalnik.

Čiščenje likalne plošče

Slika: Spodnja stran view of the iron, highlighting the soleplate with its steam vents.

• Za čiščenje likalne plošče jo obrišite zamp krpo in neabrazivnim čistilom.
• Do not use abrasive scouring pads or harsh cleaners as they can damage the non-stick coating.
• If starch or other residue builds up on the soleplate, wipe it with a cloth dipped in a mild vinegar solution while the iron is cool.

Shranjevanje

• Ensure the iron is completely cool and empty of water.
• Likalnik shranjujte pokonci na naslonjalu za nogo, da zaščitite likalno ploščo.
• Store in a dry, safe place, out of reach of children.

Odpravljanje težav

Specifikacije

Garancija in podpora

This product is covered by the Amazon Basics warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the Amazon Basics website. For customer support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon customer service through your Amazon account or the official Amazon Basics support channels.