Brightever YS-CGD20-01

Brightever Under Cabinet Lights Instruction Manual

Model: YS-CGD20-01

1. Uvod

Thank you for choosing Brightever Under Cabinet Lights. These LED rechargeable lights are designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, bedrooms, closets, and hallways. Featuring motion sensor capabilities, stepless dimming, and multiple installation options, these lights enhance visibility and energy efficiency in your home.

2. Kaj je v škatli

  • 5 x Brightever Under Cabinet Lights
  • Navodila za uporabo
  • Mounting Hardware (screws and expansion anchors)
  • Lepilne kovinske plošče
  • 3 x USB polnilni kabli
  • Warranty/Explanation Sheet

3. Specifikacije izdelka

FunkcijaSpecifikacija
ZnamkaBrightever
Številka modelaYS-CGD20-01
Barvna temperatura6500K (hladno bela)
Kapaciteta baterije1500 mAh (za ponovno polnjenje)
Svetlost150 lumnov
Razpon zatemnitve10 %–100 % brezstopenjsko zatemnitev
Kot zaznavanja senzorja gibanja120°
Motion Sensor Sensing Range10FT
Auto-Off Time (Motion Sensor Mode)20 sekund nedejavnosti
Čas polnjenja3-4 ur za polno polnjenje
Battery Life (Always On Mode)Up to 10 hours (at 100% brightness)
Battery Life (Motion Sensor Mode)35-60 days (sensing 10-20 times/day)
MaterialAkril, aluminij, plastika
Mere predmeta (D x Š x V)7.78 cm D x 1.57 cm Š x 0.39 cm V
Notranja/zunanja uporabaNotranja

4. Nastavitev in namestitev

The Brightever Under Cabinet Lights offer three convenient installation methods:

Method 1: Magnetic Attachment

The lights have built-in powerful magnets. If your desired mounting surface is ferromagnetic (e.g., a metal refrigerator or shelf), you can directly attach the light to it.

Magnetic attachment method for under cabinet light
Image: The light bar magnetically attaches to a metal surface, demonstrating Method 1 of installation.

Method 2: Adhesive Metal Plate

For non-ferromagnetic surfaces, use the provided adhesive metal plates.

  1. Clean the installation area thoroughly to ensure it is dry and free of dust.
  2. Peel off the protective film from the adhesive side of the metal plate.
  3. Attach the metal plates to the desired location. Ensure they are aligned with the magnets on the back of the light.
  4. Snap the light onto the attached metal plates.
Adhesive metal plate installation for under cabinet light
Image: Steps showing how to attach the light using adhesive metal plates under a cabinet.

3. način: Pritrditev z vijaki

For a more permanent installation, use the provided screws and expansion anchors.

  1. Mark two holes at the mounting spot, spacing them to match the width of the light bar's mounting points.
  2. Drill holes at the marked spots. Insert the expansion anchors.
  3. Secure the metal plates with screws into the anchors.
  4. Mount the light onto the secured metal plates.
Screw mounting installation for under cabinet light
Image: Illustration of drilling holes and using screws to mount the light, suitable for walls or cabinets.

Video vodnik za namestitev

Video: Official Brightever guide demonstrating the installation process and various features of the under cabinet lights.

5. Navodila za uporabo

The under cabinet lights feature a user-friendly button for control.

User-friendly button and detailed function of the light
Image: Diagram showing the light panel, PIR sensor, switch, and USB-C port, with instructions for operation.

Vklop/izklop in izbira načina

  • Pritisnite enkrat: To power on the light.
  • Ponovno pritisnite: To switch to Motion Sensor Mode.
  • Press a third time: To shut down the light.

Brezstopenjsko zatemnitev

While the light is on (in either mode), long press the button to steplessly adjust the brightness from 10% to 100%. The light features a memory function that retains the last set brightness level.

Always On Mode with adjustable brightness
Image: Visual representation of the 'Always On Mode' and the adjustable brightness slider from 10% to 100%.

Način senzorja gibanja

In Motion Sensor Mode, the light automatically detects human activity within a 120° detection angle and a 10FT sensing range. It will turn off after 20 seconds of inactivity to conserve energy.

Smart PIR Motion Sensor features
Image: Diagram illustrating the 120° detection angle and 10FT sensing range of the PIR motion sensor, with auto-off after 20 seconds.

Polnjenje luči

The lights are equipped with a 1500mAh rechargeable battery. Use the provided USB charging cables for optimal performance.

  • Connect the USB charging cable to the USB-C port on the light.
  • A red indicator light will show that the device is charging.
  • The indicator light will turn green when fully charged (approximately 3-4 hours).
  • A full charge provides up to 10 hours of light in Always On Mode (at 100% brightness) or 35-60 days in Motion Sensor Mode (based on 10-20 detections per day).
1500mAh rechargeable battery with USB-C charging
Image: Close-up of the light bar showing the USB-C charging port and the 1500mAh battery capacity.

6. Vzdrževanje

  • Čiščenje: Površino luči obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
  • Vzdrževanje baterije: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when the brightness noticeably diminishes.
  • Shranjevanje: If storing the lights for an extended period, charge them fully and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.

7. Odpravljanje težav

  • Lučka se ne prižge:
    • Prepričajte se, da je baterija napolnjena. Priključite na vir napajanja s priloženim kablom USB.
    • Check if the light is in the correct operating mode (Always On or Motion Sensor). Press the button to cycle through modes.
  • Motion sensor is not detecting movement:
    • Prepričajte se, da senzor ni oviran.
    • Verify the light is in Motion Sensor Mode.
    • Avoid positioning multiple sensors too closely, as this may interfere with operation.
    • The detection range is 10FT and angle is 120°. Ensure movement occurs within this area.
  • Baterija se hitro izprazni:
    • Ensure the light is fully charged (indicator turns green).
    • In Motion Sensor Mode, frequent activations will consume more battery.
    • Ensure you are using the provided charging cables. Other cables may not be compatible and could affect charging efficiency or battery lifespan.
  • Svetloba je prešibka ali presvetla:
    • Long press the button to adjust the brightness using the stepless dimming feature.

8. Varnostne informacije

  • Izdelka ne razstavljajte ali spreminjajte.
  • Hraniti ločeno od vode in okolic z visoko vlažnostjo.
  • Do not expose to direct sunlight or high temperatures.
  • Hraniti izven dosega otrok.
  • Baterije zavrzite v skladu z lokalnimi predpisi.

9. Garancija in podpora

Brightever is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your under cabinet lights, please refer to the included Warranty/Explanation Sheet or contact Brightever customer service. We strive to offer friendly and helpful services.

© 2026 Brightever. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.