ONEVAN sku005270

ONEVAN Cordless Paint Sprayer Instruction Manual

Model: sku005270

1. Uvod

Thank you for choosing the ONEVAN Cordless Paint Sprayer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new paint sprayer. Please read it thoroughly before first use and keep it for future reference.

ONEVAN Cordless Paint Sprayer with key features highlighted
The ONEVAN Cordless Paint Sprayer, showcasing its main features including 2 batteries, copper motor, cordless design, 3 nozzles, 1000ml capacity, and variable speed.

2. Varnostne informacije

OPOZORILO: Pri uporabi električnega orodja vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in telesnih poškodb.

  • Use this product only in well-ventilated areas. Ensure adequate airflow to prevent the accumulation of hazardous fumes.
  • Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and a respirator, to protect against paint particles and fumes.
  • Avoid direct contact with eyes and skin. In case of contact, rinse immediately with plenty of water and seek medical attention if irritation persists.
  • Keep the product and all painting materials away from open flames, sparks, and other ignition sources.
  • Store the product safely after use, out of reach of children and in a dry, secure location.
  • Dispose of paint residues and cleaning solvents according to local environmental regulations.
  • Ensure the battery is fully charged before use and disconnected during assembly, disassembly, or cleaning.

3. Vsebina paketa

Ob razpakiranju preverite, ali so vsi predmeti prisotni in v dobrem stanju:

  • ONEVAN Cordless Paint Sprayer Unit
  • 2 x 3000 mAh Lithium-ion Batteries
  • Polnilec baterij
  • 3 x Copper Nozzles (1.0mm, 1.8mm, 2.5mm)
  • 1000 ml Removable Paint Container
  • Merilna skodelica za viskoznost
  • Cleaning Brush and Needle
  • Uporabniški priročnik

4. Izdelek je končanview

The ONEVAN Cordless Paint Sprayer is designed for various painting applications, offering portability and ease of use. It features a powerful copper motor, an anti-backflow system, and adjustable spray settings.

Diagram of ONEVAN Cordless Paint Sprayer with labeled components
Key components of the ONEVAN Cordless Paint Sprayer: Nut, Jet shape control, Copper nozzle, Flow adjustment, 1000ml container, Quick release switch, Trigger, Power indicator, Soft grip, 3Ah Lithium battery.

Ključne značilnosti:

  • High Viscosity Compatibility: Supports paint viscosity up to 80 Din-s, suitable for latex paints, stains, sealants, polyurethanes, varnishes, lacquers, and chalk paints.
  • Nastavljivi vzorci pršenja: Easily switch between vertical, horizontal, and circular spray patterns by adjusting the air cap.
  • Več velikosti šob: Includes 1.0mm, 1.8mm, and 2.5mm nozzles for different paint types and project requirements.
  • Sistem proti povratnemu toku: Prevents paint leakage and backflow, especially useful for overhead spraying.
  • Zmogljiv bakreni motor: Ensures efficient and uniform spraying, saving time and effort compared to traditional methods.
  • Brezžični dizajn: Powered by two 3000 mAh rechargeable batteries for maximum portability and extended operation.
  • Posoda z veliko prostornino: 1000ml removable container reduces the frequency of refills.

5. Nastavitev

Za pripravo brizgalne pištole za barvanje za uporabo sledite tem korakom:

  1. Polnjenje baterij: Ensure both 3000 mAh Lithium-ion batteries are fully charged before use. Insert a charged battery into the sprayer's handle until it clicks into place.
  2. Priprava barve: Dilute your paint to the appropriate viscosity using the provided measuring cup. The maximum recommended viscosity is 80 Din-s. Pour the diluted paint into the 1000ml container.
  3. Steps for diluting paint and attaching the container to the sprayer
    Step 1: Dilute paint and pour into the container. Step 2: Insert the sprayer into the main body and lock it securely.
  4. Assemble Sprayer: Attach the paint container to the sprayer unit by screwing it on firmly. Ensure it is securely locked to prevent leaks.
  5. Izberite šobo: Choose the appropriate nozzle size (1.0mm, 1.8mm, or 2.5mm) based on your paint type and desired spray pattern. The 1.0mm nozzle is suitable for thinner materials, while the 2.5mm nozzle is for thicker paints.
  6. Steps for choosing and adjusting the nozzle and spray pattern
    Step 3: Choose the appropriate nozzle. Step 4: Change the nozzle to adjust the jet pattern.
  7. Prilagodite vzorec pršenja: Rotate the air cap to select your desired spray pattern: vertical, horizontal, or circular.
  8. Testni sprej: Before applying paint to your project, perform a test spray on a piece of cardboard or scrap material to ensure the desired pattern and flow are achieved. Adjust the flow regulator as needed.

6. Navodila za uporabo

Once assembled and filled, your ONEVAN Cordless Paint Sprayer is ready for use.

  1. Vklop: Press the trigger to start the sprayer. The power indicator lights will show the battery level.
  2. Prilagodi pretok: Use the flow adjustment knob to control the amount of paint being sprayed. Start with a lower setting and increase as needed.
  3. Ohranjanje razdalje: Hold the sprayer approximately 6-12 inches (15-30 cm) from the surface, depending on the desired coverage and paint type.
  4. Celotni udarci: Move the sprayer in smooth, even strokes, overlapping each pass slightly to ensure uniform coverage. Avoid tilting the sprayer excessively to prevent paint starvation or uneven application.
  5. Anti-Backflow Feature: The anti-backflow design allows for spraying ceilings and other overhead surfaces without paint leaking back into the unit.
  6. Image showing adjustable flow regulator and different spray patterns: circular, vertical, horizontal
    The adjustable flow regulator and various spray patterns: Circular (45° for corners/edges), Vertical (180° for vertical spraying), and Horizontal (90° for horizontal spraying).
  7. Aplikacije: This sprayer is suitable for a wide range of indoor and outdoor projects, including painting fences, doors, furniture, cabinets, walls, and ceilings.
  8. Image showing a test spray on cardboard and a user spraying a ceiling
    Step 5: Perform a test spray on cardboard before use. Step 6: Example of proper usage, including spraying a ceiling.

7. Vzdrževanje in čiščenje

Proper cleaning after each use is crucial for maintaining the sprayer's performance and extending its lifespan.

  1. Odklop napajanja: Pred čiščenjem ali kakršnim koli vzdrževanjem vedno odstranite baterijo.
  2. Prazna posoda: Empty any remaining paint from the 1000ml container back into its original can.
  3. Razstaviti: Unscrew the paint container and remove the nozzle assembly. The sprayer's design allows for easy disassembly by rotating and pushing the front section.
  4. Image illustrating how to rotate and push to disassemble the sprayer
    Disassembly mechanism: Rotate 90 degrees and push to separate the front section from the main body for cleaning.
  5. Čiste komponente: Wash the paint container, nozzles, and other paint-contacting parts thoroughly with warm soapy water or an appropriate cleaning solvent for the type of paint used. Use the provided cleaning brush and needle to clear any blockages in the nozzles.
  6. Image showing sprayer components being cleaned in water
    Cleaning the nozzles and paint container in water to prevent clogging and ensure longevity.
  7. Brisanje: Zunanjost škropilnice obrišite zamp cloth. Do not immerse the main motor unit in water.
  8. Sušenje in shranjevanje: Ensure all parts are completely dry before reassembling. Store the sprayer and its components in a clean, dry place.

8. Odpravljanje težav

Če imate težave z brizgalko barve, si oglejte naslednje pogoste težave in rešitve:

TežavaMožen vzrokrešitev
Brez pršenja ali šibko pršenjeClogged nozzle; Insufficient paint dilution; Low battery; Air cap not properly aligned.Clean nozzle with needle; Dilute paint further; Recharge or replace battery; Adjust air cap.
Neenakomeren vzorec pršenjaIncorrect nozzle selection; Air cap misalignment; Inconsistent spraying distance.Select appropriate nozzle; Adjust air cap; Maintain consistent distance and speed.
Paint leaks from nozzle or containerLoose connections; Damaged seals; Overfilled container.Tighten all connections; Inspect and replace seals if damaged; Do not overfill container.
Sprayer motor not runningBaterija ni pravilno vstavljena; Baterija je prazna; Okvarjeno stikalo.Ensure battery is fully inserted; Recharge battery; Contact customer support if switch is faulty.

Če težava po poskusu teh rešitev še vedno obstaja, se obrnite na podporo strankam.

9. Specifikacije

FunkcijaSpecifikacija
Številka modelasku005270
Dimenzije (D x Š x V)22 x 22 x 26.5 cm
Teža2.6 kg
Vir napajanjaNapajanje na baterije
Vrsta baterije2 x Lithium-ion (3000 mAh each)
Prostornina rezervoarja1000 ml
Velikosti šob1.0 mm, 1.8 mm, 2.5 mm (Copper)
Največja viskoznost80 din
Največji pritisk12 PSI
MaterialPlastika, kovina, baker
Priporočena uporabaSlikanje

10. Garancija in podpora

ONEVAN products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. If you have any questions, require technical assistance, or need to report a problem, please contact ONEVAN customer support through the retailer's platform or the official brand webmesto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.