Sharkoon AK6 RGB ATX PC Case User Manual

1. Uvod

Thank you for choosing the Sharkoon AK6 RGB ATX PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this guide thoroughly before beginning the assembly process to ensure optimal performance and longevity of your components.

2. Varnostne informacije

• Preden namestite ali odstranite kakršne koli komponente v ohišju računalnika, vedno izključite napajalnik iz stenske vtičnice.
• S kaljenimi steklenimi ploščami ravnajte previdno. So krhke in se lahko zlomijo, če padejo ali so izpostavljene udarcu.
• Avoid exposing the case to extreme temperatures, humidity, or direct sunlight.
• Keep small parts and screws out of reach of children.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive electronic components.

3. Vsebina paketa

Prosimo, preverite, ali so v vašem paketu vsi elementi:

• Sharkoon AK6 RGB ATX PC ohišje
• Accessory box (containing screws, cable ties, and other small parts)
• Uporabniški priročnik (ta dokument)

4. Izdelek je končanview

The Sharkoon AK6 RGB ATX PC Case is designed with a modern glass aesthetic, featuring seamless integration of tempered glass on the front and side panels. It includes four pre-installed 120mm addressable RGB PWM fans for optimal airflow and visual appeal. The case supports a wide range of components, including BTF motherboards, and offers ample space for high-performance hardware.

Figure 4.1: Front interior view of the Sharkoon AK6 RGB PC case, showcasing the pre-installed addressable RGB fans and the spacious main chamber.

Slika 4.2: Pod kotom view of the Sharkoon AK6 RGB PC case, highlighting the tempered glass side panel and the top mesh for ventilation.

Slika 4.3: Zadaj view of the Sharkoon AK6 RGB PC case, showing the I/O shield cutout, rear exhaust fan mount, and expansion slots.

Sprednja V/I plošča

The front I/O panel is located on the side of the case and includes:

• Gumb za vklop
• Gumb za ponastavitev
• 2 x USB Ports (Type-A)
• 1 x vrata USB Type-C
• Audio Jacks (TRRS)

5. Nastavitev in namestitev

Follow these steps to install your components into the Sharkoon AK6 RGB PC Case.

5.1 Priprava primera

1. Ohišje postavite na ravno, stabilno površino.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling the panel away.
3. Remove the rear metal side panel by unscrewing the thumb screws.

5.2 Namestitev matične plošče

The AK6 RGB supports Mini-ITX, Micro-ATX, ATX, and BTF motherboards.

1. Install the I/O shield into the cutout at the rear of the case (if not pre-installed on your motherboard).
2. Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Matično ploščo pritrdite z ustreznimi vijaki iz škatle s pripomočki.

Slika 5.1: Notranjost view of the Sharkoon AK6 RGB PC case, illustrating the motherboard tray, cable management cutouts, and front fan mounting points.

5.3 Namestitev napajalnika

The case features a bottom-mount power supply design.

1. Slide the power supply unit (PSU) into the dedicated compartment at the bottom rear of the case.
2. Align the PSU with the screw holes at the rear of the case.
3. Napajalnik pritrdite s priloženimi vijaki.

5.4 Namestitev pomnilniške naprave

The AK6 RGB supports up to two 3.5" HDDs or four 2.5" SSDs.

1. For 3.5" HDDs: Locate the drive cages beneath the PSU shroud. Slide the HDD into a drive tray and secure it with screws.
2. For 2.5" SSDs: SSDs can be mounted on the dedicated brackets behind the motherboard tray or on the 3.5" drive trays using adapter screws.

Slika 5.2: Zadnja notranjost view of the Sharkoon AK6 RGB PC case, detailing the drive cages for 3.5-inch HDDs and 2.5-inch SSDs, and the power supply shroud area.

5.5 Namestitev grafične kartice in razširitvene kartice

1. Odstranite potrebne pokrove razširitvenih rež na zadnji strani ohišja.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on your motherboard.
3. Secure the cards with screws. The case includes a rubberized graphics card support for larger cards.

5.6 CPU Cooler and Radiator Installation

The case supports CPU coolers up to 17 cm in height and allows for extensive liquid cooling setups.

• Namestite hladilnik procesorja v skladu z navodili proizvajalca.
• For liquid cooling, the case can accommodate a 360mm radiator at the top and an additional 280mm radiator.

5.7 Upravljanje kablov

Utilize the cable management cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and aesthetics.

6. Navodila za uporabo

6.1 Vklop

After all components are installed and cables are connected, replace the side panels. Connect the power cable to your PSU and a wall outlet, then press the power button on the front I/O panel to start your system.

6.2 RGB Fan Control

The AK6 RGB comes with four pre-installed addressable RGB PWM fans. These fans are connected to an RGB controller which also provides connections for up to four LED elements and four PWM fans. The RGB lighting can typically be controlled via your motherboard's RGB software (if compatible) or through a dedicated button on the case (if present and connected).

6.3 Airflow Optimization

The case is designed for ideal airflow, with three inverted fans drawing air from the side into the case. The top and rear fan mounts allow for additional exhaust fans. Ensure proper fan orientation for optimal cooling performance.

Slika 6.1: Nprample of a fully assembled system within the Sharkoon AK6 RGB PC case, featuring various components and active RGB lighting.

7. Vzdrževanje

Regular maintenance helps ensure the longevity and performance of your PC components.

• Filtri za prah: Periodically clean the removable dust filters (e.g., on the top and bottom) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• Steklene plošče: Kaljeno steklo čistite z mehko krpo, ki ne pušča vlaken, in čistilom za steklo. Izogibajte se abrazivnim materialom, ki bi lahko opraskali površino.
• Čiščenje notranjosti: Use compressed air to remove dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.

8. Odpravljanje težav

If you encounter issues with your PC case, refer to the following common troubleshooting steps:

• Brez napajanja: Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power cables (24-pin ATX, 8-pin CPU, PCIe power).
• Ventilatorji se ne vrtijo/RGB ne deluje: Verify that all fan and RGB cables are correctly connected to the motherboard or the included RGB controller. Check your motherboard's BIOS/UEFI settings or RGB software for fan speed and lighting control.
• Sprednja vhodno/izhodna vrata ne delujejo: Confirm that the front panel connectors (USB, audio, power/reset switches) are correctly plugged into the corresponding headers on your motherboard.
• Pregrevanje: Ensure all fans are spinning correctly and oriented for proper airflow. Clean dust filters and internal components. Verify CPU cooler installation.

For further assistance, please contact Sharkoon support.

9. Specifikacije

10. Garancija

Sharkoon products are manufactured to high quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon webGarancija običajno krije napake v materialu in izdelavi pri normalni uporabi.

11. Podpora

If you require technical assistance or have questions regarding your Sharkoon AK6 RGB ATX PC Case, please visit the official Sharkoon website for support resources, FAQs, and contact information. You may also find updated drivers or software for the RGB controller there.

Webspletno mesto: www.sharkoon.com