Ashly EcoTour™ 500.2 Professional Touring Power Ampuporabniški priročnik za lifier

1. Uvod

The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 amplifier.

2. Varnostne informacije

Pred uporabo te naprave preberite in razumite vsa varnostna navodila. Ta priročnik shranite za poznejšo uporabo.

WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
POZOR: Za zmanjšanje nevarnosti požara ali električnega udara te opreme ne izpostavljajte dežju ali vlagi.
Ta naprava je skladna s 15. delom pravil FCC. Delovanje je odvisno od naslednjih dveh pogojev: (1) Ta naprava ne sme povzročati škodljivih motenj in (2) ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje.
Poskrbite za ustrezno prezračevanje, da preprečite pregrevanje. Ne blokirajte prezračevalnih odprtin.
Always disconnect the power cord before performing any maintenance or making connections.

3. Izdelek je končanview

The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.

3.1 Funkcije sprednje plošče

Slika 1: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.

Stikalo za vklop: Located on the left side of the front panel, used to turn the amplifier VKLOP/IZKLOP.
Channel Gain Controls: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
LED indikatorji: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.

3.2 Lastnosti zadnje plošče

Slika 2: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.

Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
Nastavitve DIP stikala: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
AC vhod: Standard IEC power inlet for the detachable AC power cord.
voltage Izbirnik: A switch to select between 115V and 230V operation for international use.
Ventilatorji za hlajenje: Two cooling fans provide front-to-rear airflow for thermal management.

4. Nastavitev

Follow these steps to properly set up your Ashly EcoTour™ 500.2 amplifier.

Razpakiranje: Previdno odstranite ampVzemite iz embalaže. Preverite, ali so kakšni znaki poškodb.
Montaža na stojalo: The amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
voltage Izbor: Before connecting to power, verify the voltagIzbirno stikalo na zadnji plošči je nastavljeno na pravilno glasnosttagza vašo regijo (115 V ali 230 V). Nepravilna voltagIzbira lahko poškoduje enoto.
Vhodne povezave: Priključite svoj avdio vir (mešalni mešalnik, prednastavitev)amplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
Slika 3: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.
Izhodne povezave: Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
Slika 4: Detail of SpeakON connector wiring on the rear panel.

Konfiguracija DIP stikala: Adjust the DIP switches on the rear panel according to your system requirements.

Tabela 1: Nastavitve stikala DIP
Nastavitev	Položaj ON	Položaj OFF
Onemogoči sprednjo ploščo	Omogočeno	Onemogočen
HPF (visokoprepustni filter)	Omogočeno	Onemogočen
Omejevalnik	Omogočeno	Onemogočen
Dobiček	26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations)	Default/Other Gain Setting

Refer to the detailed diagram on the rear panel for specific gain switch combinations.

Napajalni priključek: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.

5. Navodila za uporabo

Ko je amplifier is properly set up, follow these steps for operation.

Vklop: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amplifier. The power indicator LED will illuminate.
Prilagodi ojačanje: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
LED-diode monitorja:
- SIG LED: Illuminates when an audio signal is present on the channel.
- LIMIT LED: Zasveti, ko je amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
Ugasniti: Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the amplifier.

6. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega amplifier.

Čiščenje: Zunanjost očistite z mehko, suho krpo ampNe uporabljajte tekočih čistil ali topil.
Prezračevanje: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
Kabelske povezave: Periodically check all input and output cable connections for secure fit and signs of wear.
Shranjevanje: Če shranjujete amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.

7. Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite pri amplifier.

Tabela 2: Priročnik za odpravljanje težav
Težava	Možen vzrok	rešitev
Brez moči	Power cord disconnected, outlet fault, voltagizbirnik e je napačen.	Check power cord connection, try a different outlet, verify voltagnastavitev izbirnika e.
Ni zvoka	Input/output cables disconnected, gain set to minimum, source device off, speaker fault.	Check all cable connections, increase gain, ensure audio source is active, test speakers.
Distorted sound / LIMIT LED constantly on	Vhodni signal je previsok, amplifier overloaded, speaker impedance mismatch.	Reduce input signal level, lower channel gain, ensure speaker impedance matches ampocena rešilca.
Pregrevanje	Zamašeno prezračevanje, prekomerna obremenitev.	Ensure clear airflow around the unit, reduce load, check fan operation.

8. Specifikacije

Model: ECOTOUR500.2-120V-U
Izhodna moč: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
Kanali: 2
Vhodni priključki: XLR, 1/4-inch (TRS/TS)
Izhodni priključki: SpeakON
voltage: 100-240VAC, 50/60Hz (selectable)
Dimenzije: 16 x 19 x 3.5 palcev (40.64 x 48.26 x 8.89 cm)
Teža artikla: 18.5 funtov (8.39 kg)
Lastnosti: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.

9. Garancija in podpora

For warranty information or technical support, please contact Ashly customer service or visit the official Ashly webmesto.

Ashly Store: Visit the Ashly Store on Amazon

10. Related Videos (Not Applicable)

No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.

Ashly ECOTOUR500.2-120V-U