Navodila za uporabo stoječega ventilatorja PELONIS

Uvod

Welcome to your new PELONIS Pedestal Fan. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using your fan.

Pomembna varnostna navodila

• Pred uporabo tega ventilatorja preberite vsa navodila.
• Ne uporabljajte ventilatorjev s poškodovanim kablom ali vtičem.
• Kabla ne potegnite pod preprogo.
• Pred čiščenjem ali servisiranjem vedno izključite ventilator iz električnega omrežja.
• Med delovanjem ventilatorja naj otroci in hišni ljubljenčki ne bodo v bližini.
• Prepričajte se, da je ventilator postavljen na stabilno, ravno površino.

Kaj je v škatli

Your PELONIS Pedestal Fan package includes the following components:

• Sklop glave ventilatorja
• Adjustable Pole (2 sections)
• Osnova
• Daljinski upravljalnik (z 2 baterijama AAA)
• Uporabniški priročnik

Image: All components of the PELONIS Pedestal Fan, including the fan head, two pole sections, base, remote control, and user manual.

Vodnik za namestitev

Montaža

1. Pritrdite palico na podstavek: Screw the lower pole section into the fan base until secure.

   Image: The fan base with the lower pole section attached, illustrating the initial assembly step.

2. Pritrditev glave ventilatorja na drog: Securely screw the fan head assembly onto the top of the pole. Ensure the power cord is routed correctly.

   Image: The fully assembled PELONIS Pedestal Fan, ready for operation.

3. Prilagodi višino (neobvezno): The fan can be used at two different heights (23.2 inches or 42.5 inches) by removing or adding the middle pole section.

   Image: The fan demonstrating its adjustable height feature, showing both the shorter tabletop configuration and the taller pedestal configuration.
4. Vstavite baterije v daljinski upravljalnik: Open the battery compartment on the remote control and insert the two AAA batteries provided.

Umestitev

Ventilator postavite na trdno, ravno površino. Zagotovite dovolj prostora okoli ventilatorja za optimalno kroženje zraka in nihanje.

Navodila za uporabo

Nadzorna plošča in daljinski upravljalnik

The fan can be controlled using the touch-sensitive control panel on the unit or the included remote control.

Image: A close-up of the fan's control panel and the remote control, highlighting the various buttons and indicators.

Vklop/izklop

• Press the Power button (⑂) on the control panel or remote to turn the fan on or off.

Wind Speeds and Modes

• Hitrost vetra: Short press the fan speed button (☸) to cycle through 3 different wind speeds.
• Turbo način: Long press the fan speed button (☸) for 3 seconds to activate Turbo Circulation Mode for maximum airflow.

Video: This video demonstrates how to operate the Pelonis AeroFan, including power on/off, adjusting wind speeds, and activating different modes.

Nihanje

• Navpično nihanje: Short press the vertical oscillation button (↻) to start or stop 135° vertical oscillation.
• Horizontalno nihanje: Short press the horizontal oscillation button (↺) to start or stop 90° horizontal oscillation.
• The fan features OmniFlow Auto-Oscillation for ultra-wide coverage.

Image: The fan illustrating its 135° vertical and 90° horizontal auto-oscillation capabilities.

Funkcija časovnika

• Short press the Timer button (⏱) to set the fan to automatically turn off after 1, 2, or 4 hours.
• To set a timer for 5, 6, or 7 hours, combine the 4-hour setting with the 1-hour, 2-hour, or both settings respectively.

Funkcija pomnilnika

• The fan's memory function automatically restores your previous speed, mode, and timer settings after a power outage.

Vzdrževanje in čiščenje

Generalno čiščenje

• Pred čiščenjem vedno izključite ventilator iz električne vtičnice.
• Uporabite mehko, damp krpo za brisanje zunanjih površin ventilatorja.
• Ne uporabljajte abrazivnih čistil ali topil.

Demontaža za temeljito čiščenje

For thorough cleaning of the fan blades and grilles, follow these steps:

1. Odklopite ventilator.
2. Unscrew the screws at the bottom of the front grille with a screwdriver.
3. Rotate the front grille lock following the unlock arrow direction to remove it.
4. Hold the fan blade and rotate the blade lock clockwise to remove it.
5. Wash the fan blades and grilles with clean water. Wipe the fan with a damp krpo.
6. Reinstall in reverse order. Ensure the blade matches the fan shaft shape.
7. Reinstall the front grille. Align the small triangle on the grille with the lock position and rotate to secure.
8. Screw back the front grille screws to complete assembly.

Video: This video provides a step-by-step guide on how to disassemble and clean the Pelonis AeroFan for optimal performance.

Odpravljanje težav

Specifikacije izdelka

• Blagovna znamka: PELONIS
• Model Name: FG18-23MRL
• Item Model Number: PSFAS07R2ALG
• Dimenzije izdelka: 11.9 cm G x 13.4 cm Š x 42 cm V
• Teža predmeta: 12.98 funtov
• Vir napajanja: AC
• Wattage: 35 vatov
• voltage: 120 V.
• Raven hrupa: 23 dB
• Air Flow Capacity: 900 Cubic Feet Per Minute (CFM)
• Speed: 22 Feet Per Second (ft/s)
• Število rezil: 3
• Control Method: Touch, Remote Controlled
• Special Features: Quiet Operation, Pedestal Base, Oscillating (135° Vertical, 90° Horizontal), 7H Timer, Memory Function, Adjustable Height
• Batteries: 2 AAA batteries required (included for remote)
• Država izvora: Kitajska

Garancija in podpora

For warranty information or technical support, please visit the official PELONIS webspletno mesto ali se obrnite na njihovo službo za stranke.

Visit the PELONIS Store: PELONIS Store on Amazon