Uvod
Thank you for choosing the Princess 2600W Steam Iron. This powerful appliance is designed to make ironing efficient and effortless, featuring a ceramic soleplate, a 220 ml water tank, and various steam functions. Please read this manual carefully before first use to ensure safe operation and optimal performance. Keep these instructions for future reference.
Varnostna navodila
- Vedno zagotovite voltagNavedeno na nalepki z nazivnimi vrednostmi ustreza glasnosti vašega električnega omrežja.tage.
- Likalnika, napajalnega kabla ali vtiča ne potapljajte v vodo ali katero koli drugo tekočino.
- Likalnik hranite izven dosega otrok in hišnih ljubljenčkov.
- The soleplate of the iron can reach very high temperatures. Avoid direct contact with skin.
- Ko likalnika ne uporabljate, ga vedno postavite na stabilno, toplotno odporno površino.
- Pred polnjenjem ali praznjenjem rezervoarja za vodo in ko ga ne uporabljate, likalnik izključite iz električne vtičnice.
- Do not operate the iron with a damaged cord or plug, or if the iron malfunctions or has been dropped or damaged.
- Likalnika nikoli ne puščajte brez nadzora, ko je vklopljen ali priključen na električno omrežje.
- Use only distilled or demineralized water in the water tank to prevent limescale buildup.
Konec izdelkaview
Familiarize yourself with the components of your Princess Steam Iron:
- Šoba za pršenje vode: Za vlaženje trdovratnih gub.
- Dovod za polnjenje vode: Za dodajanje vode v rezervoar.
- Gumb za parni curek: Zagotavlja močan sunek pare.
- Gumb za pršenje: Aktivira vodni pršilnik.
- Drsnik za nadzor pare: Adjusts continuous steam output (Dry, Min, Max).
- Ročaj: Ergonomski ročaj za udobno uporabo.
- Regulator temperature: Izbere ustrezno temperaturo za različne tkanine.
- Indikatorska lučka: Lučka sveti, ko se likalnik segreva, in ugasne, ko je dosežena nastavljena temperatura.
- Napajalni kabel: Priključi likalnik na električno vtičnico.
- Rezervoar za vodo: Holds up to 220 ml of water.
- Keramična likalna plošča: Smooth, scratch-resistant surface for effortless gliding.
- Gumb za samočiščenje: For activating the self-cleaning function.

Slika: Stran view of the Princess Steam Iron, showing its overall design and handle.

Slika: Zgoraj view of the Princess Steam Iron, highlighting the temperature control dial and various function icons.

Image: Close-up of the ceramic soleplate of the Princess Steam Iron, showing steam vents and 'Smooth Glide Scratch Resistant' text.
Nastavitev
Pred prvo uporabo
- Remove any labels, protective film, or stickers from the soleplate.
- Normalno je, da se v prvih nekaj minutah uporabe pojavi rahel vonj ali dim, saj ostanki izgorevajo. To je neškodljivo.
- Preizkusite likalnik na starem kosu blaga, da se prepričate, da se ostanki ne prenesejo na vaša oblačila.
Polnjenje rezervoarja za vodo
- Prepričajte se, da je likalnik izklopljen iz električne vtičnice.
- Set the steam control slider to the 'Dry' (no steam) position.
- Odprite pokrov odprtine za dolivanje vode.
- Using the provided measuring cup, carefully pour distilled or demineralized water into the water tank up to the 'MAX' level indicator. Do not overfill.
- Pokrov odprtine za dolivanje vode trdno zaprite.
Navodila za uporabo
Izbira temperature
- Plug the iron into a suitable power outlet. The indicator light will illuminate.
- Obrnite gumb za nastavitev temperature na želeno nastavitev glede na vrsto tkanine. Glejte etikete za nego tkanin na vaših oblačilih.
- The indicator light will turn off when the set temperature is reached, indicating the iron is ready for use. It will cycle on and off during ironing to maintain the temperature.
- Nastavitve tkanine:
- Nizka temperatura: Sintetika, Svila
- Medium temperature: Wool
- High temperature: Cotton, Linen
Suho likanje
- Ensure the water tank is empty or the steam control slider is set to the 'Dry' position.
- Izberite ustrezno temperaturo za vašo tkanino.
- Once the indicator light turns off, begin ironing.
Parno likanje
- Fill the water tank as described in the 'Setup' section.
- Set the temperature control dial to a steam-suitable setting (typically between 'Wool' and 'Linen' or higher). Steam is only generated at higher temperatures.
- Once the indicator light turns off, slide the steam control to the desired steam level (Min or Max). Continuous steam will be emitted from the soleplate.
- Za trdovratne gube pritisnite Gumb Steam Shot for an extra burst of steam (80 g/min). Wait a few seconds between shots to allow the iron to reheat.
Navpična para
- This function is ideal for removing creases from hanging clothes, curtains, or delicate fabrics.
- Fill the water tank and set the temperature to the maximum setting.
- Likalnik držite navpično, nekaj centimetrov stran od tkanine.
- Pritisnite Gumb Steam Shot večkrat za sprostitev sunkov pare.
Funkcija razpršila
- The spray function can be used with or without steam.
- Pritisnite Gumb za pršenje to emit a fine mist of water, which helps to dampen fabrics and ease crease removal.
Vzdrževanje
Po vsaki uporabi
- Izključite likalnik iz električnega omrežja in ga pustite, da se popolnoma ohladi.
- Iz rezervoarja izpraznite preostalo vodo, da preprečite nabiranje vodnega kamna.
- Obrišite podplat z oglasomamp cloth if necessary. Do not use abrasive cleaners or scouring pads.
- Zunanjost likalnika obrišite z mehko krpoamp krpo.
Samočistilna funkcija
The self-cleaning function helps to remove scale and impurities from the steam chamber and vents.
- Napolnite rezervoar za vodo do oznake 'MAX'.
- Plug in the iron and set the temperature control dial to the maximum setting.
- Ko indikatorska lučka ugasne, izključite likalnik iz električnega omrežja.
- Likalnik držite vodoravno nad umivalnikom.
- Pritisnite in držite Samočistilni gumb (if available, otherwise use the steam shot button repeatedly while shaking gently). Hot water and steam will be expelled from the soleplate, carrying impurities with it.
- Nadaljujte, dokler se rezervoar za vodo ne izprazni.
- Plug the iron back in, let it heat up, and iron an old cloth to dry the soleplate.
Shranjevanje
- Ensure the iron is completely cool and empty of water.
- Likalnik shranjujte pokonci na peti na varnem in suhem mestu.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Železo se ne segreva. | Not plugged in; power outlet faulty; temperature dial set to 'OFF' or too low. | Preverite priključek za napajanje; poskusite z drugo vtičnico; nastavite temperaturni regulator. |
| Ni pare ali premalo pare. | Water tank empty; temperature too low for steam; steam control set to 'Dry'; steam vents blocked. | Fill water tank; set temperature higher; adjust steam control; perform self-clean. |
| Voda pušča iz likalne plošče. | Water tank overfilled; temperature too low for steam; steam control set to steam at low temperature. | Do not overfill; ensure temperature is high enough for steam; set steam control to 'Dry' for low temperatures. |
| Likalna plošča se lepi na tkanino. | Temperature too high for fabric; residue on soleplate. | Reduce temperature; clean soleplate with a damp cloth (when cool). |
Specifikacije
- Številka modela: 01.322890.01.001
- moč: 2600 vatov
- voltage: 230 volta
- Kapaciteta rezervoarja za vodo: 220 ml
- Neprekinjena para: 25 g/min
- Parni strel: 80 g/min
- Material likalne plošče: Keramika
- Posebne lastnosti: Self-cleaning, Vertical Steam, Adjustable Thermostat
- Mere izdelka (D x Š x V): 12 x 11 x 0.1 cm
- Teža artikla: 900 gramov
- Država izvora: Kitajska
Garancija in podpora
This Princess product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Princess website. In case of any issues, questions, or if you require technical assistance, please contact Princess customer support. Have your model number (01.322890.01.001) and purchase details ready when contacting support.