LiberLive HKRV-WH01

LiberLive Natural Gas Tankless Water Heater (Model HKRV-WH01)

Outdoor Installation, 5.3 GPM, 130,000 BTU

1. Pomembne varnostne informacije

Read all instructions thoroughly before installation and operation. Failure to follow these instructions could result in property damage, personal injury, or death. Keep this manual for future reference.

Varnostne funkcije

This water heater is equipped with 8 advanced safety features to ensure safe operation:

  • Zaščita pred ugasnitvijo plamena: Automatically shuts off gas supply if the flame is not detected.
  • Zaščita pred pregrevanjem: Prevents the unit from exceeding safe operating temperatures.
  • Zaščita pred suhim zgorevanjem: Activates if the unit operates without sufficient water flow.
  • Zaščita pred zmrzovanjem: Automatically heats the system in low temperatures to prevent freezing (requires continuous power supply).
  • Zaščita pred časovno omejitvijo: Shuts off after a set period of continuous operation.
  • Fan Failure Protection: Ensures proper ventilation and combustion by monitoring fan operation.
  • Pipe Blockage Protection: Detects and responds to blockages in the water pipes.
  • Zaščita pred visokim vodnim tlakom: Safeguards the system against excessive water pressure.
Diagram illustrating 8 types of safety protection features for the LiberLive tankless water heater.

Slika: Konecview of the 8 safety protection features, including flame failure, overheating, and anti-freeze protection.

2. Izdelek je končanview

The LiberLive Natural Gas Tankless Water Heater is designed for outdoor installation, providing on-demand hot water for residential use. It offers a flow rate of up to 5.3 Gallons Per Minute (GPM) and a heat output of 130,000 BTU, suitable for supplying 3-4 outlets simultaneously.

Ključne značilnosti:

  • Outdoor Design: Thickened, corrosion-resistant body materials, stainless steel vents, and a powerful DC fan provide wind protection (up to force 8), freeze protection, sun protection, and IPX4 waterproofing.
  • Stalna topla voda: Delivers hot water instantly without preheating delays.
  • Natančen nadzor temperature: Built-in high-tech chip and staged combustion technology maintain water temperature within 1°F of the set point.
  • Daljinski upravljalnik: Includes a wired remote controller with a reach of up to 49.2 feet for convenient indoor temperature adjustments.
LiberLive tankless water heater mounted on an exterior brick wall, illustrating outdoor installation.

Image: The LiberLive tankless water heater installed on an outdoor wall, emphasizing its outdoor design.

Internal components of the LiberLive tankless water heater, including the high-speed DC fan, oxygen-free copper heat exchanger, T-304 stainless steel burner, and water regulating valve.

Slika: Podrobna view of the water heater's internal components, highlighting the high-quality burner, heat exchanger, and fan.

3. Nastavitev in namestitev

This water heater is designed for outdoor installation only. Ensure the installation location provides adequate clearance and protection as specified in local codes and this manual.

Zahteve za namestitev:

  • Lokacija: Must be installed outdoors. Choose a location that is easily accessible for maintenance and protected from direct impact.
  • Gas Source: Natural Gas. Ensure proper gas line connection by a qualified professional.
  • Električna povezava: Requires a 110V/50Hz power supply.
  • Priključki za vodo: Standard 3/4" NPT fittings for water inlet and outlet.
  • Montaža: Wall-mounted installation. Ensure the mounting surface is sturdy enough to support the unit's weight.

Koraki namestitve (povzetek):

  1. Mount the unit securely to an exterior wall using appropriate hardware.
  2. Connect the natural gas supply line to the 3/4" NPT gas inlet.
  3. Connect the cold water inlet to the 3/4" NPT water inlet.
  4. Connect the hot water outlet to the 3/4" NPT water outlet.
  5. Connect the wired remote controller cable.
  6. Plug the unit into a 110V power outlet.
  7. Verify all connections for leaks and proper sealing.
Diagram showing the dimensions and connection points of the LiberLive tankless water heater, including water inlet, water outlet, and gas inlet.

Image: Product dimensions and connection points for water and gas lines.

Illustration of the LiberLive tankless water heater with included accessories for installation, such as mounting screws and a manual.

Image: The water heater unit alongside included installation accessories and a table of key specifications.

4. Navodila za uporabo

The LiberLive tankless water heater is designed for user-friendly operation, primarily controlled via the remote unit.

Začetni zagon:

  1. Ensure the unit is properly installed and connected to gas, water, and power.
  2. Odprite ventil za dovod plina.
  3. Open a hot water faucet in your home. The unit will detect water flow and initiate heating.
  4. Press the power button on the remote controller to turn the unit on.

Uporaba daljinskega upravljalnika:

The wired remote controller allows for precise temperature adjustment from indoors.

  • Gumb za vklop: VKLOP/IZKLOP enote.
  • Prilagoditev temperature: Use the UP/DOWN arrows to set the desired water temperature. The display shows the current set temperature.
  • Preklapljanje temperaturnih enot: Pritisnite gumb C/F za preklop med Celzijem in Fahrenheitom.
  • Indikatorji zaslona: The remote displays water temperature, fan signal, and flame signal.
A hand operating the remote controller for the LiberLive tankless water heater, with various rooms in the background indicating indoor control.

Image: Remote controller in use, demonstrating indoor temperature adjustment.

Split image showing the outdoor water heater on a patio and the remote controller in a bathroom, highlighting convenient remote control.

Image: Outdoor unit and indoor remote control, illustrating the convenience of remote operation.

Temperaturna stabilnost:

The intelligent chip and staged combustion technology ensure consistent water temperatures, adapting to seasonal changes and maintaining the set temperature with minimal fluctuation.

Diagram illustrating the intelligent chip and water flow sensor working together to maintain stable water temperature.

Image: Intelligent chip and water flow sensor for precise temperature control.

5. Vzdrževanje

Regular maintenance ensures optimal performance and longevity of your tankless water heater. Always disconnect power and gas supply before performing any maintenance.

Letno vzdrževanje:

  • Inspect and Clean Burner: Check for any debris or blockages in the burner assembly. Clean as necessary.
  • Flush Heat Exchanger: Periodically flush the heat exchanger to remove mineral buildup, especially in areas with hard water. Consult a qualified technician for this procedure.
  • Check Gas and Water Connections: Inspect all connections for leaks or corrosion.
  • Examine Venting: Ensure the stainless steel vents are clear of obstructions.
  • Test Anti-Freeze Function: In cold climates, ensure the anti-freeze system is functioning correctly by keeping the unit plugged in during freezing temperatures.

Winterization (if unit is to be shut down):

If the unit will be inactive during freezing temperatures and not continuously powered for anti-freeze protection, it must be properly drained to prevent damage.

  • Izklopite dovod plina v enoto.
  • Izklopite dovod vode v enoto.
  • Open a hot water faucet in the house to relieve pressure.
  • Drain all water from the unit and associated piping.

6. Odpravljanje težav

V tem razdelku so rešitve za pogoste težave. Za težave, ki niso navedene tukaj, se obrnite na podporo strankam.

TežavaMožen vzrokrešitev
Ni tople vode / Enota se ne vklopiNo power, gas supply off, insufficient water flow, remote off.Check power connection, ensure gas valve is open, verify water pressure/flow, turn on remote.
Voda ni dovolj vročaTemperature set too low, high incoming water temperature, multiple fixtures running.Increase set temperature, reduce hot water demand, check for mineral buildup.
Error code on remoteIndicates a specific system fault (e.g., flame failure, overheating).Refer to the detailed error code list in the full manual. Often requires power cycling the unit or professional service.
Temperatura vode nihaInconsistent water flow, mineral buildup, external factors (e.g., cold weather).Ensure stable water pressure, consider flushing the unit, verify anti-freeze protection is active in cold weather.
Enota pušča vodoLoose connections, damaged components, freezing damage.Tighten connections, inspect for visible damage. If freezing is suspected, contact a professional.

7. Specifikacije

Detailed technical specifications for the LiberLive Natural Gas Tankless Water Heater (Model HKRV-WH01).

SpecifikacijaVrednost
ZnamkaLiberLive
Številka modelaHKRV-WH01
Vir napajanjaZemeljski plin
Položaj namestitveOutdoor Installation Only
Nazivni pretok5.3 galon na minuto (GPM)
Toplotna moč130,000 britanskih toplotnih enot (BTU)
Nazivni tlak plina2800 Pa / 2000 Pa
Razpon vodnega tlaka0.025 ~ 0.8 MPa (3.6 - 116 PSI)
Nazivna voltage110V / 50Hz
Wattage35 vatov
Razpon dviga temperature35 °C - 65 °C (95 °F - 149 °F)
Dimenzije izdelka (Š x D x V)14.2 cm x 7.1 cm x 21.7 cm
Water Outlet/Inlet Fittings3/4" NPT
Priključek za dovod plina3/4" NPT
Vrsta materialamedenina, kovina
CertifikatiCSA Certificated

8. Garancija in podpora

LiberLive is committed to providing reliable products and excellent customer service.

Informacije o garanciji:

The LiberLive water heater comes with a comprehensive 2-letna garancija that covers the entire unit from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

Podpora strankam:

For any questions, concerns, or technical assistance, please contact our dedicated customer support team. Have your model number (HKRV-WH01) and purchase date ready when contacting support.

Contact information can typically be found on the LiberLive official webspletno mesto ali dokumentacijo o nakupu.

© 2026 LiberLive. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.