Uporabniški priročnik za toplotno stiskalnico za klobuke OFFNOVA

1. Uvod

Thank you for choosing the OFFNOVA Hat Heat Press Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heat press. Designed for both sublimation and HTV iron-on projects, this machine offers precise temperature and time control, ensuring consistent and professional results for various cap styles.

Figure 1.1: OFFNOVA Hat Heat Press Machine (Handle-Blue) with example hats.

Ključne značilnosti:

• Rapid & Even Heating: One-piece cast aluminum heating plate with Teflon coating for uniform heat distribution up to 400°F (204°C).
• Easy & Stable Operation: Ergonomic handle and four-bar linkage system, combined with anti-slip silicone suction cups for stability.
• Dual Cap Platens: Includes 2 interchangeable hat bases with different curvatures to fit 99% of cap styles, plus a built-in hat stretcher.
• Nastavljiv nadzor tlaka: Easy-to-turn pressure knob for fine-tuning pressing force.
• Smart Auto Countdown: Automatic timing initiation upon handle pull-down and audible alert upon completion.

2. Komponente in nastavitev

2.1 Razpakiranje in pregled

Carefully remove all components from the packaging. Inspect the machine for any signs of damage during transit. Retain the original packaging for future storage or shipping.

2.2 Identifikacija komponent

Seznanite se z glavnimi deli vašega stroja za toplotno stiskanje:

• Grelna plošča (zgornja)
• Lower Platen (Interchangeable)
• Control Panel (Digital Display, Temp/Time Buttons)
• Gumb za nastavitev tlaka
• Ročaj za upravljanje
• Stikalo za napajanje
• Vhod za napajalni kabel

Figure 2.1: Machine dimensions and interchangeable platens (4x3 inch and 5.5x3.7 inch).

2.3 Začetna nastavitev

1. Place the heat press on a stable, heat-resistant surface. Ensure adequate ventilation around the machine.
2. Connect the power cord to the machine's power inlet and then to a grounded electrical outlet (AC110V/60Hz).
3. Prepričajte se, da je stikalo za vklop v položaju OFF, preden ga priključite.
4. Select and install the appropriate lower platen for your cap size. The machine comes with two interchangeable platens to accommodate various cap styles.

3. Navodila za uporabo

3.1 Konec nadzorne ploščeview

Figure 3.1: Digital Control Panel for Temperature and Time.

• Digitalni zaslon: Prikazuje trenutno temperaturo in nastavljeni čas.
• Nadzor temperature: Adjustable from 0-400°F (0-204°C).
• Nadzor časa: Adjustable from 0-999 seconds.
• moč: 500 W.
• voltage: AC110V/60Hz.
• Time Up Alarm: Alerts when the set time is complete.
• Samodejno odštevanje: Initiates automatically when the handle is pressed down.

3.2 Nastavitev tlaka

The pressure adjustment knob, located on top of the heating platen, allows you to fine-tune the pressing force. Turn clockwise to increase pressure and counter-clockwise to decrease pressure. Adjust based on the thickness of the cap and transfer material for optimal results.

3.3 Postopek po korakih

Figure 3.2: Four-step operation guide.

1. Prepare the Hat: Place your hat on the lower platen. Adjust the pressure knob as needed to ensure a snug fit and even contact.
2. Nastavite temperaturo in čas: Turn on the power switch. Use the control panel to set your desired temperature and time according to your transfer material's specifications. The machine will begin to heat up.
3. Initiate Pressing: Once the machine reaches the set temperature, place your transfer design on the hat. Pull the operating handle down firmly to engage the heating platen. The automatic countdown will begin.
4. Popoln prenos: When the set time expires, an alarm will sound. Release the handle and carefully remove the hat. Allow the transfer to cool if required by the material's instructions.

Figure 3.3: Machine in use, demonstrating versatile application.

4. Vzdrževanje

4.1 Čiščenje

• Pred čiščenjem vedno izključite napravo iz električnega omrežja in jo pustite, da se popolnoma ohladi.
• Wipe the Teflon-coated heating platen with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they can damage the coating.
• Clean the lower platen and exterior surfaces with a damp krpo.
• Ensure no liquids enter the control panel or electrical components.

4.2 Shranjevanje

Store the heat press in a dry, dust-free environment. If possible, use the original packaging for protection. Keep out of reach of children.

5. Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite. Za težave, ki niso navedene tukaj, se obrnite na podporo strankam.

6. Specifikacije

7. Informacije o garanciji

The OFFNOVA Hat Heat Press Machine (Model HPM-H0) comes with a 1-letna garancija od datuma nakupa. Ta garancija krije proizvodne napake in okvare pri normalni uporabi. Za uveljavljanje garancije shranite dokazilo o nakupu.

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official OFFNOVA webmesto.

8. Podpora strankam

If you have any questions, require technical assistance, or need to report an issue with your OFFNOVA Hat Heat Press Machine, please contact our customer support team.

Please have your model number (HPM-H0) and purchase information ready when contacting support to expedite assistance.

Za več informacij in virov lahko obiščete OFFNOVA Store on Amazon.