1. Izdelek je končanview
This manual provides essential information for the proper use and maintenance of the Xhorse Original 2.5mm Milling Cutter. Designed for precision key cutting, this cutter is a critical component for various Xhorse key cutting machines.
Ime izdelka: Xhorse Original 2.5mm Milling Cutter
Številka modela: HKSL25
Združljivost: This milling cutter is specifically designed for use with the following Xhorse key cutting machines:
- Condor XC-Mini Plus
- Condor XC-Mini Plus II
- Condor XC-002
- Dolphin XP005
- Dolphin XP005L
- Dolphin XP007
Image 1: Xhorse 2.5mm Milling Cutters in packaging.
Image 2: Xhorse 2.5mm Milling Cutter compatibility with various Xhorse key cutting machines.
2. Varnostne informacije
Always prioritize safety when working with cutting tools and machinery. Failure to follow safety guidelines can result in injury or damage to equipment.
- Zaščita oči: Always wear appropriate eye protection (safety glasses or goggles) to shield against flying debris.
- Zaščita rok: Use gloves when handling cutters to prevent cuts and to maintain a firm grip.
- Odklop napajanja: Ensure the key cutting machine is powered off and unplugged before installing, removing, or performing maintenance on the milling cutter.
- Varna namestitev: Verify that the cutter is securely installed in the machine's spindle before operation. A loose cutter can cause damage or injury.
- Pregled rezalnika: Before each use, inspect the cutter for any signs of damage, wear, or dullness. Do not use damaged cutters.
- Ohranjajte jasno: Keep hands, loose clothing, and long hair away from moving parts during machine operation.
- Prezračevanje: Ensure adequate ventilation in the work area, especially when cutting materials that may produce fine dust.
- Otroci in hišni ljubljenčki: Keep children and pets away from the work area and operating machinery.
3. Nastavitev in namestitev
Proper installation of the milling cutter is crucial for accurate key cutting and to prevent damage to the cutter or machine.
- Ugasniti: Ensure your Xhorse key cutting machine is turned off and unplugged from the power source.
- Access Spindle: Open the machine's protective cover to access the cutter spindle area.
- Remove Old Cutter (if applicable): If replacing an existing cutter, carefully loosen the retaining screw(s) or collet nut that secures the cutter. Remove the old cutter, exercising caution as it may be sharp or hot if recently used.
- Čisto vreteno: Clean the spindle and collet area to remove any debris or metal shavings. A clean seating surface ensures proper alignment.
- Insert New Cutter: Carefully insert the Xhorse 2.5mm Milling Cutter into the collet. Ensure it is seated fully and correctly. Do not force the cutter.
- Secure Cutter: Tighten the retaining screw(s) or collet nut firmly. Do not overtighten, as this can damage the cutter or collet. Ensure the cutter is held securely and does not wobble.
- Zapri naslovnico: Close the machine's protective cover.
- Vklop: Plug in and power on your key cutting machine. Perform a test cut or calibration as recommended by your machine's specific manual.
Image 3: Installing the milling cutter into an Xhorse key cutting machine.
4. Navodila za uporabo
The Xhorse 2.5mm Milling Cutter is designed for precise key duplication and cutting. Always refer to your specific Xhorse key cutting machine's manual for detailed operating procedures.
- Machine Calibration: Before cutting, ensure your key cutting machine is properly calibrated according to its manufacturer's instructions. This includes probe calibration and jaw alignment.
- Key Blank Selection: Use the correct key blank for the key you intend to cut.
- Secure Key Blank: Firmly secure the key blank and the original key (if duplicating) in the machine's clamps. Ensure they are aligned correctly.
- Cutting Parameters: Select the appropriate cutting parameters (e.g., key type, depth, speed) on your machine's interface. The 2.5mm cutter is suitable for a wide range of standard key types.
- Supervise Cutting: Always supervise the key cutting process. Do not leave the machine unattended while it is operating.
- Post-Cut Inspection: After cutting, carefully remove the new key and inspect it for accuracy and burrs. Use a deburring tool or fine file da odstranite vse ostre robove.
Image 4: Cutters and probes in operational setup on Xhorse key cutting machines.
5. Vzdrževanje
Regular maintenance extends the life of your milling cutter and ensures consistent cutting performance.
- Čiščenje: After each use, carefully remove the cutter from the machine (ensure power is off) and clean it with a soft brush or compressed air to remove metal shavings and debris. Do not use harsh chemicals that could damage the cutter's coating or material.
- Pregled: Periodically inspect the cutter for signs of wear, chipping, or dullness. A dull cutter will produce poor quality cuts and put undue strain on the machine. Replace worn cutters promptly.
- Mazanje: Some key cutting machines may require lubrication of certain components. Refer to your machine's manual for specific lubrication guidelines. The cutter itself typically does not require lubrication.
- Shranjevanje: Store the milling cutter in its original protective case or a dedicated tool holder when not in use. This prevents damage to the cutting edges and protects against corrosion. Store in a dry, cool place.
6. Odpravljanje težav
If you encounter issues during key cutting, consider the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Slaba kakovost reza / Grobi robovi | Dull or damaged cutter, incorrect cutting parameters, loose key blank, machine calibration issue. | Inspect and replace cutter if worn. Verify cutting parameters. Ensure key blank is securely clamped. Recalibrate machine. |
| Cutter breakage | Excessive cutting force, incorrect cutting speed, material too hard for cutter, cutter not securely installed. | Reduce cutting speed/force. Ensure cutter is appropriate for material. Verify secure installation. Replace broken cutter. |
| Key not cutting to correct depth | Incorrect machine calibration, worn probe, incorrect key blank alignment. | Recalibrate machine and probe. Check key blank alignment in clamps. |
If troubleshooting steps do not resolve the issue, contact Xhorse customer support or a qualified service technician.
7. Specifikacije
Detailed specifications for the Xhorse 2.5mm Milling Cutter (Model HKSL25).
| Funkcija | Podrobnost |
|---|---|
| Številka modela | HKSL25 |
| Velikost | 2.5 mm |
| Material | volframov karbid |
| Vrsta zaključka | Nedokončano |
| Število flavt | 10 |
| End Cut Type | Okrogla |
| Vrsta reza | Center Cutting |
| Število rezalnih robov | 2 |
| Tolerance Held | Natančnost |
| Teža predmeta | 2.39 unč |
| Dimenzije paketa | 3.35 x 2.36 x 0.59 palcev |
Image 5: Comparison of Xhorse probes and milling cutters of various sizes.
8. Garancija in podpora
Xhorse products are manufactured to high-quality standards. For specific warranty information regarding your Xhorse 2.5mm Milling Cutter, please refer to the documentation provided with your purchase or visit the official Xhorse webmesto.
For technical support, product inquiries, or warranty claims, please contact Xhorse customer service through their official channels. When contacting support, please have your product model number (HKSL25) and purchase details readily available.
Xhorse Official Webspletno mesto: www.xhorse.com
