MILESEEY D5-APP-US Laser Measuring Tool User Manual

1. Izdelek je končanview

The MILESEEY D5-APP-US is a high-precision laser distance meter designed for various measurement tasks. It features smart app connectivity, an electronic angle sensor, and multiple measurement modes for efficiency and accuracy.

Figure 1: MILESEEY D5-APP-US Laser Measuring Tool and included accessories. The package contains the laser measure, a portable bag, a portable bracelet, a user manual, and 2 x 1.5V AAA batteries.

2. Nastavitev

2.1 Namestitev baterije

The device requires 2 x 1.5V AAA alkaline batteries. Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 Vklop/izklop

Za vklop naprave pritisnite MERS button. The laser will stand by for measurement. To power off, long-press the IZKLOP/POČISTI button. The device will automatically shut off after 180 seconds of inactivity to conserve power.

2.3 Preklapljanje enot

To switch measurement units (M/FT/IN), long-press the ENOTA button. The device supports various units including meters, feet, inches, and fractional inches. For area and volume measurements, only m² / m³ and ft² / ft³ are available.

Figure 2: Instructions for changing measurement units and setting reference points. Long-press the UNIT button to cycle through units (m, ft, in, ft+in). Short-press the UNIT button to change the reference point between front and back.

2.4 Reference Point Setting

The default reference point is the end of the device. To change the reference point (front or back), short-press the ENOTA button. This is crucial for accurate measurements depending on where the device is placed.

2.5 Buzzer On/Off

To turn the buzzer sound on or off, long-press the sound button. A speaker icon with a cross will appear on the display when the buzzer is off.

2.6 Smart APP Connectivity

The MILESEEY D5-APP-US syncs with the "Smart Life" app for real-time data transfer and storage of up to 1000 sets. The app allows you to create 2D floor plans or annotate images with measurements.

Figure 3: The laser measuring tool connected to the Smart Life app, showing real-time data transfer and storage capabilities.

Figure 4: The Smart Life app allows users to draw on pictures or create hand-drawn floor plans with integrated measurements.

3. Načini delovanja

3.1 Enotna meritev

Pritisnite MERS button once to activate the laser. Press it again to take a single distance measurement. The result will be displayed on the screen.

3.2 Neprekinjeno merjenje

Dolgo pritisnite na MERS button for 2-3 seconds to enter continuous measurement mode. The device will continuously measure and display the maximum, minimum, and current values. Short-press MERS again to stop and display the final data.

3.3 Merjenje površine

Pritisnite NAČIN button until the area icon appears. Take two consecutive measurements (length and width). The device will automatically calculate and display the area.

3.4 Merjenje prostornine

Pritisnite NAČIN button until the volume icon appears. Take three consecutive measurements (length, width, and height). The device will automatically calculate and display the volume.

3.5 Pythagorean Measurement (Indirect Length)

The device supports 2-point and 3-point Pythagorean measurements for indirect length calculations. Press the NAČIN button until the desired Pythagorean icon appears. Follow the on-screen prompts to take the required measurements. For best accuracy, especially with handheld measurements, using a tripod is recommended.

3.6 Seštevanje in odštevanje

To add or subtract measurements, take the first measurement, then press the + or - button. Take the next measurement, and the result of the operation will be displayed. This function can be used for length, area, and volume calculations.

3.7 Electronic Angle Sensor

The device features an advanced electronic angle sensor that provides real-time angle display. This allows for faster and more accurate measurements compared to traditional bubble levels, especially for indirect height and distance calculations.

Figure 5: The electronic angle sensor provides real-time angle display, enhancing accuracy for various measurements.

4. Vzdrževanje

4.1 Accuracy Check

To check the accuracy of the measuring tool, select a permanently unchangeable indoor measuring section (approx. 9.8 to 32 ft or 3 to 10 m long) with weak backlighting and a smooth, reflective target area (e.g., a white-painted wall). Measure the distance 10 times in succession. The deviation of individual measurements from the average value must not exceed ±0.12 in (±2 mm). Record these measurements to compare accuracy at a later date.

4.2 Splošna nega

Keep the device clean and dry. Avoid exposing it to extreme temperatures or direct sunlight for extended periods. The device has an IP54 rating, indicating protection against dust and splashing water, but it is not fully waterproof.

Figure 6: The device features an IP54 rating for dust and splash resistance.

5. Odpravljanje težav

The device displays error codes for various issues. Refer to the table below for common error codes and their corrective measures.

6. Specifikacije

7. Garancija in podpora

The MILESEEY D5-APP-US Laser Measuring Tool comes with a 2-year warranty. For technical support or warranty claims, please refer to the contact information provided in the product packaging or on the official MILESEEY webmesto.