WOOXGEHM T6125 Digital Insulation Resistance Tester User Manual

1. Uvod

This manual provides detailed instructions for the safe and effective operation of the WOOXGEHM T6125 Digital Insulation Resistance Tester. The T6125 is a robust, shockproof, and dustproof instrument designed for measuring insulation resistance, absorption ratio (DAR), polarization index (PI), AC voltage, and low resistance. It features a wide measurement range, multiple output voltage levels, a large LCD with backlight, and strong anti-interference capabilities, making it suitable for various electrical equipment testing applications.

Figure 1: WOOXGEHM T6125 Digital Insulation Resistance Tester.

2. Varnostne informacije

To ensure safe operation and prevent damage to the instrument or injury to personnel, please read and understand all safety instructions before use.

• Always observe local and national safety codes.
• Do not operate the tester if it appears damaged or is not functioning properly.
• Ensure the circuit under test is de-energized and discharged before connecting test leads for resistance measurements.
• Use only the provided test leads and accessories.
• Avoid touching the test leads or the circuit under test during measurement, especially when high voltages so prisotni.
• Do not use the instrument in wet environments or explosive atmospheres.
• Baterije takoj zamenjajte, ko se prikaže indikator nizkega stanja baterije.

3. Vsebina paketa

Preverite, ali so v vašem paketu prisotni vsi spodaj navedeni elementi:

• 1 x WOOXGEHM T6125 Digital Insulation Resistance Tester
• 1 x par testnih kablov
• 1 x External Power Plug (5.5mm)
• 2 x Alligator Clips
• 1 x platnena torba
• 1 x Uporabniški priročnik (angleščina)

4. Izdelek je končanview

The T6125 insulation tester is designed for comprehensive electrical insulation testing. Key features include:

• Merjenje izolacijske upornosti: Measures insulation opposition, absorption ratio, and polarization index.
• AC Voltage meritev: Capable of measuring AC voltage.
• Low Resistance Measurement: For continuity checks.
• Multiple Test Voltages: Offers 100V, 250V, 500V, 1000V, and 2500V test voltage možnosti.
• Automatic Discharge Function: Ensures safety after high voltage testi.
• Zadrževanje podatkov: Zamrzne prikazano meritev za lažje beleženje.
• Over-range Alarm: Alerts the user when measurements exceed the selected range.
• Samodejni izklop: Powers off after 30 minutes of inactivity to conserve battery life.
• Velik LCD z osvetlitvijo ozadja: Provides clear readings in various lighting conditions.
• Trajna zasnova: Shockproof, dustproof, and dampness-proof construction.

Figure 2: Front panel layout and key components of the T6125.

• Visoka glasnosttage Output Black Negative Jack: Connects the negative test lead for high voltage testi.
• Visoka glasnosttage Output Red Positive Jack: Connects the positive test lead for high voltage testi.
• Resistor Red Positive Jack: Connects the positive test lead for resistance measurements.
• Resistive Black Negative Jack: Connects the negative test lead for resistance measurements.
• 12V Power Input Jack: Za zunanje napajanje.
• LCD zaslon: Shows measurement readings and status.
• Testni gumb: Začne meritev.
• Gumb za zadrževanje podatkov: Freezes the current display.
• Gumb za osvetlitev ozadja: Vklopi/izklopi osvetlitev ozadja LCD-zaslona.
• DAR (Absorption Ratio) / PI (Polarization Index) Button: Selects DAR or PI measurement mode.
• Gear Rotary Switch: Selects measurement function and test voltage.

Figure 3: The T6125 features an automatic shutdown function after 30 minutes of inactivity to conserve battery life.

5. Nastavitev

5.1 Namestitev baterije

The T6125 requires 8 x 1.5V AA batteries (not included).

1. Poiščite predal za baterije na zadnji strani enote.
2. Odprite pokrov prostora za baterije.
3. Vstavite 8 AA bateriji in pazite na pravilno polarnost (+/-).
4. Trdno zaprite pokrov prostora za baterije.

5.2 Priključitev merilnih vodnikov

Connect the test leads to the appropriate jacks on the front panel based on the measurement type. For insulation resistance tests, use the High Voltage Output jacks. For low resistance, use the Resistor jacks.

6. Navodila za uporabo

6.1 Vklop/izklop

Rotate the Gear Rotary Switch from the "OFF" position to any measurement function to power on the device. Rotate back to "OFF" to power off. The device will automatically shut down after 30 minutes of inactivity.

6.2 Merjenje izolacijskega upora

This function measures the insulation resistance of electrical equipment.

1. Ensure the circuit under test is de-energized and safely discharged.
2. Connect the test leads to the High Voltage Output jacks (red to positive, black to negative).
3. Connect the other ends of the test leads to the insulation points of the equipment to be tested.
4. Rotate the Gear Rotary Switch to the desired insulation test voltage (e.g., 100V, 250V, 500V, 1000V, 2500V).
5. Pritisnite in držite TEST button. The measurement will begin, and the resistance value will be displayed on the LCD.
6. Spustite TEST button to stop the measurement. The instrument will automatically discharge the circuit.
7. Za zadržanje odčitka pritisnite PRIDRŽI button during or after a measurement. Press again to release.

Figure 4: The T6125 offers a wide insulation test measurement range up to 2500V and 200.0GΩ.

6.3 Absorption Ratio (DAR) and Polarization Index (PI) Measurement

DAR and PI are used to assess the quality of insulation over time.

1. Follow steps 1-3 for Insulation Resistance Measurement.
2. Rotate the Gear Rotary Switch to the desired insulation test voltage.
3. Pritisnite DAR/PI button to select the desired mode. The display will indicate "DAR" or "PI".
4. Pritisnite in držite TEST button. The instrument will automatically perform the timed measurements and display the DAR or PI value.
5. Spustite TEST gumb.

6.4 AC Voltage Merjenje

Za merjenje AC voltage:

1. Rotate the Gear Rotary Switch to the "ACV" position.
2. Connect the test leads to the circuit where AC voltage needs to be measured.
3. AC voltage bo prikazan na LCD-prikazovalniku.

6.5 Low Resistance Measurement

For continuity or low resistance checks:

1. Rotate the Gear Rotary Switch to the "Ω" (low resistance) position.
2. Connect the test leads to the Resistor jacks.
3. Connect the other ends of the test leads to the component or circuit to be measured.
4. Vrednost upora bo prikazana na LCD-prikazovalniku.

7. Vzdrževanje

7.1 Čiščenje

Obrišite instrument z oglasomamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the instrument is completely dry before storage or next use.

7.2 Shranjevanje

When not in use for extended periods, remove the batteries to prevent leakage. Store the instrument in the provided cloth bag in a cool, dry place, away from direct sunlight and extreme temperatures.

• Temperatura shranjevanja: od -20 ℃ do 60 ℃
• Working Conditions: 0℃ to 40℃
• Relativna vlažnost: 40% do 75%

8. Odpravljanje težav

If you encounter issues with your WOOXGEHM T6125, refer to the following common problems and solutions:

• Brez napajanja:
  • Preverite, ali so baterije pravilno vstavljene in ali so dovolj napolnjene. Po potrebi jih zamenjajte.
  • Ensure the Gear Rotary Switch is not in the "OFF" position.
• Netočni odčitki:
  • Verify test leads are securely connected and not damaged.
  • Ensure the correct measurement function and test voltage so izbrani.
  • Clean the test points on the equipment being measured.
  • Preverite zunanje vire motenj.
• "OL" or Over-range Display:
  • The measured value exceeds the selected range. Try a higher test voltage or a different range if applicable.
  • Zagotovite pravilno povezavo z vezjem.

Če težave ne odpravite, se obrnite na podporo strankam.

9. Specifikacije

Insulation Test Accuracy (T-6125)

Figure 5: Detailed insulation test accuracy specifications for the T6125 model.

Figure 6: Physical dimensions of the WOOXGEHM T6125.

10. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WOOXGEHM webspletno mesto. Shranite račun kot dokazilo o nakupu.