Memorex MX-PS1501 15-Inch PA Speaker Instruction Manual

Uvod

Hvala za nakupasing the Memorex MX-PS1501 15-Inch PA Speaker. This manual provides essential information for the safe and efficient operation of your new speaker. Please read this manual thoroughly before use and retain it for future reference.

Slika: spredaj view of the Memorex MX-PS1501 PA Speaker, showcasing its translucent cabinet and dynamic LED lighting around the woofer.

Varnostne informacije

OPOZORILO: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not open the cabinet. Refer servicing to qualified personnel only.

POZOR: For continued protection against risk of fire, replace with the same type and value fuse indicated on the product. Refer to qualified service personnel for replacement.

• Pred uporabo naprave preberite vsa navodila.
• Ta navodila shranite za prihodnjo uporabo.
• Upoštevajte vsa opozorila na napravi in ​​v navodilih za uporabo.
• Sledite vsem navodilom.
• Te naprave ne uporabljajte v bližini vode.
• Čistite samo s suho krpo.
• Ne blokirajte prezračevalnih odprtin. Namestite v skladu z navodili proizvajalca.
• Ne nameščajte v bližini virov toplote, kot so radiatorji, grelniki, peči ali druge naprave (vključno z amplifiers), ki proizvajajo toploto.
• Ne izničite varnostnega namena polariziranega ali ozemljenega vtiča. Polarizirani vtič ima dve rezili, od katerih je ena širša od druge. Ozemljeni vtič ima dve rezili in tretji ozemljitveni vtič. Široko rezilo ali tretji zatič sta na voljo za vašo varnost. Če priloženi vtič ne ustreza vaši vtičnici, se obrnite na električarja za zamenjavo zastarele vtičnice.
• Zaščitite napajalni kabel, da se po njem ne pohodi ali stisne, zlasti pri vtičih, vtičnicah in na mestu, kjer izstopa iz naprave.
• Uporabljajte samo priključke/dodatke, ki jih je določil proizvajalec.
• Uporabljajte samo z vozičkom, stojalom, trinožnikom, nosilcem ali mizo, ki jih določi proizvajalec ali se prodajajo skupaj z napravo. Ko uporabljate voziček, bodite previdni pri premikanju kombinacije vozička/naprave, da preprečite poškodbe zaradi prevrnitve.
• Izklopite napravo med nevihtami ali ko je dlje časa ne uporabljate.
• Za vse servise se obrnite na usposobljeno servisno osebje. Servis je potreben, če je bil aparat kakor koli poškodovan, na primer poškodovan je napajalni kabel ali vtič, je bila polita tekočina ali so v aparat padli predmeti, je bil aparat izpostavljen dežju ali vlagi, ne deluje normalno , ali je bil opuščen.

Vsebina paketa

Ob razpakiranju se prepričajte, da so prisotni vsi predmeti:

• Memorex MX-PS1501 PA Speaker
• Stojalo za zvočnik
• Žični mikrofon
• Napajalni kabel
• Vodnik za hiter začetek (za podrobna navodila glejte ta priročnik)

Konec izdelkaviewKontrole in funkcije

Familiarize yourself with the control panel and various inputs/outputs of your MX-PS1501 speaker.

Image: Rear control panel of the Memorex MX-PS1501 speaker, showing all inputs, outputs, and control knobs.

1. DSP Preset Select (4 Modes): Cycle through different Digital Signal Processing presets (e.g., Standard, Live, Monitor, Vocal) to optimize sound for various applications.
2. DSP Monitor: Display for current DSP mode and Bluetooth status.
3. USB reža: Za predvajanje zvoka vstavite pogon USB.
4. Control Panel (TWS/Bluetooth/Volume+/-/Next Song/Play/Pause): Buttons for media control, Bluetooth functions, and TWS pairing.
5. Gumb za bas: Prilagodi nizkofrekvenčni izhod.
6. Bluetooth gumb za glasnost: Controls the volume of Bluetooth audio input.
7. Mic Line Input Volume Knob: Adjusts the volume for microphone and line inputs.
8. Mic Line Input Volume Knob: (Duplicate label in image, likely for a second input or a master mic/line volume)
9. Visokotonski gumb: Prilagodi visokofrekvenčni izhod.
10. Mic/Line XLR Input: Connect microphones or line-level audio sources using an XLR cable.
11. Mic/Line XLR Input: (Duplicate label in image, likely a second XLR input)
12. Aux 3.5mm Input / RCA Input: Connect external audio devices via 3.5mm or RCA cables.
13. Mix XLR Output: Izhod za povezavo z drugim zvočnikom ali avdio sistemom.
14. LED Switch Mode Button: Cycles through different LED lighting modes or turns them off.
15. Stikalo za izmenični tok: Turns the speaker power ON or OFF.
16. AC 110/230V Voltage Stikalo: Selects the appropriate voltage za vašo regijo. Ensure this is set correctly before powering on.
17. AC Power Connect: Tukaj priključite napajalni kabel.

The speaker features a 15-inch woofer for deep bass and a 1-inch titanium diaphragm tweeter for clear high frequencies, powered by a 180W RMS Bi-Amp Razred AB amplifier.

Image: Internal components of the Memorex MX-PS1501 speaker, showing the 1.35" tweeter, 3" voice coil, and 15" woofer.

Nastavitev

1. Razpakiranje: Previdno vzemite zvočnik in vso dodatno opremo iz embalaže.
2. voltage Izbor: Locate the AC 110/230V Voltage Switch (Item 16 in Product Overview). Ensure it is set to the correct voltage for your region before connecting power. Nepravilna voltagIzbira lahko poškoduje enoto.
3. Sestava stojala za zvočnike:
   • Extend the legs of the speaker stand to a stable position.
   • Prilagodite višino stojala na želeno raven in jo pritrdite z zatičem in gumbom.
   • Carefully lift the MX-PS1501 speaker and place it onto the pole of the speaker stand. Ensure it is seated securely.
4. Napajalni priključek: Connect the supplied power cable to the AC Power Connect port (Item 17) on the speaker and then to a suitable power outlet.
5. Začetni vklop: Flip the AC Power Switch (Item 15) to the 'ON' position. The speaker's display and LED lights should activate.

Navodila za uporabo

Vklop/izklop

• To turn on, ensure the voltage switch is correct, then press the AC Power Switch to 'ON'.
• To turn off, press the AC Power Switch to 'OFF'.

Bluetooth združitev

1. Turn on the MX-PS1501 speaker.
2. The speaker will automatically enter Bluetooth pairing mode. The DSP Monitor (Item 2) will show "Bluetooth" and may flash.
3. Na mobilni napravi (pametnem telefonu, tabličnem računalniku itd.) omogočite Bluetooth in poiščite razpoložljive naprave.
4. Select "MX-PS1501" from the list of devices.
5. Once paired, the speaker will indicate a successful connection, and the DSP Monitor will show "Bluetooth" steadily.
6. Adjust the Bluetooth Volume Knob (Item 6) and your device's volume to control the audio output.

True Wireless Stereo (TWS) seznanjanje

TWS allows you to connect two MX-PS1501 speakers wirelessly for a stereo sound experience.

Image: Two Memorex MX-PS1501 speakers operating in True Wireless Stereo (TWS) mode, enhancing the audio experience.

1. Ensure both MX-PS1501 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the master speaker), press and hold the TWS button (part of Item 4, Control Panel) for a few seconds until you hear a prompt or see an indicator.
3. The master speaker will search for the second speaker.
4. Once connected, both speakers will indicate successful TWS pairing.
5. Now, connect your mobile device to the master speaker via Bluetooth as described above. Audio will play through both speakers in stereo.

Predvajanje USB/SD

1. Insert a USB drive into the USB Slot (Item 3) or an SD card into the designated slot (if available, not explicitly shown but mentioned in description).
2. The speaker should automatically detect the media and begin playback.
3. Use the Control Panel buttons (Item 4) for Play/Pause, Next Song, and Volume adjustments.

Mikrofonski/linijski vhod

1. Connect your wired microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line XLR Input (Item 10 or 11).
2. Adjust the Mic Line Input Volume Knob (Item 7 or 8) to control the input level.

Pomožni vhod

1. Connect an external audio device (e.g., laptop, MP3 player) to the Aux 3.5mm Input / RCA Input (Item 12) using the appropriate cable.
2. Adjust the volume from your connected device and the master volume on the speaker.

Nadzor LED osvetlitve

• Press the LED Switch Mode Button (Item 14) to cycle through various lighting effects.
• Continue pressing to turn the LED lights off.

Načini DSP

• Use the DSP Preset Select (Item 1) to choose from available sound modes like Standard, Live, Monitor, or Vocal.
• The selected mode will be displayed on the DSP Monitor (Item 2).

Vzdrževanje

• Čiščenje: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the speaker. Do not use liquid cleaners or abrasive materials.
• Shranjevanje: Ko zvočnika dlje časa ne uporabljate, ga shranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Prezračevanje: Prepričajte se, da prezračevalne odprtine zvočnika niso blokirane, da preprečite pregrevanje.

Odpravljanje težav

Specifikacije

Technical specifications for the Memorex MX-PS1501 PA Speaker:

Image: Side and front views of the Memorex MX-PS1501 speaker, illustrating its physical dimensions.

Garancija in podpora

The Memorex MX-PS1501 PA Speaker comes with a 1-letna omejena garancija od datuma nakupa. Ta garancija krije proizvodne napake v materialu in izdelavi pri normalni uporabi.

For warranty claims, technical support, or service inquiries, please contact Memorex customer support. Please have your model number (MX-PS1501) and proof of purchase ready.

Contact information for Memorex customer support is typically found on the manufacturer's webmestu ali vključeni v embalažo izdelka.