1. Izdelek je končanview
The DATOUBOSS 12V 100Ah LiFePO4 Lithium Battery is a high-performance, deep-cycle battery designed for a wide range of applications including RVs, solar energy systems, trolling motors, and camping setups. Featuring a built-in 100A Battery Management System (BMS), this battery offers advanced protection against common issues such as over-voltage, over-discharge, over-current, and high temperatures, ensuring safe and reliable operation. Its lightweight and compact design make it an ideal replacement for traditional lead-acid batteries, providing superior energy density and a longer lifespan.
Figure 1: DATOUBOSS 12V 100Ah LiFePO4 Battery with key dimensions and specifications.
2. Kaj je v škatli
Upon unboxing your DATOUBOSS 12V 100Ah LiFePO4 Lithium Battery, please ensure all components are present and undamaged.
- 1x DATOUBOSS 12V 100Ah LiFePO4 Battery
- Terminal Bolts (M8) and Washers
- Terminal Caps (Red and Black)
- Uporabniški priročnik
Video 1: Unboxing and initial inspection of the DATOUBOSS 12V 100Ah LiFePO4 Battery.
3. Specifikacije
| Značilno | Vrednost |
|---|---|
| Nazivna voltage | 12.8 V |
| Nazivna zmogljivost | 100Ah |
| energija | 1280 Wh |
| Vgrajen BMS | 100A |
| Življenjski cikel | 15000+ (Deep Cycle) |
| Teža | 10.92 kg (24.07 lbs) |
| Dimenzije (D x Š x V) | 25.8 cm x 16.7 cm x 21.5 cm (10.2 palca x 6.6 palca x 8.5 palca) |
| Velikost terminala | M8 |
| maks. Polnilni tok | 50A |
| maks. Razelektritveni tok | 120A |
| Delovna temperatura (polnjenje) | 0 °C do 45 °C (32 °F do 113 °F) |
| Delovna temperatura (praznjenje) | -20 °C do 60 °C (-4 °F do 140 °F) |
| Ocena vodotesnosti | IP65 |
4. Ključne značilnosti
- Built-in BMS Protection: Equipped with a 100A BMS, the battery is protected against high temperature, over-voltage, overload, overcharge, over-discharge, overcurrent, and short circuit, ensuring safe operation.
- Easy Battery Pack Expansion: This battery supports series and parallel connections, allowing expansion up to 4P4S for a 48V (51.2V) 400Ah Li-Ion battery pack, delivering up to 20.48kWh energy.
- Higher Performance & Safety: Constructed with automotive-grade, UL-certified LiFePO4 cells and an IP65 waterproof rating, it offers stable performance, high energy density, and superior reliability.
- 1/3 Lighter & 1/2 Smaller Size: Weighing only 10.92kg, it is significantly lighter and more compact than comparable lead-acid batteries, simplifying installation and portability.
- Široka uporaba: Suitable for various uses including backup power, home energy storage, lighting, trolling motors, fish finders, lawnmowers, golf carts, boats, solar power systems, UPS backup, RVs, and caravans.
Figure 2: Visual representation of the built-in BMS protection features.
5. Nastavitev in namestitev
5.1 Povezava terminala
Before connecting, ensure the battery is placed on a stable, non-conductive surface. Remove the protective caps from the positive (red) and negative (black) terminals. Securely attach your battery cables using the provided M8 terminal bolts and washers. Ensure connections are tight to prevent arcing and overheating.
Video 2: Demonstrates the unboxing and terminal connection process.
5.2 Zaporedne in vzporedne povezave
The DATOUBOSS LiFePO4 battery can be connected in series (for higher voltage) or parallel (for higher capacity). For optimal performance and to reduce voltage differences between batteries, fully charge each battery separately before connecting them. After individual charging, connect them one by one in parallel and allow them to sit for 12-24 hours to balance. Then, you can connect your batteries in series or parallel as needed, up to 4P4S configuration.
Slika 3: Nprample configurations for series and parallel battery connections.
6. Polnjenje
Use a dedicated LiFePO4 compatible charger. The recommended charging voltage is 14.4V ± 0.2V, and the maximum charge current is 50A. Avoid using chargers designed for lead-acid batteries unless they have a specific LiFePO4 mode, as this can damage the battery.
Video 3: Demonstrates battery charging and voltage testiranje.
7. Navodila za delovanje
The DATOUBOSS LiFePO4 battery is designed for deep cycle applications, providing consistent power output. The built-in BMS actively monitors and protects the battery during use. Ensure your load does not exceed the maximum continuous discharge current of 100A or the peak discharge current of 120A.
- Delovna temperatura: Discharge between -20°C to 60°C (-4°F to 140°F).
- voltage Stabilnost: The battery maintains voltage above 12.5V even at 90% discharged state, providing stable power.
Video 4: Primerample of battery discharge operation powering various devices.
8. Vzdrževanje
LiFePO4 batteries are largely maintenance-free. However, following these guidelines will ensure optimal performance and longevity:
- Redni pregled: Občasno preverjajte, ali so priključki akumulatorja korodirani ali ali so zrahljani. Po potrebi jih očistite.
- Shranjevanje: If storing the battery for extended periods, recharge it every 6 months to maintain cell health.
- Uravnoteženje celic: The BMS includes a balancing function. To ensure optimal cell balance, fully charge the battery to 100% periodically.
9. Odpravljanje težav
9.1 BMS Cut-off for Protection
If the BMS cuts off the battery for protection (e.g., due to over-discharge, over-current, or high temperature), disconnect the load from the battery and let the battery rest for 30 minutes. The battery will automatically recover itself to normal voltage in ga je mogoče uporabljati po popolnem polnjenju.
9.2 Battery Unable to Hold a Charge (Low Voltage)
If the battery's voltage is too low to hold a charge (e.g., 0V), you can activate it in two ways:
- Use a charger with a 0V charging function. This can charge the battery starting from 0V, allowing it to be used normally after a full charge.
- Connect an 18V-36V solar panel to charge the battery for 3-10 sunny days.
10. Varnostne informacije
Prosimo, preberite in upoštevajte vsa varnostna navodila, da preprečite poškodbe ali škodo:
- Baterije ne potapljajte v vodo in ne dovolite, da se zmoči.
- Baterije ne uporabljajte in ne shranjujte v bližini virov toplote, kot je ogenj ali grelec.
- Use only chargers recommended by the manufacturer.
- Ne zamenjajte pozitivnih (+) in negativnih (-) sponk.
- Ne povzročajte kratkega stika baterije s povezovanjem žic ali drugih kovinskih predmetov na pozitivni (+) in negativni (-) pol.
- Ne poskušajte razstaviti ali spremeniti baterije.
- Baterije ne uporabljajte, če oddaja vonj, se segreva, se razbarva ali deformira ali je kakor koli nenavadna.
11. Garancijski pravilnik
DATOUBOSS provides a 2-year warranty for all batteries. This warranty covers manufacturing defects and ensures the battery performs according to the manual. If you encounter any problems, please contact customer support with your purchase details.
12. Podpora strankam
For technical assistance, troubleshooting, or warranty claims, please contact DATOUBOSS customer service. Refer to your purchase documentation for specific contact information or visit the official DATOUBOSS webmesto.