uxcell V-156-1C25 Micro Limit Switch Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective installation, operation, and maintenance of the uxcell V-156-1C25 Micro Limit Switch. This precision component is designed to monitor the position of moving parts in various mechanical systems and can be integrated into AC/DC control circuits for terminal limit protection.

Please read this manual thoroughly before using the product to ensure proper function and to prevent potential hazards.

Six uxcell V-156-1C25 micro limit switches in a package

Figure 1: Package containing six uxcell V-156-1C25 Micro Limit Switches.

2. Specifikacije izdelka

The uxcell V-156-1C25 Micro Limit Switch features a robust design suitable for various industrial and home applications. Key specifications are detailed below:

Specifikacija	Vrednost
Model	V-156-1C25
Vrsta stika	1 normalno odprt (NO) + 1 normalno zaprt (NC)
Trenutni Voltage Ocena	15A 125/250VAC
Stopnja zaščite	IP40 (Dust ingress protected, protected against water spray)
Overall Size (LWH)	28 mm x 16 mm x 10 mm (1.1" x 0.63" x 0.39")
Dolžina zatiča	9 mm (0.35 palcev)
Vrsta namestitve	Površinska montaža
Število enot	6 na paket

Diagram showing dimensions and contact types of the V-156-1C25 micro limit switch

Figure 2: Detailed dimensions and contact configuration of the micro limit switch.

3. Varnostne informacije

WARNING: Electrical components can cause injury or death. Always disconnect power before installation, maintenance, or troubleshooting. Installation should only be performed by qualified personnel.

Ensure the power supply matches the switch's voltage in trenutne ocene.
Avoid exposing the switch to conditions beyond its IP40 rating (e.g., direct water immersion).
Verify all connections are secure to prevent short circuits or loose contacts.
Do not modify the switch or its components.

4. Nastavitev in namestitev

The V-156-1C25 micro limit switch is designed for surface mounting and integration into control circuits.

4.1. Montaža

Identify a suitable mounting location where the switch's lever can be actuated by the moving part it is intended to monitor.
Secure the switch using appropriate fasteners through its mounting holes. Ensure it is firmly attached to prevent movement during operation.
Adjust the position of the switch or the actuator arm to ensure reliable contact and release with the moving part.

4.2. Ožičenje

The switch features 1 Normally Open (NO) and 1 Normally Closed (NC) contact, along with a Common (COM) terminal. Refer to the markings on the switch for correct terminal identification.

COM (Skupno): This is the shared terminal for both NO and NC contacts.
NE (običajno odprto): This contact is open (no current flow) when the switch is in its unactuated (rest) position and closes (allows current flow) when the switch is actuated.
NC (normalno zaprto): This contact is closed (allows current flow) when the switch is in its unactuated (rest) position and opens (stops current flow) when the switch is actuated.

Connect the switch into your AC or DC control circuit according to your application's requirements. Always ensure power is disconnected before making any wiring connections.

Od blizu view of the uxcell V-156-1C25 micro limit switch showing terminals and lever

Slika 3: Spredaj view of the micro limit switch, highlighting the lever and electrical terminals.

5. Načela delovanja

The uxcell V-156-1C25 micro limit switch operates by detecting the presence or absence of a mechanical object. When the lever arm is actuated by a moving part, the internal contacts switch their state:

The Normally Open (NO) contact closes.
The Normally Closed (NC) contact opens.

This change in contact state can be used to trigger or stop a process, activate an indicator, or provide feedback to a control system. The switch is designed for high precision and reliable operation over many cycles.

6. Vzdrževanje

The V-156-1C25 micro limit switch is designed for durability and requires minimal maintenance. However, periodic checks can extend its lifespan and ensure reliable operation.

Pregled: Regularly inspect the switch for any physical damage, loose connections, or excessive wear on the lever arm.
Čiščenje: Due to its IP40 rating, the switch is protected against dust. If dust accumulation is observed, gently clean the exterior with a dry, soft cloth. Avoid using liquids or abrasive cleaners.
Preverjanje aktiviranja: Periodically verify that the switch actuates smoothly and consistently when triggered by the moving part.
Celovitost ožičenja: Prepričajte se, da so vse ožičene povezave varne in brez korozije.

Pred kakršnim koli vzdrževanjem ali pregledom vedno izklopite napajanje.

7. Odpravljanje težav

If the micro limit switch is not functioning as expected, consider the following troubleshooting steps:

Težava	Možen vzrok	rešitev
Stikalo se ne aktivira	Actuator arm misaligned Mehanska obstrukcija Damaged lever arm	Adjust switch position or actuator. Odstranite morebitne ovire. Zamenjajte stikalo, če je poškodovano.
No electrical signal change	Nepravilno ožičenje Zrahljane povezave Napaka notranjega stikala Ni napajanja tokokroga	Verify wiring against diagram (COM, NO, NC). Zategnite vse priključne sponke. Test switch continuity with a multimeter (power off). Replace if faulty. Check power supply to the circuit.
Občasno delovanje	Ohlapna montaža Vibracije Worn contacts	Securely fasten the switch. Address sources of excessive vibration. Zamenjajte stikalo.

If problems persist after attempting these solutions, contact uxcell customer support or consult a qualified electrician.

8. Garancija in podpora

For warranty information and technical support regarding your uxcell V-156-1C25 Micro Limit Switch, please refer to the official uxcell webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Za uveljavljanje garancije shranite račun.

Kontaktni podatki:

Znamka: uxcell
Webspletno mesto: Obiščite trgovino uxcell na Amazonu
Številka modela: V-156-1C25
Številka dela: a24062900ux0690

uxcell V-156-1C25