ErGear B0DP1YZNFF

Navodila za uporabo stojala za dvojni monitor ErGear

Model: B0DP1YZNFF

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and use will ensure optimal performance and safety.

Varnostne informacije

  • Pred sestavljanjem se prepričajte, da so vse komponente prisotne in nepoškodovane. Ne uporabljajte, če kateri koli del manjka ali je okvarjen.
  • Verify that your desk surface can support the combined weight of the stand and two monitors.
  • Adhere strictly to the specified monitor size and weight limits to prevent instability or damage.
  • Vse vijake trdno privijte, vendar jih ne premočno privijte, da preprečite strganje navoja.
  • Med namestitvijo hranite otroke in hišne ljubljenčke proč.
  • Always seek professional assistance if you are unsure about any part of the installation process.

Vsebina paketa

Please check that all parts are included in your package:

  • Glavni drog
  • Ročaji za monitorje (2)
  • C-Clamp Osnova
  • Podstavek za pritrditev Grommet
  • VESA plošče (2)
  • Komplet strojne opreme (vijaki, podložke, imbus ključi)
  • Posnetki za upravljanje kablov

Specifikacije

Vrsta namestitveNamizni nosilec (C-Clamp ali tesnilna obroča)
Vrsta gibanjaVrtenje, nagib, rotacija
MaterialLegirano jeklo
barvaČrna
Združljive napraveMonitorji
Najmanjša velikost zaslona17 palcev
Največja velikost zaslona32 palcev
Nosilnost na roko4.4 to 22 lbs (2-10 kg)
Združljivost VESA75x75 mm, 100x100 mm
C-Clamp Debelina mize0.39"-3.15" (10-80 mm)
Grommet Mount Desk Thickness0.4"-2.17" (10-55 mm)

The stand features a 16.54" tall pole and a maximum arm length of 37.8" (from center pole to monitor center).

Product dimensions of the ErGear Dual Monitor Stand, showing overall width of 31.4 inches, arm length of 15.7 inches from center, and pole height of 16.3 inches. Also illustrates C-Clamp and Grommet mount dimensions.
Figure 1: Product Dimensions. This image illustrates the key measurements of the dual monitor stand, including the overall width, individual arm reach, and the height of the central pole. It also shows the compatible desk thickness for both C-Clamp in možnosti montaže Grommet.

Združljivost

Before installation, ensure your monitors meet the following criteria:

  • Velikost zaslona: Each monitor must be between 17 and 32 inches.
  • Teža: Each monitor must weigh between 4.4 lbs (2 kg) and 22 lbs (10 kg).
  • Vzorec VESA: The back of each monitor must have VESA mounting holes with a pattern of either 75x75mm or 100x100mm.
Image showing wide compatibility of the ErGear Dual Monitor Stand, detailing VESA 75x75mm/100x100mm, C-Clamp 0.39-3.15 inch, Grommet Mount 0.39-2.17 inch, max 32 inch monitor size, and max 22 lbs weight.
Figure 2: Wide Compatibility. This image visually confirms the VESA standards, desk thickness requirements for C-Clamp and Grommet mounts, and the maximum monitor size and weight supported by the stand.
Graphic illustrating the ErGear Dual Monitor Stand designed for large monitors, showing compatibility with 17-32 inch screens and a maximum load of 22 lbs per arm. A note advises checking monitor size and weight online.
Figure 3: Designed for Large Monitors. This graphic emphasizes the stand's capacity for monitors ranging from 17 to 32 inches, with a maximum load of 22 lbs per arm. It also advises users to verify their monitor's specifications.
Image showing VESA compatibility for monitors, illustrating 75x75mm and 100x100mm patterns. It also shows how to remove a monitor's original stand if necessary and suggests a VESA adapter for monitors without VESA holes.
Figure 4: Monitor VESA Compatibility. This image clarifies how to identify VESA mounting holes on a monitor and provides guidance for monitors that may require removal of their original stand or the use of a VESA adapter.

Nastavitev

The ErGear Dual Monitor Stand offers two mounting options: C-Clamp and Grommet Mount.

Choosing Your Mounting Method

Image illustrating two ways to mount the ErGear Dual Monitor Stand: Grommet Mount for desk thickness 0.39-2.17 inches and C-Clamp Mount for desk thickness 0.39-3.15 inches.
Figure 5: Two Ways to Mount. This image demonstrates the C-Clamp and Grommet mounting options, along with their respective compatible desk thickness ranges.

C-Clamp Namestitev

  1. Pritrdite C-Clamp podnožje na dno glavnega droga s priloženimi vijaki.
  2. Postavite C-Clamp on the edge of your desk. Ensure the desk thickness is between 0.39" and 3.15".
  3. Zategnite clamp securely until the stand is stable.

Montaža vtičnice

  1. If your desk has a grommet hole, remove its cover. Ensure the desk thickness is between 0.4" and 2.17".
  2. Assemble the grommet mount components as per the instructions in the hardware kit.
  3. Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and nut.

Priklop monitorjev

  1. Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit.
  2. Slide the assembled monitor arms onto the main pole at your desired height and secure them.
  3. Carefully lift each monitor and slide its VESA plate onto the corresponding monitor arm bracket. Ensure it clicks into place or is secured with the locking mechanism.
  4. Adjust the tension screws on the VESA plate to prevent the monitor from tilting freely.

Upravljanje kablov

Utilize the integrated cable management clips on the arms and main pole to route your monitor cables neatly. This helps maintain an organized workspace.

Image showing tidy cables and a clean desk, with monitor cables routed through integrated clips on the monitor stand arms and pole.
Figure 6: Tidy Cables, Clean Desk. This image demonstrates the effective use of cable management clips to keep monitor cables organized and out of sight, contributing to a clutter-free workspace.

Nastavitve delovanja

The ErGear Dual Monitor Stand offers flexible adjustments for optimal viewudobje.

Image showing the fully adjustable features of the ErGear Dual Monitor Stand, including tilt (+65°/-45°), swivel (±90°), and 360° rotation. It also indicates a max arm length of 37.8 inches and a height of 19.09 inches.
Figure 7: Fully Adjustable. This image highlights the extensive range of motion for tilt, swivel, and rotation, allowing users to customize their monitor positions for ergonomic viewing.
Image demonstrating how to position your screen your way with the ErGear Dual Monitor Stand, showing multiple joints with +/-90 degree swivel for a wide range of motion.
Figure 8: Position Your Screen Your Way. This image illustrates the various articulation points on the monitor arms, each offering +/-90 degrees of swivel, enabling a broad spectrum of monitor positioning.

Nastavitev višine

The monitor arms can be moved up or down along the central pole. Loosen the securing knob on the pole, adjust the arms to the desired height, and then retighten the knob firmly.

Image showing ergonomic viewing with the ErGear Dual Monitor Stand, featuring a 16.54 inch tall pole for eye-level comfort and strain-free work. A person is shown comfortably using the setup.
Slika 9: Ergonomska Viewing. This image demonstrates how the 16.54-inch tall pole allows for significant height adjustment, promoting eye-level comfort and reducing strain during work.

Nastavitev naklona

Monitors can be tilted -45° to +65°. Loosen the tilt screw on the VESA plate, adjust the monitor to your preferred angle, and then tighten the screw.

Nastavitev vrtenja

Each monitor arm can swivel ±90° at multiple joints, allowing you to angle your monitors independently.

Nastavitev vrtenja

Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor to the desired orientation.

Four images showing different monitor orientations possible with the ErGear Dual Monitor Stand: two landscape, one landscape and one portrait, two portrait, and one portrait and one landscape.
Figure 10: Monitor Orientation Examples. This graphic illustrates various display configurations, including dual landscape, dual portrait, and mixed orientations, showcasing the 360° rotation capability.

Fine-Tuning Screen Alignment

The stand allows for micro height adjustments (0.19" / 5mm steps) to ensure perfect alignment between two monitors, even if they are of different models or sizes.

Image showing flawless screen alignment with the ErGear Dual Monitor Stand, highlighting micro height adjustment steps of 0.19 inches (5mm) for precise alignment of dual monitors.
Figure 11: Flawless Screen Alignment. This image demonstrates the micro-adjustment feature, allowing for precise vertical alignment of monitors in small increments (0.19 inches or 5mm), which is crucial for a seamless dual-screen setup.

Vzdrževanje

  • Redno preverjajte vse vijake in povezave, da se prepričate, da so trdno priviti in varno pritrjeni.
  • Očistite stojalo z mehko, damp krpo. Izogibajte se abrazivnim čistilom ali topilom.
  • Periodically inspect the monitor arms for any signs of wear or damage.

Odpravljanje težav

IzdajaMožen vzrokrešitev
Monitor sags or does not hold positionMonitor weight exceeds capacity; tilt screw is loose.Verify monitor weight is within 4.4-22 lbs. Tighten the tilt screw on the VESA plate.
Stojalo je nestabilnoC-Clamp or Grommet mount is not tightened sufficiently.Zagotovite C-Clamp or Grommet mount is securely fastened to the desk. Check desk thickness compatibility.
Monitors are not levelArms are not at the same height; micro-adjustment needed.Adjust the height of each arm on the main pole. Use the micro height adjustment feature for fine-tuning.

Garancija in podpora

The ErGear Dual Monitor Stand comes with a 2-letna garancija from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any questions regarding your product, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear webspletno mesto za kontaktne podatke.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.