1. Varnostne informacije
Please read these safety instructions carefully before using the Speedlink EXCELLO NX RGB Headset Stand. Keep this manual for future reference.
- Naprave ne izpostavljajte vlagi, ekstremnim temperaturam ali neposredni sončni svetlobi.
- Naprave ne poskušajte razstavljati ali spreminjati. To lahko razveljavi garancijo in povzroči škodo.
- Use only with compatible USB power sources.
- Hraniti izven dosega otrok.
- Napravo očistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
2. Vsebina paketa
Prepričajte se, da so v paketu prisotni vsi elementi:
- Speedlink EXCELLO NX RGB Headset Stand
- Integrated USB-A Connection Cable (1.2m)
3. Izdelek je končanview
The Speedlink EXCELLO NX is a multifunctional RGB headset stand designed to keep your gaming headset organized while providing additional connectivity options. It features dynamic RGB lighting and an integrated USB hub.
Slika 3.1: Spredaj view of the EXCELLO NX RGB Headset Stand, showcasing its design and illuminated base.
Ključne značilnosti:
- RGB osvetlitev: 9 different lighting modes, controllable via a touch sensor.
- Vgrajeno USB-vozlišče: Includes 1x USB-C port and 2x USB-A ports for connecting additional devices.
- Dizajn, ki prihrani prostor: Keeps your headset organized and desk clutter-free.
- Stabilna podlaga: Non-slip underside ensures secure placement on surfaces.
Figure 3.2: Detail of the integrated USB hub, showing one USB-C and two USB-A ports.
4. Navodila za nastavitev
Follow these steps to set up your EXCELLO NX RGB Headset Stand:
- Razpakirajte stojalo: Carefully remove the headset stand from its packaging.
- Postavite stojalo: Place the stand on a stable, flat surface on your desk. Ensure the non-slip base is fully in contact with the surface.
- Priključitev na napajanje/podatke: Plug the integrated USB-A cable from the headset stand into an available USB-A port on your computer or a compatible USB power adapter. The stand will power on, and the RGB lighting will activate.
- Place Headset: Hang your gaming headset on the designated holder at the top of the stand.
Slika 4.1: Stranski profesionalecfile of the headset stand, illustrating its stable design for holding a headset.
5. Navodila za uporabo
5.1. Nadzor osvetlitve RGB
The EXCELLO NX features a touch sensor for controlling its RGB lighting modes. The touch sensor is located on the base of the stand.
- En dotik: Tap the touch sensor to cycle through the 9 available RGB lighting modes.
- Dolg pritisk: Press and hold the touch sensor for approximately 3 seconds to turn the RGB lighting off. Repeat the long press to turn it back on to the last selected mode or default.
Slika 5.1: Pod kotom view showing the illuminated light strip and the base where the touch sensor is located.
5.2. USB Hub Usage
The integrated USB hub allows you to connect additional devices directly to the headset stand.
- Vrata USB-C: Use this port to connect devices that require a USB-C connection for charging or data transfer.
- Vrata USB-A (x2): Use these two ports to connect standard USB-A devices such as mice, keyboards, USB drives, or for charging other peripherals.
Note: The USB hub operates at USB 2.0 speeds. Ensure your computer's USB port provides sufficient power for all connected devices.
6. Vzdrževanje
To ensure the longevity of your EXCELLO NX RGB Headset Stand, follow these simple maintenance guidelines:
- Čiščenje: Wipe the stand with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials.
- Shranjevanje: When not in use for extended periods, store the stand in a cool, dry place away from direct sunlight.
- Skrb za kabel: Avoid bending or crimping the integrated USB cable excessively.
7. Odpravljanje težav
If you encounter issues with your EXCELLO NX RGB Headset Stand, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| RGB osvetlitev se ne vklopi. | Ni napajanja ali ohlapna povezava. | Ensure the USB-A cable is securely connected to a powered USB port on your computer or adapter. Try a different USB port. |
| USB hub devices are not recognized. | Insufficient power or driver issue. | Connect the stand to a USB port that provides sufficient power. Try connecting devices directly to your computer to rule out driver issues. Disconnect and reconnect the device. |
| RGB lighting is stuck on one mode or unresponsive. | Začasna napaka programske opreme ali težava s senzorjem. | Disconnect the stand from its power source for a few seconds, then reconnect it. Ensure the touch sensor area is clean and unobstructed. |
If the problem persists, please contact Speedlink customer support.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | SL-800911-BK |
| Dimenzije (D׊×V) | 150 x 113 x 275 mm (5.91 x 4.45 x 10.83 palca) |
| Teža | 226 g (8 unč) |
| Vrata USB | 1x USB-C, 2x USB-A (USB 2.0) |
| Povezava z računalnikom | USB-A (integrated cable) |
| Dolžina kabla | 1.2 m |
| Razsvetljava | RGB with 9 modes, touch sensor control |
| barva | Črna |
9. Garancija in podpora
Speedlink products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Speedlink webmesto.
For technical support or customer service inquiries, please visit the Speedlink support page or contact their customer service department directly. Contact information can typically be found on the Speedlink webspletno mesto: www.speedlink.com