Povasee 5000A Jump Starter with Air Compressor (Model A6) - Instruction Manual

1. Izdelek je končanview

The Povasee 5000A Jump Starter with Air Compressor, Model A6, is a versatile multi-functional device designed for automotive emergencies and convenience. It integrates six essential features: a powerful jump starter, a tire inflator, a flashlight with SOS signaling, a power bank, and a tire pressure gauge. This device is engineered to provide reliable assistance for a wide range of vehicles and situations.

Image 1: Povasee Jump Starter with Air Compressor and various accessories.

This image displays the Povasee Jump Starter unit alongside its included accessories, such as jumper cables, air hose, and charging cables, all neatly arranged to showcase its comprehensive functionality.

2. Varnostne informacije

Pred uporabo tega izdelka preberite vsa varnostna opozorila in navodila. Neupoštevanje opozoril in navodil lahko povzroči električni udar, požar in/ali hude poškodbe.

• Vedno priključite rdeči priključekamp na pozitivni (+) terminal in črni clamp na negativni (-) terminal.
• Ne dotikajte se rdeče in črne clamps together to prevent short circuits.
• Pred uporabo se prepričajte, da je zaganjalnik popolnoma napolnjen.
• Hraniti izven dosega otrok.
• Izdelka ne izpostavljajte dežju ali mokri.
• Ne razstavljajte enote. Servisiranje prepustite usposobljenemu osebju.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

Image 2: Visual representation of the 10 intelligent secure protection features.

This image highlights the advanced safety mechanisms built into the Povasee A6, including over-current, short-circuit, over-voltage, over-charge, over-discharge, reverse-polarity, spark-resistance, over-heat, reverse-connection, and extreme-temperature protection.

3. Vsebina paketa

Po odprtju paketa preverite, ali so vsi elementi prisotni:

• Povasee 5000A Jump Starter with Air Compressor (Model A6)
• Pametni skakalni kabli
• Air Hose with 4 Nozzles
• Polnilni kabel USB-C
• Uporabniški priročnik
• Torbica za shranjevanje

Image 3: All components of the Povasee Jump Starter kit, including the main unit, smart jumper cables, air hose with various nozzles, USB-C charging cable, user manual, and a durable storage case.

Ta slika ponuja jasen view of everything included in the product package, ensuring users can confirm they have all necessary parts.

4. Značilnosti in komponente izdelka

The Povasee A6 is designed for ease of use and maximum utility. Key components include:

• Glavna enota: Features a digital display for battery percentage and working status, power button, and various ports.
• Vrata za zagon: Dedicated port for connecting smart jumper cables.
• Vrata USB-A in USB-C: Za polnjenje zunanjih naprav (funkcija prenosne baterije).
• DC izhod: 12V/10A output for powering 12V vehicle accessories.
• Svetilka LED: Integrated 800-lumen flashlight with SOS and strobe modes.
• Kompresor: Built-in 150 PSI air compressor with smart preset and auto-stop function.

Slika 4: Bližnji posnetek view of the jump starter's various ports, digital display, and LED flashlight.

This image provides a detailed look at the device's interface, highlighting the USB-IN, Type-C OUT, DC output, and the 800-lumen LED light, along with the digital display showing battery status.

5. Nastavitev in polnjenje

5.1 Polnjenje zaganjalnika

Before first use, fully charge the Povasee A6. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Priloženi polnilni kabel USB-C priključite na vhod USB-C na zaganjalniku.
2. Drugi konec kabla USB-C priključite na združljiv stenski adapter USB (ni priložen).
3. The digital display will show the charging progress. The unit is fully charged when the display shows 100%.

5.2 Preverjanje ravni baterije

Press the power button once to check the current battery level on the digital display.

6. Navodila za uporabo

6.1 Zagon vozila s pomocjo

The Povasee A6 can jump start 12V vehicles with up to 9L gas or 8L diesel engines.

1. Ensure the jump starter is at least 50% charged.
2. Insert the smart jumper cable plug firmly into the jump start port on the unit.
3. Priključite rdeči (+) clamp na pozitivni (+) pol akumulatorja vozila.
4. Povežite črni (-) klamp na negativni (-) pol akumulatorja vozila.
5. Once connected, the indicator light on the smart clamp will turn green, indicating it's ready to jump start. If the light is red or flashing, check connections or refer to troubleshooting.
6. Zaženite motor vozila.
7. Once the engine starts, immediately remove the smart jumper cables from the vehicle battery within 30 seconds, then disconnect from the jump starter.
8. If the vehicle does not start on the first attempt, wait at least 1 minute before trying again. If the battery voltage is extremely low (below 9V), press the "RST" button on the smart clamp to activate boost mode, then attempt to start the engine.

Image 5: Visual instructions for connecting the jump starter to a car battery and starting the vehicle.

This image illustrates the four key steps for jump starting a car: inserting the plug, clamping to the battery terminals (red to positive, black to negative), starting the vehicle, and removing the jumper cables.

6.2 Uporaba zračnega kompresorja

The built-in air compressor can inflate tires up to 150 PSI and features an auto-stop function.

1. Short press the power switch to turn on the unit.
2. Priključite zračno cev na steblo ventila pnevmatike.
3. Use the "M" button to select the desired unit (PSI, KPA, BAR) and the "+" / "-" buttons to set the target pressure.
4. Press the air compressor switch to begin inflation. The compressor will automatically stop once the preset pressure is reached.
5. For different inflatables (balls, bicycles, motorcycles, cars), use the appropriate nozzle adapter.

Image 6: The Povasee Jump Starter actively inflating a car tire, demonstrating its air pump functionality.

This image shows the jump starter connected to a car tire, with the digital display indicating the tire pressure, highlighting its use as an emergency air pump.

6.3 Using the Power Bank and Flashlight

The unit can also serve as a power bank and an emergency flashlight.

• Power Bank: Connect your USB-powered devices to the USB-A or USB-C output ports to charge them.
• Svetilka: Press and hold the power button for 3 seconds to turn on the 800-lumen LED flashlight. Press again for strobe mode, and a third time for SOS signaling. Press and hold again to turn off.

Image 7: The jump starter's LED light illuminated, showcasing its emergency torch capabilities with SOS and strobe functions.

This image demonstrates the powerful 800-lumen LED flashlight feature, highlighting its utility for nighttime emergencies or as a general light source, with options for SOS and strobe signaling.

7. Vzdrževanje

• Napravo shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Recharge the unit every 3-6 months to prolong battery life.
• Zunanjost očistite z mehko, damp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih materialov.
• Pred vsako uporabo preverite kable za zagon in zračno cev za morebitne poškodbe.

8. Odpravljanje težav

• Enota se ne vklopi: Prepričajte se, da je enota napolnjena.
• Vozilo se ne zažene: Check that jumper cables are correctly connected (red to positive, black to negative). Ensure the smart clamp indicator is green. If battery is extremely low, use boost mode.
• Air compressor not working: Check that the air hose is securely connected and the unit is powered on. Ensure the desired pressure is set.
• Naprava se ne polni iz prenosne baterije: Ensure the device is compatible with USB charging and the cable is properly connected.

9. Specifikacije

10. Garancija in podpora

For warranty information, technical support, or customer service inquiries, please refer to the contact details provided in your product packaging or visit the official Povasee webmesto. Shranite račun za garancijske zahtevke.