1. Pomembna varnostna navodila
Preberite vsa varnostna opozorila, navodila, ilustracije in specifikacije, ki so priložene temu električnemu orodju. Neupoštevanje vseh spodaj navedenih navodil lahko povzroči električni udar, požar in/ali resne poškodbe.
- Vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali, rokavicami in zaščito za sluh.
- Med delovanjem orodja držite roke in noge stran od verige.
- Ensure the battery is removed before making any adjustments, changing accessories, or storing the tool.
- Orodja ne uporabljajte v eksplozivnem okolju, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
- Med uporabo električnega orodja naj se otroci in navzoče osebe ne približujejo. Motnje lahko povzročijo izgubo nadzora.
- Ves čas ohranjajte pravilno nogo in ravnotežje. Ne pretiravajte.
- Za vašo nalogo uporabite pravilno orodje. Orodja ne silite.
- Neuporabljeno orodje shranjujte izven dosega otrok in ne dovolite osebam, ki niso seznanjene z električnim orodjem ali s temi navodili, da ga uporabljajo.
- Always inspect the tool for damage before use. Do not use if damaged.
2. Izdelek je končanview
The Protmex PTX-DUA-A is a versatile 2-in-1 cordless tool designed for efficient tree pruning and wood cutting. It can be used as a compact mini chainsaw or extended into a pole saw for reaching higher branches.
Slika 1: The Protmex 2-in-1 Cordless Pole Saw and Mini Chainsaw, shown with its various components including the main unit, extension pole, two batteries, charger, safety glasses, and gloves.
Vsebina paketa:
- Chainsaw Unit (6-inch)
- Podaljšani pol
- 2 x 21V 4000mAh Lithium-Ion Batteries
- Polnilec baterij
- Zaščitna očala
- Delovne rokavice
- Uporabniški priročnik
3. Nastavitev in montaža
3.1 Polnjenje baterije
Before first use, fully charge both batteries. Insert the battery into the charger and plug the charger into a standard power outlet. The indicator light on the charger will show the charging status.
Slika 2: The included 21V 4.0Ah Lithium-Ion batteries and charger. Ensure batteries are fully charged before use for optimal performance.
3.2 Chain Installation (if required)
The chain may come pre-installed. If not, or if replacing the chain, follow these steps:
- Turn the green cover counter-clockwise to remove it, then take off the cover, guide bar, and old chain (if replacing).
- Push the pin to the RIGHT to lock it.
- Place the guide bar and new chain on the saw, ensuring the pin fits through the guide bar hole. Check the chain alignment.
- Press the guide plate near the pin, return the pin to its original position; the chain will self-tension.
- Reinstall the covers, ensuring everything is secure.
- Tighten the green cover clockwise UNTIL IT CAN'T TURN FURTHER.
Slika 3: Visual instructions for installing or replacing the chainsaw chain. Proper installation is crucial for safe and effective operation.
3.3 Assembling the Pole Saw Configuration
To convert the mini chainsaw into a pole saw:
- Attach the chainsaw head to the extension pole. Ensure it clicks securely into place.
- Adjust the pole height to your desired working length. The pole is retractable and can extend to provide a maximum working length of approximately 15 feet (based on a 6ft person holding the pole at shoulder level).
- Insert a charged battery into the battery slot on the handle.
Slika 4: Assembly sequence for the pole saw configuration. This image illustrates attaching the chainsaw head, adjusting the pole, and inserting the battery.
4. Navodila za uporabo
4.1 Splošno delovanje
Once assembled and with a charged battery, press the safety button and then the trigger to start the chainsaw. The tool features stepless speed control for flexible operation.
Slika 5: The 2-in-1 tool in action, demonstrating its use as both a pole saw for tree pruning and a mini chainsaw for cutting smaller branches.
4.2 Rezalni koti
The chainsaw head offers adjustable cutting angles from 0° to 180°, allowing for versatile cutting in various positions.
Slika 6: The adjustment knob for tool-free chain tensioning and the visual representation of the 0°-180° adjustable cutting angles.
4.3 Varnostne funkcije
- Varnostni gumb: Prevents accidental activation. Must be pressed before the trigger.
- Wood Chip Guard: Blocks debris during operation.
- Sponge Handle: Provides shockproof grip for comfort and control.
- Oblika traku: For safer operation, especially when using as a pole saw.
Slika 7: konecview of the integrated safety features designed to enhance user protection and operational stability.
5. Vzdrževanje
5.1 Mazanje verige
The chainsaw features an auto lubrication system. Ensure the oil reservoir is filled with appropriate chainsaw bar and chain oil before each use. This system provides continuous lubrication for smooth cutting and extended chain life.
Slika 8: Demonstrating the auto oil system. Regularly check and refill the oil reservoir to ensure proper chain lubrication.
5.2 Nastavitev napetosti verige
Proper chain tension is critical for safe and efficient operation. Check chain tension frequently, especially during initial use and after prolonged cutting.
- If loose, turn the cover counter-clockwise to slightly loosen (avoid over-loosening).
- Move the guide bar up/down to self-tension. If not tight, check "HOW TO INSTALL CHAIN" for proper positioning.
- Tighten the green cover clockwise UNTIL IT CAN'T TURN FURTHER. If the chain loosens quickly, it wasn't tightened properly.
Slika 9: Visual instructions for adjusting the chain tension. Correct tension prevents chain derailment and ensures optimal cutting performance.
5.3 Čiščenje in skladiščenje
- After each use, remove the battery and clean the tool of sawdust and debris.
- Use a soft brush or cloth. Do not use harsh chemicals.
- Orodje shranjujte na suhem in varnem mestu, izven dosega otrok.
- Ensure the chain is covered with its protective sheath during storage.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Orodje se ne zažene | Battery not charged or improperly inserted; Safety button not pressed; Faulty battery or tool. | Ensure battery is fully charged and correctly inserted. Press the safety button before the trigger. Test with a different charged battery if available. Contact support if problem persists. |
| Veriga se ustavlja ali slabo reže | Chain tension incorrect; Chain dull; Insufficient lubrication; Battery low. | Adjust chain tension (refer to Section 5.2). Sharpen or replace chain. Refill oil reservoir. Recharge or replace battery. |
| Prekomerne vibracije | Ohlapna veriga; Poškodovana veriga ali meč. | Preverite in prilagodite napetost verige. Preverite verigo in vodilo glede poškodb in ju po potrebi zamenjajte. |
| Puščanje olja | Overfilled oil reservoir; Damaged oil cap or seal. | Do not overfill the oil reservoir. Ensure oil cap is securely tightened. Inspect for damage and contact support if leakage continues. |
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | PTX-DUA-A |
| Znamka | Protmex |
| Vir napajanja | Napajanje na baterije (brezžično) |
| Vrsta baterije | 21V 4000mAh (4.0Ah) Lithium-Ion |
| Dolžina verige | 6 palcev (15 cm) |
| Hitrost verige | 33 ft/s |
| Vrsta motorja | Brezkrtačni motor |
| Adjustable Cutting Angles | 0° - 180° |
| Max Working Length (Pole Saw) | Up to 15 feet (approximate, depending on user height) |
| Weight (Mini Chainsaw) | Približno 3.3 lbs (1.5 kg) |
| Skupna teža artikla | 10.88 pounds (packaging/full kit) |
| Sistem mazanja | Samodejno |
8. Garancija in podpora
Protmex products are designed for reliability. For warranty information, technical support, or assistance with parts, please refer to the contact information provided in your product packaging or visit the official Protmex webmesto.
The manufacturer offers dedicated support and assistance. If you encounter any issues, please reach out to customer service for solutions.
Protmex is committed to providing quality products and customer satisfaction.