1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Gebildet 19mm 15A/220VAC LED Blue Latching Push Button Switch. This all-metal switch is designed for various applications requiring a manual reset, boat reset, instrumentation, entry protection, or household appliance control. It features a solid, crisp push feedback and a comfortable blue LED light. Its IP65 waterproof rating allows for use in humid environments, and the metal shell tolerates vibrations and other harsh environmental conditions.
2. Varnostne informacije
- Pred namestitvijo ali vzdrževanjem vedno izklopite napajanje, da preprečite električni udar.
- Prepričajte se, da so vse žične povezave varne in pravilno izolirane.
- Preverite, ali voltage and current ratings of the switch match your application requirements.
- Če niste prepričani glede električne napeljave, naj namestitev opravi usposobljena oseba.
- Do not exceed the specified electrical ratings (15A, 220VAC).
3. Značilnosti izdelka
- Material: Ohišje iz nerjavečega jekla za vzdržljivost in odpornost proti koroziji.
- Vrsta operacije: Latching (Push ON, Push OFF).
- LED indikator: Blue LED, 220VAC.
- Ocena vodoodpornosti: IP65, suitable for wet or dusty environments.
- Kompaktna zasnova: Short type with a total height of 2.5 cm, ideal for limited space installations.
- Struktura stika: SPST (Single Pole Single Throw), 1NO (Normally Open).
- Visoka nazivna moč: 15A/220VAC.
Figure 1: Compact design for limited space installation.
Figure 2: IP65 waterproof rating ensures protection against water and dust.
4. Nastavitev in namestitev
4.1 Vsebina paketa
- 1 x Gebildet 19mm Latching Push Button Switch
- 1 x Wiring Diagram (often included with the switch)
4.2 Montaža
- Prepričajte se, da je montažna površina čista in ravna.
- Drill a mounting hole with a diameter of 19mm (0.74 inches).
- Insert the switch into the drilled hole.
- Secure the switch with the provided nut. The recommended nut torque is 5-14 Nm.
- The switch is suitable for panel thickness between 1-9 mm.
Figure 3: Detailed dimensions and specifications for mounting.
4.3 Navodila za ožičenje
The switch features 4 pins for connection. A simplified wiring diagram is provided to assist with installation. Ensure correct polarity for the LED if applicable, though the provided diagram typically shows AC connections.
- Vrsta ožičenja: Solder pin.
- Terminali: Typically two for the switch contacts (NO) and two for the LED.
Figure 4: Wiring diagram showing two common connection methods.
Top Diagram: Device ON, Light ON; Device OFF, Light OFF. This configuration illuminates the LED only when the switch is activated and the device is powered.
Bottom Diagram: Light Always ON. This configuration keeps the LED illuminated constantly, regardless of the switch's ON/OFF state, as long as power is supplied to the LED circuit.
5. Navodila za uporabo
This is a latching push button switch. Its operation is straightforward:
- Prižgati: Press the button once. The button will remain in the depressed position, and the connected device will activate. The blue LED will illuminate (if wired for simultaneous operation).
- Ugasniti: Press the button again. The button will return to its original position, and the connected device will deactivate. The blue LED will turn off (if wired for simultaneous operation).
Figure 5: Visual representation of the switch in ON and OFF states.
6. Vzdrževanje
The Gebildet push button switch is designed for durability and requires minimal maintenance.
- Čiščenje: Uporabite mehko, damp cloth to clean the exterior of the switch. Avoid abrasive cleaners or solvents.
- Pregled: Občasno preverjajte tesnost priključkov in morebitne znake obrabe ali korozije.
- Vodoodporna funkcija: The IP65 rating protects against dust and low-pressure water jets. While suitable for humid environments, avoid prolonged submersion or high-pressure water exposure.
7. Odpravljanje težav
- Switch Not Activating Device:
- Check all wiring connections according to the diagram (Figure 4).
- Ensure power supply to the switch and device is active.
- Verify the device itself is functioning correctly.
- LED ne sveti:
- Confirm the LED wiring is correct as per the diagram (Figure 4).
- Check if the power supply to the LED circuit is present.
- Ensure the switch is in the ON position if the LED is wired for simultaneous operation.
- Switch Not Latching/Unlatching:
- Prepričajte se, da je gumb trdno pritisnjen.
- Inspect for any physical obstruction or damage to the button mechanism.
8. Specifikacije
| Proizvajalec | Obrazec |
| Številka modela | E1417 |
| Velikost namestitve luknje | 19 mm (0.74 palcev) |
| Nazivna voltage | 220VAC |
| Nazivni tok | 15A |
| Nazivna moč | 4400 vatov |
| Vrsta operacije | Latching (Push ON, Push OFF) |
| LED barva | Modra |
| Kontaktni material | Srebrna zlitina |
| Material lupine | Nerjaveče jeklo |
| Zaščitni razred | IP65 |
| Električna življenjska doba | ≥200,000-krat |
| Mehansko življenje | ≥1,000,000-krat |
| Temperatura okolja | -20°C ~ +50°C |
| Dimenzije (D x Š x V) | 12 x 9 x 2.3 cm |
| Teža | 10 gramov |
9. Informacije o garanciji
Gebildet products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Gebildet webali se obrnite na prodajno mesto. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.
10. Podpora
If you encounter any issues or have questions regarding your Gebildet push button switch that are not covered in this manual, please contact Gebildet customer support through their official website or the retailer from whom you purchased the product. Provide your model number (E1417) and a detailed description of the issue for faster assistance.